This is why you put / (root) in a separate partition or logical volume.
You need to delete some old logs from /var/logs/
---------- Post updated at 12:52 PM ---------- Previous update was at 12:39 PM ----------
It also looks like there is a program, probably a log, that is taking up space but hasnt released the space on the drive.
since you have a 60GB drive for sda1 but I dont count 60GB being used on it, since /opt is on sdb1 and /mnt is on a remote pc.
Hi!
First thanks for your fast reply.
I already look at var/logs/ but i can find any file that use the space or any process that is fulling my disk. And you are right when you said that the / must be separeted from rest, but as i said i didn't mount the system, another person did'it. And i get the same conclusion, it's impossibel to have my boot disk full, because i have a few G ins disk....More help i aprecciate.
if it help
Thanks in advance
I use the following command dk -k and get the following output:
Filesystem kbytes used avail capacity Mounted on
/dev/dsk/c0t0d0s0 1587078 56546 1482920 4% /
/dev/dsk/c0t0d0s6 1984230 926199 998505 49% /usr
/proc 0 0 0 ... (1 Reply)
Hi, Anyone can help
My solaris 8 system has the following
/dev/null , /dev/tty and /dev/console
All permission are lrwxrwxrwx
Can this be change to a non-world write ??
any impact ?? (12 Replies)
Hi, I'm trying to mount a usb drive but the path /dev/sda1 does not show up under /dev when I plug in the usb device.
In fact I see no differences under /dev before and after I plugin my usb drive.
Any ideas why the system is not recognizing the usb drive and how to fix?
This is on a... (3 Replies)
So, we removed a LUN from the SAN and the system is refusing to remove the references to it in the /dev folder. I've done the following:
devfsadm -Cv
powermt -q
luxadm -e offline <drive path>
luxadm probe
All those commands failed to remove the path. The drive stills shows up as <drive... (13 Replies)
Hi,
How can i check that i am using RAW devices for storage in my AIX machine...
Also after adding a LUN from storage to a aix host, when i check /dev in the host, i can see both rhdisk and hdisk with same number
eg:
dcback1(root):/dev>ls -lrt | grep disk12
crw------- 1 root ... (4 Replies)
Hello AIXians,
I can't boot my AIX, it hangs and stops at the code error: 0518
After searching google, I knew the problem is due to problems in File Systems.
So the solution is booting from any bootable media, then run these commands in maintenance mode:
#fsck -y /dev/hd4
#fsck -y... (3 Replies)
Objective: To recreate the partitioning setup of /dev/sda on /dev/sdc
How would I parse the below information and initialize variables
(an array?) that can be used to build sgdisk commands in a script, regardless of the number of partitions?
Something along the lines of:
sgdisk -n... (12 Replies)
AIX Version 6.1 and 7.1.
I understand that when the OS initially creates the FS and inodes, its pretty strict, but not always tuned to a 1:1 ratio. I see the same thing when adding a whole disk LV to a separate device.
It seems that when we expand a filesystem the inodes don't get tuned... (5 Replies)
Hi,
Please suggest steps to change grub from /dev/sda to /dev/sdb, (1 Reply)
Discussion started by: manoj.solaris
1 Replies
LEARN ABOUT DEBIAN
xfs_estimate
xfs_estimate(8) System Manager's Manual xfs_estimate(8)NAME
xfs_estimate - estimate the space that an XFS filesystem will take
SYNOPSIS
xfs_estimate [ -h? ] [ -b blocksize ] [ -i logsize ]
[ -e logsize ] [ -v ] directory ...
DESCRIPTION
For each directory argument, xfs_estimate estimates the space that directory would take if it were copied to an XFS filesystem. xfs_esti-
mate does not cross mount points. The following definitions are used:
KB = *1024
MB = *1024*1024
GB = *1024*1024*1024
The xfs_estimate options are:
-b blocksize
Use blocksize instead of the default blocksize of 4096 bytes. The modifier k can be used after the number to indicate multiplica-
tion by 1024. For example,
xfs_estimate -b 64k /
requests an estimate of the space required by the directory / on an XFS filesystem using a blocksize of 64K (65536) bytes.
-v Display more information, formatted.
-h Display usage message.
-? Display usage message.
-i, -e logsize
Use logsize instead of the default log size of 1000 blocks. -i refers to an internal log, while -e refers to an external log. The
modifiers k or m can be used after the number to indicate multiplication by 1024 or 1048576, respectively.
For example,
xfs_estimate -i 1m /
requests an estimate of the space required by the directory / on an XFS filesystem using an internal log of 1 megabyte.
EXAMPLES
% xfs_estimate -e 10m /var/tmp
/var/tmp will take about 4.2 megabytes
with the external log using 2560 blocks or about 10.0 megabytes
% xfs_estimate -v -e 10m /var/tmp
directory bsize blocks megabytes logsize
/var/tmp 4096 792 4.0MB 10485760
% xfs_estimate -v /var/tmp
directory bsize blocks megabytes logsize
/var/tmp 4096 3352 14.0MB 10485760
% xfs_estimate /var/tmp
/var/tmp will take about 14.0 megabytes
xfs_estimate(8)