09-21-2010
..great..
..but finaly i solved the problem unplugging the netmgt interface.
Probably something was going bad with that interface and when unplugged it the sc> has slowly came up and then a normal reset solved everything
..
Now everything is working good...
Cheers guys..and thank you!
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
No, its not a movie, its a command to get you from the sc> ALOM prompt back to the console or ok prompt.
You must log into the ALOM, then to jump back to the console enter "console -f".
Problem is that this leaves you logged in on the ALOM.
Question: is there an escape key sequence to get... (1 Reply)
Discussion started by: jsy
1 Replies
2. Solaris
Every time I would try to send a break to my T2000 I would get this
Debugging requested; hardware watchdog suspended.
c)ontinue, s)ync, r)eset?
I couldn't get into OBP.
Here's what I found to do...
sc> bootmode
Bootmode: normal
sc> bootmode reset_nvram
sc> bootmode... (3 Replies)
Discussion started by: mediis
3 Replies
3. Solaris
Hi,
I have forgot the sc and console login password in sun v125 server,
can anyone suggest me how to reset sc password in sun v125 server.
Thanks
Rjs (3 Replies)
Discussion started by: rajasekg
3 Replies
4. Solaris
Hi Everyone.
What is the differece b/n ALOM and ALOM CMT Service processor.
I am trying reset ALOM login/passwd using scadm utility on T2000, while I am googling I came cross ALOM CMT doesnt support scadm utility, but ALOM supports.
Not sure how different are these.
Thanks, (0 Replies)
Discussion started by: bobby320
0 Replies
5. Solaris
Hi ,
How to reset ALOM/SC password for Solaris box Sun Fire T-200
Thanks (5 Replies)
Discussion started by: chetansingh23
5 Replies
6. Solaris
Hello forum,
I have a SUN v250 at home that I have to practice Solaris. I currently have Solaris 9 installed and the ALOM Sun(tm) Advanced Lights Out Manager 1.5.2.
From the ALOM I want to access the console.
sc> console -f
Enter #. to return to ALOM.
after that there is no response.... (19 Replies)
Discussion started by: br1an
19 Replies
7. Solaris
Hi guys,
I'm new with solaris.
I just received sunfire T2000 server.
Problem:
ALOM keep hang/stuck/jammed.
Steps do before it hang :
1. Connect to T2000 (using RJ45 - DB9 cable)
2. Open putty, connect via serial.
3. Power on the server.
4. Its loading.
5. then, hang.
... (1 Reply)
Discussion started by: rajasraf
1 Replies
8. Solaris
Hi,
How to set ip address on eth0 for access ssh from ALOM? Is it possible? Now i cannot access it because don't have VGA.
I keep try to access using ssh. Please guide me.
Thanks. (16 Replies)
Discussion started by: mzainal
16 Replies
9. Hardware
Hi all,
I have some problems with the fan FT0.F0, which looks like has a problem with the PROM/ALOM ( I am nor sure who).....but, in fact, the fan is working properly even in other V440 Sparc Server.
We checked HW comunication between Fan and the MotherBoard, and we think is a problem of... (8 Replies)
Discussion started by: proof_enrique
8 Replies
10. Solaris
Hi all,
I got a v215 but the login credentials are unknown. I plug the serial management RS232-RJ45 and get the output on the terminal. I reseted NVRAM and battery but I can't use the default login still. After these operations the output from boot is as such ;
ALOM POST 1.0
Status =... (21 Replies)
Discussion started by: y33t
21 Replies
LEARN ABOUT DEBIAN
slagts.f
slagts.f(3) LAPACK slagts.f(3)
NAME
slagts.f -
SYNOPSIS
Functions/Subroutines
subroutine slagts (JOB, N, A, B, C, D, IN, Y, TOL, INFO)
SLAGTS
Function/Subroutine Documentation
subroutine slagts (integerJOB, integerN, real, dimension( * )A, real, dimension( * )B, real, dimension( * )C, real, dimension( * )D, integer,
dimension( * )IN, real, dimension( * )Y, realTOL, integerINFO)
SLAGTS
Purpose:
SLAGTS may be used to solve one of the systems of equations
(T - lambda*I)*x = y or (T - lambda*I)**T*x = y,
where T is an n by n tridiagonal matrix, for x, following the
factorization of (T - lambda*I) as
(T - lambda*I) = P*L*U ,
by routine SLAGTF. The choice of equation to be solved is
controlled by the argument JOB, and in each case there is an option
to perturb zero or very small diagonal elements of U, this option
being intended for use in applications such as inverse iteration.
Parameters:
JOB
JOB is INTEGER
Specifies the job to be performed by SLAGTS as follows:
= 1: The equations (T - lambda*I)x = y are to be solved,
but diagonal elements of U are not to be perturbed.
= -1: The equations (T - lambda*I)x = y are to be solved
and, if overflow would otherwise occur, the diagonal
elements of U are to be perturbed. See argument TOL
below.
= 2: The equations (T - lambda*I)**Tx = y are to be solved,
but diagonal elements of U are not to be perturbed.
= -2: The equations (T - lambda*I)**Tx = y are to be solved
and, if overflow would otherwise occur, the diagonal
elements of U are to be perturbed. See argument TOL
below.
N
N is INTEGER
The order of the matrix T.
A
A is REAL array, dimension (N)
On entry, A must contain the diagonal elements of U as
returned from SLAGTF.
B
B is REAL array, dimension (N-1)
On entry, B must contain the first super-diagonal elements of
U as returned from SLAGTF.
C
C is REAL array, dimension (N-1)
On entry, C must contain the sub-diagonal elements of L as
returned from SLAGTF.
D
D is REAL array, dimension (N-2)
On entry, D must contain the second super-diagonal elements
of U as returned from SLAGTF.
IN
IN is INTEGER array, dimension (N)
On entry, IN must contain details of the matrix P as returned
from SLAGTF.
Y
Y is REAL array, dimension (N)
On entry, the right hand side vector y.
On exit, Y is overwritten by the solution vector x.
TOL
TOL is REAL
On entry, with JOB .lt. 0, TOL should be the minimum
perturbation to be made to very small diagonal elements of U.
TOL should normally be chosen as about eps*norm(U), where eps
is the relative machine precision, but if TOL is supplied as
non-positive, then it is reset to eps*max( abs( u(i,j) ) ).
If JOB .gt. 0 then TOL is not referenced.
On exit, TOL is changed as described above, only if TOL is
non-positive on entry. Otherwise TOL is unchanged.
INFO
INFO is INTEGER
= 0 : successful exit
.lt. 0: if INFO = -i, the i-th argument had an illegal value
.gt. 0: overflow would occur when computing the INFO(th)
element of the solution vector x. This can only occur
when JOB is supplied as positive and either means
that a diagonal element of U is very small, or that
the elements of the right-hand side vector y are very
large.
Author:
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Date:
November 2011
Definition at line 162 of file slagts.f.
Author
Generated automatically by Doxygen for LAPACK from the source code.
Version 3.4.1 Sun May 26 2013 slagts.f(3)