Sponsored Content
Operating Systems Solaris Xsun hangs crashes with TSI card in Solaris 10 Post 302456880 by paz9 on Sunday 26th of September 2010 03:55:37 PM
Old 09-26-2010
Xsun hangs or crashes with TSI card in Solaris 10

Upgrading from Solaris 8 to Solaris 10 on 40+ workstations -- desktop Unix Sparc systems of various ilk: Netra T1, Sunblade-100, Sunfire. Many of these systems are not meant for the desktop, but we've installed TSI cards like GFX-400, GFX-200 series cards for multi-head operation. This is the hardware setup, it cannot be changed.
Things are going well, except that the Xsun server seems to crash or hang depending on the TSI card in use. This seems to be prevalent on the SunBlade systems which may have a built-in video card as well, but like I said we have installed multi-head cards too. I've installed one patch: 119059 which seemed to help for a while, but now the problem is back.
If anyone has had issues with TSI/GFX cards, that would be helpful to hear about. I've installed the latest drivers from TSI, but that did not fix the problem. On the GFX-400 machine, we actually had a crash and a core. It seems at issue is a memset() call in an mko library routine called ddxPolyPoint().

Last edited by paz9; 12-15-2010 at 09:25 AM.. Reason: Updated information
 

10 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Samba crashes on Solaris with Veritas Cluster

We recently transferred our Samba server to a cluster of two Sun systems running Solaris 9 with Veritas Cluster Server. We used Samba 3.0.7. Since then Samba seems to crash every 2 to 3 days, always around noon. The symptoms are that at first people who are connected lose the ability to access... (1 Reply)
Discussion started by: rhfrommn
1 Replies

2. Solaris

Boot hangs up on solaris

Hi all, I have a SUN server Sun-Fire-V890 running solaris 9, with a remote system console . Both the IP adresses of the server and the console are in a private network (address 10.67.xxx). For some reasons I need to give the access to the server from outside address 194.xxx, but I prefer that... (2 Replies)
Discussion started by: aribault
2 Replies

3. Solaris

Solaris 10 crashes upon boot after TUN driver installed

Hey! I compiled TUN 1.1 driver on my Solaris 10 64bit, and everything was working fine, all the commands for installation were successfull (add_drv, devfsadm -i tun ... etc.) and the driver was working fine as I got OpenVPN server up and running with successful clients attached. My only problem... (2 Replies)
Discussion started by: TomSu
2 Replies

4. Solaris

solaris hangs after booting

Hi, We've got a Sun Fire V245 that's failing to boot from either boot disk (mirrored using SVM). It simply hangs after loading a few modules: Sun Fire V245, No Keyboard Copyright 2006 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.22.22, 1024 MB memory installed, Serial... (5 Replies)
Discussion started by: badoshi
5 Replies

5. Solaris

Solaris 10 system hangs

Solaris 10 (Sun V210) System hangs every couple of months. Have to go into ALOM to reset. I did a consolehistory report and seen this in it. Failed to exec inetd_start method of instance svc:/network/bootps/udp:default: I/O error WARNING: /pci@1c,600000/scsi@2 (glm0): Resetting... (3 Replies)
Discussion started by: Joeentech
3 Replies

6. Solaris

Frequent crashes in ESXi virtual Solaris machine

Anybody have any ideas on what could be causing this crash? This an x86 virtual machine I have running in ESXi at my house, so obviously no way to send the data to Oracle for analysis. Just curious if anyone has any ideas. I suspect motherboard problems with the x86 hardware, as I already... (4 Replies)
Discussion started by: christr
4 Replies

7. Solaris

Solaris ssh client hangs when connecting to another Solaris machine

Got a strange problem. I have 4 Solaris servers all configured the same, Solaris 10 x86 update 10. When I try to ssh from one Solaris 10 server to another server ssh hangs. I have an identical server and when I try this everything works fine. The weird thing is if I am root on the server... (1 Reply)
Discussion started by: ccj4467
1 Replies

8. Solaris

Solaris 10 - hangs during boot

Power server up runs through diagnostics. Goes to the boot section and then the bit where the cursor is spinning and thats it. Hangs completely. Any ideas? (10 Replies)
Discussion started by: psychocandy
10 Replies

9. Solaris

Solaris 10 - ufsdump hangs

Anyone ever see an issue where ufsdump 'hangs' after the IV Pass? Normally, it will update with an estimate of how long it will take to complete...and update the info every 20 minutes. I'm running the following command: root# ufsdump 0f - /fsmount | ( cd /zfs/newfsmount ) ; ufsrestore rf - )... (2 Replies)
Discussion started by: RTM
2 Replies

10. Solaris

Solaris hangs (Firefox)

dear members, i am a newbie to solaris 11.3, and deeply impressed. On my test pc (Lenovo M90), however, using the internet hangs the system from time to time; initializing the connecting (WLAN) during installation (via the live cd) took two attempts as well. Maybe someone has a solution... (7 Replies)
Discussion started by: RichardLichten
7 Replies
TSI(5)								File Formats Manual							    TSI(5)

NAME
tsi - Transmission Subscriber Identification (TSI) access control list DESCRIPTION
The HylaFAX configuration parameter QualifyTSI specifies whether or not the identity of a calling facsimile machine should be checked against an access control list before receiving facsimile. If QualifyTSI is non-null, then only messages from facsimile machines identi- fied in the file specified by the string (typically etc/tsi) will be accepted. Patterns are specified one per line and must conform to the regular expressions syntax specified by POSIX 1003.2; see re_format(7). Com- ments may be included; they are introduced with the ``#'' character and extend to the end of the line. Any trailing white space on a line is ignored (for convenience when comments are used). If a line begins with ``!'', then the regular expression identifies clients that should be rejected; otherwise regular expressions identify clients whose transmissions should be accepted. The order of patterns in a TSI file is important. When a facsimile is to be received, the fax server will compare the client's TSI against the patterns in the access control list in the order in which they appear in the file. The first pattern that matches the client TSI is used to decide whether to accept or reject the facsimile. If no patterns match the client TSI then the facsimile is rejected. Thus if you want to accept all but a restricted set of TSI the last line in the file should be ``^.*$''. Note that regular expression patterns should be written to match a TSI exactly. That is, patterns should be of the form: ^<pattern>$ where the ``^'' and ``$'' characters are used to specify the start and end of the matching TSI. Additionally, regular expression patterns should handle white space that may appear in known locations. For example, ^([+]1){1}[ .-]*415[ .-]*555[ .-]*1212.*$ matches the following TSI strings: +1.415.555.1212 415 555 1212 1-415-555-1212 Finally, note that regular expressions can be used to specify many TSI with one pattern. NOTES
It would be nice if TSI that were to be matched against were placed in some canonical form (e.g. remove white space and white space-like characters). This is, however, problematic, because some facsimile machines permit any printable ASCII string to be sent as a TSI. SEE ALSO
faxgetty(8), re_format(7), hylafax-config(5) December 5, 1994 TSI(5)
All times are GMT -4. The time now is 09:00 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy