Loading a RAID array after OS crash Post: 302438489

9 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Percent complete error while scanning RAID array during 5.0.6 load

Percent complete SCO 5.0.6 / No longer an issue

2. AIX

RAID level of array = false?

I created a RAID 5 array and when I list out the attributes of the "hdisk" it reports back raid_level = 5 but the RAID level of the array = false. What does this actually indicate about my array? I've never paid much attention to this until now since I have a disk reporting failure I want to make...

3. UNIX for Dummies Questions & Answers

Loading a comma Delimited file into an Array

Hello, I have been stuck on this aspect of loading a comma delimited file into an array. I thought i had the syntax right, but my commands are not working the way I want them to. Basically my cut command is splitting the file up by spaces and commas. I want the cut command to ignore white spaces....

4. UNIX for Advanced & Expert Users

Create RAID - Smart Array Tool - ML370

Hi guys, i must install an old old old ml370 server... I must create a RAID 5 with my 4 SCSI disk. I need a SmartStart disk for create it or a Floppy Disk called "Array configuration Tool". I don't find it on the hp website...:mad::mad::mad: Anyone have it?? Thanks in advance. Zio

5. Solaris

EFI Disk labels on 3510 raid array

Hi Peeps, Can anyone help me an EFI lablel on a 3510 raid array that I cannot get rid of, format -e and label just asks you if you want to label it. Want an SMI label writing to it. Anyone got any ideas on how to remove the EFI label? Thanks in advance Martin

6. Red Hat

missing raid array after reboot

Dear all , i ve configured raid 0 in redhat machine(VM ware), by following steps: #mdadm -C /dev/md0 -l 0 -n 2 /dev/sdb1 /dev/sdc1 #mkfs.ext3 /dev/md0 #mdadm --detail --scan --config=mdadm.conf >/etc/mdadm.conf then mounted the/dev/md0 device and also added a entry in fstab. how...

7. Shell Programming and Scripting

Problem with awk array when loading from shell variable

Hi, I have a problem with awk array when iam trying to use awk in solaris box as below..Iam unable to figure out the problem.. Need your help. is there any alternative to make it in arrays from variable values nawk 'BEGIN {SUBSEP=" "; split("101880|110045 101887|110045 101896|110045...

8. UNIX for Advanced & Expert Users

Revive RAID 0 Array From Buffalo Duo NAS

Thank you in advanced, I had a Buffalo DUO crap out on me that was setup as RAID 0. I dont belive it was the drives but rather the controller in the DUO unit. I bought another external HDD enclosure and was able to fireup the two older DUO drives in it and I think I resembled the RAID...

9. UNIX for Beginners Questions & Answers

Loading associative array from exported function

Hello. I have an export of an associative array build using declare -p SOME_ARRAY_NAME > SOME_FILE_NAME.txt. Producing some thing like declare -A SOME_ARRAY_NAME=( ="some_text" ="a_text" ......... ="another_text" ) in a text file. I have a stock of functions which are sourced from...

LEARN ABOUT NETBSD

mlxctl

MLXCTL(8)						    BSD System Manager's Manual 						 MLXCTL(8)

NAME

     mlxctl -- Mylex DAC960 family management utility

SYNOPSIS

     mlxctl [-f dev] [-v] [-a] status [drive] [...]
     mlxctl [-f dev] [-a] detach [drive] [...]
     mlxctl [-f dev] [-a] check [drive] [...]
     mlxctl [-f dev] rebuild channel:target
     mlxctl [-f dev] cstatus
     mlxctl [-f dev] rescan
     mlxctl [-f dev] config

DESCRIPTION

     The mlxctl utility performs status monitoring and management functions for Mylex DAC960 RAID controllers and attached devices.

     The following options are available:

     -a       Apply the action to all drives attached to the controller.

     -f dev   Specify the control device to use.  The default is /dev/mlx0.

     -v       Increased verbosity.

     The following commands are available:

     cstatus  Display the controller's current status.

     status   Display the status of the specified drives.  This command returns 0 if all drives tested are online, 1 if one or more drives are
	      critical and 2 if one or more are offline.

     rescan   Re-scan the logical drive table, and attach or detach devices from the system as necessary.

     detach   Detach the specified drives.  Drives must be unmounted and unopened for this command to succeed.

     check    Initiate a consistency check and repair pass on a drive that provides redundancy (e.g., RAID1 or RAID5).	This command returns imme-
	      diately.	The status command can be used to monitor the progress of the check.

     rebuild  Rebuild onto the specified physical drive.  Note that there can be only one running rebuild operation per controller at any given
	      time.  This command returns immediately.	The cstatus command can be used to monitor the progress of the rebuild.

     config   Write the current system drive configuration to stdout.

EXAMPLES

     Display the status of drive ld3 attached to the controller mlx1:

	   mlxctl -f /dev/mlx1 -v status ld3

SEE ALSO

     ld(4), mlx(4)

HISTORY

     The mlxctl command first appeared in NetBSD 1.5.3, and was based on the mlxcontrol utility found in FreeBSD.

BUGS

     Modifying drive configuration is not yet supported.

     Some commands do not work with older firmware revisions.

     Error log extraction is not yet supported.

BSD
								  April 10, 2000							       BSD