STEP 1
# Set variable
FILE=/tmp/mainfile
SEARCHFILE =/tmp/searchfile
# THIS IS THE MAIN FILE.
cat /tmp/mainfile
Interface Ethernet0/0 "outside", is up, line protocol is up
Hardware is i82546GB rev03, BW 100 Mbps
Full-Duplex(Full-duplex), 100 Mbps(100 Mbps)
MAC address... (6 Replies)
I am using the while-loop to read a file.
The file has lines with null-terminated strings (words, actually.)
What I have by that reading - just a first word up to '\0'!
I need to have whole string up to 'new line' - (LF, 10#10, 16#A)
What I am doing wrong?
#make file 'grb' with... (6 Replies)
I have the following text format in a file which lists the question first and then 5 choices
after that the explanantion and finally the answer.
1.The amount of time it takes for most of a worker’s occupational knowledge and skills to become
obsolete has been declining because of the... (2 Replies)
I'm kinda stuck on this one, I have 7 files with 30.000 lines/file like this
050 0.023 0.504336
050 0.024 0.529521
050 0.025 0.538908
050 0.026 0.537035
I want to find the mean line by line of the third column from the files named like this:
Stat-f-1.dat .... Stat-f-7.dat
Stat-s-1.dat... (8 Replies)
Hi,
I want to read a live log file line by line and considering those line which start from time stamp;
Below code I am using, which read line but throws an exception when comparing line that does not contain error code
tail -F /logs/COMMON-ERROR.log | while read myline; do... (2 Replies)
Hi ,
i have a file with data as below.This is same file. But actual file contains to many rows.
i want to search for a string "Field 039 00" and delete that line and previous 3 lines in that file.. Can some body suggested me how can i do using either sed or awk command ?
Field 004... (7 Replies)
Hello,
I need a program that read a file line by line and prints out lines 1, 2 & 3 after an empty line... An example of entries in the file would be:
SRVXPAPI001 ERRO JUN24 07:28:34 1775
REASON= 0000, PROCID= #E506 #1065: TPCIPPR, INDEX= 003F
... (8 Replies)
Hi All,
i want to write a shell script read below file line by line and want to exclude the lines which contains empty value for MOUNTPOINT field.
i am using centos 7 Operating system.
want to read below file.
# cat /tmp/d5
NAME="/dev/sda" TYPE="disk" SIZE="60G" OWNER="root"... (4 Replies)
Discussion started by: balu1234
4 Replies
LEARN ABOUT V7
vp
VP(4) Kernel Interfaces Manual VP(4)NAME
vp - Versatec printer-plotter
DESCRIPTION
Vp0 is the interface to a Versatec D1200A printer-plotter with a Versatec C-PDP11(DMA) controller. Ordinarily bytes written on it are
interpreted as ASCII characters and printed. As a printer, it writes 64 lines of 132 characters each on 11 by 8.5 inch paper. Only some
of the ASCII control characters are interpreted.
NL performs the usual new-line function, i.e. spaces up the paper and resets to the left margin. It is ignored however following a CR
which ends a non-empty line.
CR is ignored if the current line is empty but is otherwise like NL.
FF resets to the left margin and then to the top of the next page.
EOT resets to the left margin, advances 8 inches, and then performs a FF.
The ioctl(2) system call may be used to change the mode of the device. Only the first word of the 3-word argument structure is used. The
bits mean:
0400 Enter simultaneous print/plot mode.
0200 Enter plot mode.
0100 Enter print mode (default on open).
040 Send remote terminate.
020 Send remote form-feed.
010 Send remote EOT.
04 Send remote clear.
02 Send remote reset.
On open a reset, clear, and form-feed are performed automatically. Notice that the mode bits are not encoded, so that it is required that
exactly one be set.
In plot mode each byte is interpreted as 8 bits of which the high-order is plotted to the left; a `1' leaves a visible dot. A full line of
dots is produced by 264 bytes; lines are terminated only by count or by a remote terminate function. There are 200 dots per inch both ver-
tically and horizontally.
When simultaneous print-plot mode is entered exactly one line of characters, terminated by NL, CR, or the remote terminate function, should
be written. Then the device enters plot mode and at least 20 lines of plotting bytes should be sent. As the line of characters (which is
20 dots high) is printed, the plotting bytes overlay the characters. Notice that it is impossible to print characters on baselines that
differ by fewer than 20 dot-lines.
In print mode lines may be terminated either with an appropriate ASCII character or by using the remote terminate function.
FILES
/dev/vp0
SEE ALSO opr(1)VP(4)