Hi Frdz
I have a problem like.
I need to transfer a file from source to destination (different systems with different IPs) using "scp" command and before transfer the file i have to check the file is available in destination or not, if it is there no need to transfer, otherwise we have to... (5 Replies)
I have a shell script which uses SCP command to transfer the files from one server to another server. The files are getting transferred successfully, but the problem is the files transferred to the destination server didnot have the permissions as that of the files on the source server.
Command... (5 Replies)
Hi,
I have an ancient SunOS 5.6 and I have to backup all the data onto it. I have tried connecting a tape drive but it does not boot up (something to do with its SCSI configuration I guess) when I do.
So I am left with the possibility of copying files remotely from the SunOs box to another... (3 Replies)
I am not able to throw a file from server173 to server067
i.e.
wlsuser@server173> scp /tmp/harsha.txt wlsuser@server067:/tmp
fails
However, I am able to pull a file from server173 onto server067's /tmp dir
wlsuser@server067> scp wlsuser@server173:/tmp/harsha.txt /tmp... (2 Replies)
Hi all,
I want to transfer only modified files from one unix server to another unix sever ,tried hard but not succeeded please help me out to resolve it. The script is as below :wall:
ssh user@hostname <<EOT >files.txt
cd /x/y
find . -mtime -0 -type f |\
while read file
do
echo $file... (8 Replies)
Whenever I transfer file through SCP between two server it gives below given message.....Is there a way to avoid it....
Target server : newyork
$ scp ABC27801.iue newyork:./iABC/x0017801.iue
Message
=====
This system is for the use of authorized users only. Individuals using this... (1 Reply)
I have 3 AIX server namely - Server 1 , Server 2 and Server 3.
And have done SCP setup between Server 1 and Server 2 so that i dont have to give password when i transfer file from Server 1 to Server 2 by setting public key between the server.
Q1. If the unix password of the target server... (3 Replies)
On unix AIX server, when I am trying to transfer file from one directory to another directory on the same server through a program(where i call the script) it gives error "Lost Connection". (5 Replies)
I am testing the following command to transfer a file from my server (AIX 5.2) to another server. I was able to generate the keys and sent them the public key.
scp -v -P 4030 /home/lawson/.ssh/jimtest.txt someuser@some.ftpsite.net:/Inbound/jimtest.txt > jimtest_out.txt 2>&1
Based on... (3 Replies)
I am trying to transfer a zip file of around 30 MB in my automation script using scp from system A to B.
When I manually do scp, file is complete transferred but when automation shell script runs it, zip file is not completely transferred.
Stack Trace while doing manual :
Executing:... (1 Reply)
Discussion started by: Shaishav Shah
1 Replies
LEARN ABOUT LINUX
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)