I am using SCO Unixware 2.1 & some PC clients are connected, suddenly one message appearslike :
UX:strintercept error: dropping message
this message starts coming repeatedly & agtre some time system hangs.I had to reset the system & now the problem is not there.Please suggest, why this is... (0 Replies)
I have an LPAR in a P5 machine which has been setup in an HACMP cluster. The person who set it up allocated the wrong network adapter (en) to the persistent network. For the life of me I cannot find where I can re-assign this adapter. Anyone able to help me as I am tearing my hair out and do not... (1 Reply)
hello
i've need to change network adapter on machine H80 aix 4.3.3 hacmp ( ent0 )
what i need to do after the new adapter installed on the machine?
thanks
best regards
ariec (1 Reply)
When I configure two VIO Servers, VIOS1 used to ping its gateway, after I configured second VIOS2, VIOS1 cannpt ping its gateway, when I run this command:
entstat -all ent#|grep -i priority
Priority: 5 Active: False
How to make Active to True? (1 Reply)
Hi All,
I am new here - this is my first post.
I have installed Solaris 10 5/09 on my Dell M6300. The install went well, but the Dell's onboard network card is the Broadcom BCM5756ME Gigabit Ethernet - and sadly no Solaris driver exists for it. The Solaris 10 install just jumped by the... (1 Reply)
I am haveing a problem with my VMware ESXi 4.1 server and a virtual SCO UnixWare 7.1.4 server that I need for a legacy application for my company. The problem seems simple but I can't find a solution. The UnixWare (UW) server is a clean install and patched as SCO recommends. I am able to telnet to... (1 Reply)
Hello Dears,
I have fujitsu tx300 S7 server with installed sco unixware 7.1.4,
Now the /etc is corrupted and the sco cannot boot.
There is no emergency disk or cd, I'm trying to fix this with reinstalling unixware again, but the problem now that when i try to install the HBA driver that i... (26 Replies)
hi .I've installed an operating system SCO in HP Z400 and network cards ZyXEL model FN312 with Chipset RTL8139D put it on .network card installed but do not display network card with command ifconfig -a in list and just show loopback.
show message :
dlpid:unable to open network adapter driver... (14 Replies)
Discussion started by: moein.mojtaba
14 Replies
LEARN ABOUT X11R4
dmxaddscreen
DMXAddScreen(3X)DMXAddScreen(3X)NAME
DMXAddScreen - attach a new back-end screen
SYNOPSIS
#include <X11/extensions/dmxext.h>
Bool DMXAddScreen(Display *dpy,
const char *displayName,
unsigned int mask,
DMXScreenAttributes *attr,
int *screen);
DESCRIPTION
DMXAddScreen() attaches a back-end screen to the Xdmx(1) server, in place of the previously detached back-end server specified by screen.
displayName is the name of the new back-end display, mask specifies the field in attr that are active, and screen returns the new Xdmx(1)
screen number for the attached screen.
The information stored in mask and attr is identical to that used by the DMXChangeScreenAttributes(3X) and DMXGetScreenAttribues(3X)
functions.
RETURN VALUE
DMXAddScreen() will return True if the screen was successfully attached, and False otherwise. False will be returned if the -addremove-
screens command line option was not specified on the Xdmx(1) command line, the input value of screen is out of range, screen is not cur-
rently detached, displayName cannot be opened, has unexpected visuals, or has characteristics that do not match the previously detached
screen.
DMXAddScreen() can generate BadLength, BadAlloc, and BadValue errors.
NOTES
Attributes that are not specified will default to 0. This may lead to unintended results.
Unlike other functions in the DMX(3X) API, this function uses screen for both input and output.
SEE ALSO DMXRemoveScreen(3X), DMXChangeScreenAttributes(3X), DMXGetScreenAttributes(3X), DMX(3X), Xdmx(1)X Version 11 libdmx 1.0.2 DMXAddScreen(3X)