One of my X4600 server had a power loss and rebooted and now its giving me a strange problem servers internal disk controller naming has changed by itself ... the after failsafe boot md.conf file shows following c3txdx but shows internal disk at c4txdx ... what could be the reason for this and how can i bring up the server.
Hi,
Whenever I reboot this server remotely by using the command 'shutdown -r now' or 'reboot'. The server does not return to normal multi-user mode. It boots in single user mode.
To bring back the server, someone is required to connect via console and fire 'init 3'.
Please suggest on what... (1 Reply)
Hi,
We are using SCO UNIX 7.1.3 and the server recently started rebooting by itself.
Do anyone know how can i create a dump or crash dump while the server rebooots?
Your quick help on this is really appreciated.
Regards,
Ravikumar R (1 Reply)
I need to configure the iLOM for x4600 server. before I can set the IP details and commit, I need to set network state should be enabled. However my firmware is already the latest and I need not upgrade. I am not able to set the /SP/network state to enable. pls assist. i BELIEVE the bug was fixed... (5 Replies)
Hi ,
Everytime after reboot when user tries to start vnc below error is thrown
$ vncserver :5
Couldn't start Xvnc; trying default font path.
Please set correct fontPath in the vncserver script.
Couldn't start Xvnc process.
_XSERVTransSocketCreateListener: failed to bind listener... (7 Replies)
Hi guys
I am troubleshooting a script that informs me when a system has rebooted.
The script is placed in /etc/rc3.d folder under root.
The script is as follows:
. /opt/scripts/function.sh
PATH=/usr/bin
EMAIL_ADD=<email address> ... (2 Replies)
Booting and checking BIOS there is no option to enable-disable hyperthreading.
I have 8 Dual-Core AMD Opteron(tm) Processor 8220 and I see 16 cores.
Enable hyperthreading I should have 32 cores.
I have red hat 5.4 installed.
Anyone know how can enable hypethreading ? I have last BIOS/Firmware... (2 Replies)
I'm trying to figure out what circumstances would cause an Open Solaris 11.2 host to switch itself from a static to a DHCP ip address upon reboot. This has only happened once but is a cause for some concern as this machine will be part of a web server pool.
Nothing has changed on the LAN that... (2 Replies)
Respected Members,
We encountered an issue during node reboot when eth1 and eth5 of bond1 were behaving unusual(both eth1 and eth5 were in unknown states and ifdown and ifup were used to rectify). Please find the messages and configuration files as below and please let me know for any other... (0 Replies)
Discussion started by: Mudit Bansal
0 Replies
LEARN ABOUT OSF1
reboot
reboot(2) System Calls Manual reboot(2)NAME
reboot - Reboots system or halts processor
SYNOPSIS
#include <sys/reboot.h>
void reboot( int howto );
PARAMETERS
Specifies a mask of options.
DESCRIPTION
The reboot() function restarts the system. The startup is automatic and brings up /vmunix in the normal, nonmaintenance mode. The calling
process must have superuser privilege to run this function successfully. However, a reboot is invoked automatically in the event of unre-
coverable system failures.
The following options, defined in the sys/reboot.h include file are passed to the new kernel or the new bootstrap and init programs. They
are supplied as values to the howto parameter. The default, causing the system to reboot in its usual fashion. Dump kernel memory before
rebooting; see the savecore command for more information. The processor is simply halted; no reboot takes place. The disks are not sync'd
before the processor is halted or rebooted. Normally, the disks are sync'd (see the sync() command) before the processor is halted or
rebooted. Because the disks are not sync'd with the RB_NOSYNC option, loss of data may result from using it.
When no options are given (that is, RB_AUTOBOOT is used), the system is rebooted from file vmunix in the root file system of unit 0 (zero)
of a disk chosen in a processor-specific way. (see the fsck command).
RETURN VALUES
If successful, this call does not return. Otherwise, a -1 is returned and errno is set to indicate the error.
ERRORS
If the reboot() function fails, errno may be set to the following value: The calling process does not have appropriate privilege.
RELATED INFORMATION
Commands: crashdc(8),
halt(8), init(8), reboot(8), savecore(8) delim off
reboot(2)