09-10-2010
Hergp, thanks for your response.
(By way of clarification: I do, of course, have the power supplies still in the machine - they're all reporting good. I had been removing the CPU DC power modules as part of the diagnostic).
This machine did finally restart - and least got to POST. And it did so - interestingly - with no CPUs, memory or DC power modules.
Then, after lots of vacuuming and re-seating of components one-by-one, it appeared that one DC power module may have been the culprit. Another re-seat, and restart, and it's been running ever since. Has anyone ever heard of an intermittent problem with a DC power module? Should we be worried?
Still don't know what took it down, but we do have some evidence of a late-night power spike, so, am hoping that was the cause...
(No, no power conditioning on this machine for the moment - it's a testbed, so we're not too concerned with its real-world reliability for the moment.)
7 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
Hi,
I'm facing problem in connecting a Raid A1000 to E250 and E450. ( Both machines with Solaris 2.6 OS and patched, with different
scsi-initiator-ids - 7 & 3 ).
BTW, I'm not using this setup to access raid data from both machines simultaneously. There is Veritas Cluster Server monitoring... (1 Reply)
Discussion started by: shibz
1 Replies
2. Filesystems, Disks and Memory
Does anyone know what steps I have to follow to move an A1000 between two E450's. Im running solaris 2.6 (1 Reply)
Discussion started by: MBGPS
1 Replies
3. Solaris
Hi,
I'm working with an E450 server and it has one network card configured with 2 local and internet IP addresses.
Presently, the local IP is set as the primary address while teh Internet IP is set as the secondary address. I wish to change this and make the local IP secondary and the... (2 Replies)
Discussion started by: Ronny
2 Replies
4. Solaris
Hi all,
We are getting CPU warning temeratures sometimes and our server is shutdown at 80 degree F. We notice our server room temperature at 18 degree celcius . Our we have already cleaned dust from grills near CPU Fan . CPU fans are working (moving) . It is our experience that CPU... (5 Replies)
Discussion started by: Hitesh Shah
5 Replies
5. Solaris
I wanted to configure a second NIC card on a different IP on my Sun E450 server.
Currently, I have hme0.
when I ran the command : ifconfig hme1 <ip address> netmask <subnet mask> broadcast + up
I got the following error message: ifconfig: SIOCGIFFLAGS: hme1: no such interface
Any idea... (3 Replies)
Discussion started by: Remi
3 Replies
6. UNIX for Dummies Questions & Answers
Hi
I had deleted important files from my company server :(
the server is HPUX
and i don't know how to undo rm command or how to restore the files ..
iam appreciate for any help
Thanx ... (5 Replies)
Discussion started by: Eisa
5 Replies
7. Solaris
I have installed a qlogic HBA card in an E450 Solaris 9 with all the SUNW packages and the latest EPROM version. Configuration reboot was done. An orange light flashes to the right of where the card plugs into the fiber cable after booting, and the following error apprears at the start of the boot... (9 Replies)
Discussion started by: floydm
9 Replies
LEARN ABOUT CENTOS
poweroff
HALT(8) halt HALT(8)
NAME
halt, poweroff, reboot - Halt, power-off or reboot the machine
SYNOPSIS
halt [OPTIONS...]
poweroff [OPTIONS...]
reboot [OPTIONS...]
DESCRIPTION
halt, poweroff, reboot may be used to halt, power-off or reboot the machine.
OPTIONS
The following options are understood:
--help
Prints a short help text and exits.
--halt
Halt the machine, regardless of which one of the three commands is invoked.
-p, --poweroff
Power-off the machine, regardless of which one of the three commands is invoked.
--reboot
Reboot the machine, regardless of which one of the three commands is invoked.
-f, --force
Force immediate halt, power-off, reboot. Do not contact the init system.
-w, --wtmp-only
Only write wtmp shutdown entry, do not actually halt, power-off, reboot.
-d, --no-wtmp
Do not write wtmp shutdown entry.
--no-wall
Do not send wall message before halt, power-off, reboot.
EXIT STATUS
On success, 0 is returned, a non-zero failure code otherwise.
NOTES
These are legacy commands available for compatibility only.
SEE ALSO
systemd(1), systemctl(1), shutdown(8), wall(1)
systemd 208 HALT(8)