Hi,
I have list of directory paths in a variable and i want to delete those dirs and if dir does not exist then search that string and get the correct path from xml file after that delete the correct directory. i tried to use grep and it prints the entire line from the search.once i get the entire line how do i filter the path using awk special variables?
if $i has dir1/kernel if it exists delete otherwise grep "dir1/kernel" from input.xml file read the project name path and delete the folder"abc/dir1/kernel" and continue with loop.No space between name,=," so how do i use FS & what should be the search pattern in awk?
Hi Folks,
I have a file with all fields defined by byte position, but any field can be empty so I cannot print lines based on a search of specific columns. I need to print all lines of this file where the string of two characters at byte position 100-101 contains the number 27. Any ideas?
... (4 Replies)
My source is on each line
98.194.245.255 - - "GET /disp0201.php?poc=4060&roc=1&ps=R&ooc=13&mjv=6&mov=5&rel=5&bod=155&oxi=2&omj=5&ozn=1&dav=20&cd=&daz=&drc=&mo=&sid=&lang=EN&loc=JPN HTTP/1.1" 302 - "-" "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.0.3705; .NET CLR... (5 Replies)
awk experts,
I have a big file of 4000 columns with header. Would like to print the columns with string value of "Commands" in header. File has "," separator. This file is on ESX host with Bash.
Thanks,
Arv (21 Replies)
Hi Gurus
I am new to this forum.. I am using HP Unix OS.
I have one single string in input file as shown below
Abc123 | cde | fgh | ghik| lmno | Abc456 |one |two |three | four | Abc789 | five | Six | seven | eight | Abc098 | ........
I want to achive the result in a output file as shown... (3 Replies)
Hi
I have requirement to search string starting with specific characters and print whole matching word in that string.
example
mystr="ATTRIBUTE NAME="Event Name" VALUE="Execute""
I want to search by passing "NAME=" and result should be NAME="Event Name".
i am using below command but... (3 Replies)
Hi,
I have gone through may posts and dint find exact solution for my requirement.
I have file which consists below data and same file have lot of other data.
<MAPPING DESCRIPTION ='' ISVALID ='YES' NAME='m_TASK_UPDATE' OBJECTVERSION ='1'>
<MAPPING DESCRIPTION ='' ISVALID ='NO'... (11 Replies)
hi gurus,
I would like to be able to use awk to process 1 file as such:
abc 1 2 3 4 5 6 7 8 9 10
flags 1 2 4
flags 1 2 5
abc 2 3 4 5 6 7 8 9 10 11
flags 1 2 3
abc 4 5 6 7 8 9 6 7 78 89
flags 1 2 3
flags 1 2 4
flags 1 2 3 4
I would like to be able to print field 1 and 5 when the... (4 Replies)
Hi,
I have a sample file as shown below, I am looking for sed or any command which prints the complete word only from the input file.
Ex:
$ cat "sample.log"
I am searching for a word which is present in this file
We can do a pattern search using grep but I need to cut only the word which... (1 Reply)
In the below awk I am trying to print expName only if another tag planExecuted is true. In addition to the expName I am also printing planShortID. For some reason the word experiment gets printed so I remove it with sed. I have attached the complete index.html as well as included a sample of it... (1 Reply)
Discussion started by: cmccabe
1 Replies
LEARN ABOUT DEBIAN
git-rm
GIT-RM(1) Git Manual GIT-RM(1)NAME
git-rm - Remove files from the working tree and from the index
SYNOPSIS
git rm [-f | --force] [-n] [-r] [--cached] [--ignore-unmatch] [--quiet] [--] <file>...
DESCRIPTION
Remove files from the index, or from the working tree and the index. git rm will not remove a file from just your working directory. (There
is no option to remove a file only from the working tree and yet keep it in the index; use /bin/rm if you want to do that.) The files being
removed have to be identical to the tip of the branch, and no updates to their contents can be staged in the index, though that default
behavior can be overridden with the -f option. When --cached is given, the staged content has to match either the tip of the branch or the
file on disk, allowing the file to be removed from just the index.
OPTIONS
<file>...
Files to remove. Fileglobs (e.g. *.c) can be given to remove all matching files. If you want git to expand file glob characters, you
may need to shell-escape them. A leading directory name (e.g. dir to remove dir/file1 and dir/file2) can be given to remove all files
in the directory, and recursively all sub-directories, but this requires the -r option to be explicitly given.
-f, --force
Override the up-to-date check.
-n, --dry-run
Don't actually remove any file(s). Instead, just show if they exist in the index and would otherwise be removed by the command.
-r
Allow recursive removal when a leading directory name is given.
--
This option can be used to separate command-line options from the list of files, (useful when filenames might be mistaken for
command-line options).
--cached
Use this option to unstage and remove paths only from the index. Working tree files, whether modified or not, will be left alone.
--ignore-unmatch
Exit with a zero status even if no files matched.
-q, --quiet
git rm normally outputs one line (in the form of an rm command) for each file removed. This option suppresses that output.
DISCUSSION
The <file> list given to the command can be exact pathnames, file glob patterns, or leading directory names. The command removes only the
paths that are known to git. Giving the name of a file that you have not told git about does not remove that file.
File globbing matches across directory boundaries. Thus, given two directories d and d2, there is a difference between using git rm 'd*'
and git rm 'd/*', as the former will also remove all of directory d2.
REMOVING FILES THAT HAVE DISAPPEARED FROM THE FILESYSTEM
There is no option for git rm to remove from the index only the paths that have disappeared from the filesystem. However, depending on the
use case, there are several ways that can be done.
Using "git commit -a"
If you intend that your next commit should record all modifications of tracked files in the working tree and record all removals of files
that have been removed from the working tree with rm (as opposed to git rm), use git commit -a, as it will automatically notice and record
all removals. You can also have a similar effect without committing by using git add -u.
Using "git add -A"
When accepting a new code drop for a vendor branch, you probably want to record both the removal of paths and additions of new paths as
well as modifications of existing paths.
Typically you would first remove all tracked files from the working tree using this command:
git ls-files -z | xargs -0 rm -f
and then untar the new code in the working tree. Alternately you could rsync the changes into the working tree.
After that, the easiest way to record all removals, additions, and modifications in the working tree is:
git add -A
See git-add(1).
Other ways
If all you really want to do is to remove from the index the files that are no longer present in the working tree (perhaps because your
working tree is dirty so that you cannot use git commit -a), use the following command:
git diff --name-only --diff-filter=D -z | xargs -0 git rm --cached
EXAMPLES
git rm Documentation/*.txt
Removes all *.txt files from the index that are under the Documentation directory and any of its subdirectories.
Note that the asterisk * is quoted from the shell in this example; this lets git, and not the shell, expand the pathnames of files and
subdirectories under the Documentation/ directory.
git rm -f git-*.sh
Because this example lets the shell expand the asterisk (i.e. you are listing the files explicitly), it does not remove
subdir/git-foo.sh.
SEE ALSO git-add(1)GIT
Part of the git(1) suite
Git 1.7.10.4 11/24/2012 GIT-RM(1)