This is why you put / (root) in a separate partition or logical volume.
You need to delete some old logs from /var/logs/
---------- Post updated at 12:52 PM ---------- Previous update was at 12:39 PM ----------
It also looks like there is a program, probably a log, that is taking up space but hasnt released the space on the drive.
since you have a 60GB drive for sda1 but I dont count 60GB being used on it, since /opt is on sdb1 and /mnt is on a remote pc.
Hi!
First thanks for your fast reply.
I already look at var/logs/ but i can find any file that use the space or any process that is fulling my disk. And you are right when you said that the / must be separeted from rest, but as i said i didn't mount the system, another person did'it. And i get the same conclusion, it's impossibel to have my boot disk full, because i have a few G ins disk....More help i aprecciate.
if it help
Thanks in advance
I use the following command dk -k and get the following output:
Filesystem kbytes used avail capacity Mounted on
/dev/dsk/c0t0d0s0 1587078 56546 1482920 4% /
/dev/dsk/c0t0d0s6 1984230 926199 998505 49% /usr
/proc 0 0 0 ... (1 Reply)
Hi, Anyone can help
My solaris 8 system has the following
/dev/null , /dev/tty and /dev/console
All permission are lrwxrwxrwx
Can this be change to a non-world write ??
any impact ?? (12 Replies)
Hi, I'm trying to mount a usb drive but the path /dev/sda1 does not show up under /dev when I plug in the usb device.
In fact I see no differences under /dev before and after I plugin my usb drive.
Any ideas why the system is not recognizing the usb drive and how to fix?
This is on a... (3 Replies)
So, we removed a LUN from the SAN and the system is refusing to remove the references to it in the /dev folder. I've done the following:
devfsadm -Cv
powermt -q
luxadm -e offline <drive path>
luxadm probe
All those commands failed to remove the path. The drive stills shows up as <drive... (13 Replies)
Hi,
How can i check that i am using RAW devices for storage in my AIX machine...
Also after adding a LUN from storage to a aix host, when i check /dev in the host, i can see both rhdisk and hdisk with same number
eg:
dcback1(root):/dev>ls -lrt | grep disk12
crw------- 1 root ... (4 Replies)
Hello AIXians,
I can't boot my AIX, it hangs and stops at the code error: 0518
After searching google, I knew the problem is due to problems in File Systems.
So the solution is booting from any bootable media, then run these commands in maintenance mode:
#fsck -y /dev/hd4
#fsck -y... (3 Replies)
Objective: To recreate the partitioning setup of /dev/sda on /dev/sdc
How would I parse the below information and initialize variables
(an array?) that can be used to build sgdisk commands in a script, regardless of the number of partitions?
Something along the lines of:
sgdisk -n... (12 Replies)
AIX Version 6.1 and 7.1.
I understand that when the OS initially creates the FS and inodes, its pretty strict, but not always tuned to a 1:1 ratio. I see the same thing when adding a whole disk LV to a separate device.
It seems that when we expand a filesystem the inodes don't get tuned... (5 Replies)
Hi,
Please suggest steps to change grub from /dev/sda to /dev/sdb, (1 Reply)
Discussion started by: manoj.solaris
1 Replies
LEARN ABOUT OSF1
llconvert
llconvert(8) System Manager's Manual llconvert(8)NAME
llconvert - Modify lastlog records from DIGITAL UNIX releases 4.0x and prior to new format
SYNOPSIS
/usr/lbin/llconvert [-vnrp?h] input_file [output_file]
OPTIONS
Restore new format to old format. Verbose. Display lines while converting. Do not preserve contents of input file. Formatted print only.
Do not convert. (May be used with the -r option). Display usage message.
DESCRIPTION
The llconvert command reads records from the lastlog file, such as /var/adm/lastlog, and converts the record format to the updated struct
lastlog format. If no output file is specified or if the output file path is identical to the input file path, llconvert makes a backup
copy of the original input file using the following algorithm: If filename.orig exists. Where n is a unique number.
The llconvert command attempts to detect an input file that is in the wrong format (for example, input file is already a new format file).
A warning message is issued in this case, but conversion continues.
RETURN VALUES
Success. An error occurred.
EXAMPLES
To convert an old format accounting file to the new format: llconvert /var/adm/lastlog.prev
Upon completion of this command, /var/adm/lastlog.prev will have been converted to the new format. The original /var/adm/last-
log.prev is renamed to:
/var/adm/lastlog.prev.orig To convert a lastlog file in new format to the old format: llconvert -r /var/adm/lastlog /var/adm/last-
log.old
FILES
Lastlog header file that defines the format for the lastlog file. The active lastlog file.
SEE ALSO
Commands: finger(1)llconvert(8)