Here's the command I'm running:
# echo "hi" | awk '{etime = system("hostname") ; close("hostname") ; print etime""}'
And here's the ouput:
server.domain.tld
0
Why in the world is that second line, the one that's just "0", there? Many thanks in advance. (2 Replies)
I have used m4 in the past to generate source code where aesthetics and space were of no consequence . Now I am using it to generate script and program templates .
So here is an excerpt from my m4 file for producing a generic bash script:
dnl `$Id$'
define(`START_SCRIPT',`#!/bin/bash... (8 Replies)
Hi, I'm using a while-loop in an awk script. If it matches a regular expression, it prints a line. Unfortunately, each line that is printed in this loop is followed by an extra character, "1".
While-statement extracted from my script:
getline temp;
while (temp ~ /.* x .*/) print temp... (3 Replies)
Hi,
I have a .csv file which as empty lines with comma and some special characters in 3rd column as below.
Source data
1,2,3,4,%#,6
,,,,,,
1,2,3,4,5,6
Target Data
1,2,3,4,5,6I need to remove blank lines and special charcters
I am trying to get this using the below awk
awk -F","... (2 Replies)
Hi,
Since today, with csh or tcsh, if I do 'ls files* > list',
every lines end with an extra space!
What happenned?
What can I do to go back when there was no extra space?
If I change to bash, there's no extra space.
Thanks,
Patrick
---------- Post updated at 03:19 PM... (1 Reply)
Hi Gurus,
I have a file which contains some special char or space.
when using cat -evt I can see the file as following:
0,"0000","abc/def aaa ... (6 Replies)
I created a awk state to calculate the number of success however when the query runs it has a leading zero. Any ideas on how to remove the leading zero from the calculation?
Here is my query:
cat myfile.log | grep | awk '{print $2,$3,$7,$11,$15,$19,$23,$27,$31,$35($19/$15*100)}'
02:00:00... (1 Reply)
Hello,
I have a requirement where i have to spool some data to a file. i have achived the desired target but m facing one issue. i have attached the script and the output.
i checked the data length in the table but it is only 45 for column 1.
can you tell me how to remove these extra... (4 Replies)
Hi All
I am trying to perform the below operation -count=`cat abc.txt | wc -l`
echo$count
5
Head=Start"$DATE"00000"$count"File
echo $HEAD
START15020300000 5File
There is a space coming before 5 which is not needed . How to ignore that . (4 Replies)
I have a data file d0 that looks like this:
$cat d0
server1 running -n-cv- 8G 3.1% 1435d 15h
server2 running -n---- 8G 39% 660d 22h
server3 running -n--v- 8G 2.5% 1173d 6h
server4 running -n---- 8G 1.1% 1048d 20h... (2 Replies)
Discussion started by: jake0391S
2 Replies
LEARN ABOUT LINUX
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)