09-22-2010
Quote:
As i understand and correct me if i a wrong, when you say CMOS settings do you
refer through BIOS settings? Legacy mode has to be configured through the BIOS?
Yes that is the correct assumption. However, I am surprised that you have a P3 with this capability. 5.07 Will run on socket 478 and 775 P4 motherboards.
10 More Discussions You Might Find Interesting
1. AIX
My root disk is failed and how to replace the root disk in AIX.
Can u give a detailed explanation in step wise.
Pls give the answer taking different scenarios.
Regards
Praveen (1 Reply)
Discussion started by: chinnu_mulakala
1 Replies
2. UNIX for Dummies Questions & Answers
Actually have a few different issues, wondering if I could get input on (tried reading/searching for an answer, with no luck)
1. Have a v240 running sol9 that needs a bad disk replaced. So, here are the steps I took:
a. detached from mirroring
b. cleared mirroring (metaclear)
c.... (4 Replies)
Discussion started by: mr.moralito
4 Replies
3. Filesystems, Disks and Memory
Good morning,
I have a problem replacing a disk with raid-5 volumes.
An hardware error was occurred from a disk c9t3 so all slices were in maintenace. Every slice is part of a raid-5 volume. Any replica is present.
Following Volume manager manual for replacing a disk, I have:
- phisically... (0 Replies)
Discussion started by: bonovox
0 Replies
4. Solaris
solaris os run on X86.
bootdisk have been mirrored.but there is one disk miss,I want to replace the fail disk,but after I replace the disk,the system can't boot!
pls help! (2 Replies)
Discussion started by: netxjman
2 Replies
5. Solaris
Dear all
Please can any one explain me how to replace failed disk in Solaris 10.
Please tell me the step by step procedure. (9 Replies)
Discussion started by: suneelieg
9 Replies
6. Solaris
-bash-3.00# zpool detach zonepool c1t1d0
cannot detach c1t1d0: only applicable to mirror and replacing vdevs
-bash-3.00# zpool remove zonepool c1t1d0
cannot remove c1t1d0: only inactive hot spares, cache, top-level, or log devices can be removed
-bash-3.00# zpool offline zonepool c1t1d0... (3 Replies)
Discussion started by: LittleLebowski
3 Replies
7. Ubuntu
Hi,
I have an Ubuntu system which I have an faulted mirror.
I trying to replace the disk, but I'm stuck on that it boots and only showing GRUB
GRUB
## ## End Default Options ##
title Ubuntu 8.04.4 LTS, kernel 2.6.24-26-server
root (hd0,0)
kernel ... (0 Replies)
Discussion started by: jld
0 Replies
8. HP-UX
Scenario1:
VG00 lvm,not mirrored,2 disk of 36GB vg size
VG00 size is under 30G.
Is possible to remove a disk of 36GB and replace "on fly"
with a disk of 300GB on VG00?
Thanks (6 Replies)
Discussion started by: Linusolaradm1
6 Replies
9. Solaris
issue,
I had a zpool which was full
pool_temp1 199G 197G 1.56G 99% ONLINE -
pool_temp2 199G 196G 3.09G 98% ONLINE -
as you can see, full
so I replaced with a larger disk.
zpool replace pool_temp1 c3t600144F0FF8BA036000058CC1DB80008d0s0... (2 Replies)
Discussion started by: rrodgers
2 Replies
10. Solaris
Hello,
I see hard and transport errors on all disks under treso pool and looks like some data corruption too. I want to take backup before, I reboot and replace disk. As of now, there are no slots free on server, so one option is, to break mirror, remove second disk (I need two disks, because... (5 Replies)
Discussion started by: solaris_1977
5 Replies
NVRAM(4) BSD Kernel Interfaces Manual NVRAM(4)
NAME
nvram -- non-volatile RAM
SYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file:
device nvram
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
nvram_load="YES"
DESCRIPTION
The nvram driver provides access to BIOS configuration NVRAM on i386 and amd64 systems.
PC motherboard uses a small non-volatile memory to store BIOS settings which is usually part of its clock chip and sometimes referred as
``CMOS SRAM''. This driver exposes bytes 14 through 128 of the NVRAM, or a total of 114 bytes, at offset zero of the device file /dev/nvram.
This driver is useful for cloning machines that shares the same hardware configuration and need same BIOS setting tweaks.
IMPLEMENTATION NOTES
The BIOS NVRAM's bytes 16 through 31 are checksummed at byte 32. This driver does not take care for these checksums.
EXAMPLES
Backup existing BIOS NVRAM to nvram.bin:
dd if=/dev/nvram of=nvram.bin
Restore BIOS NVRAM from nvram.bin:
dd if=nvram.bin of=/dev/nvram
SEE ALSO
dd(1)
HISTORY
The nvram device driver first appeared in FreeBSD 6.4.
AUTHORS
The nvram device driver was written by Peter Wemm. This manual page was written by Xin LI.
BSD
February 8, 2010 BSD