erm... if let say the Sunfire 490 will connect to a SAN switch only connect to the SAN DS4300, is it need extra drive to let the SAN switch recognize the server?
---------- Post updated 07-08-10 at 11:00 AM ---------- Previous update was 07-07-10 at 04:02 PM ----------
Hi all
i saw this in the IBM System Storage™ DS4000 Interoperability Matrix
but i not very understand with this statement, anyone have idea?
below is my Qlogic HBA model
Last edited by SmartAntz; 07-08-2010 at 12:06 AM..
Hi All,
I would like to share this incident that happened the other day.
I have a question with this, https://www.unix.com/aix/64921-create-new-vg-san-rename-fs.html
And I thought it's related to the above link but the problem was the ibm san 4300 cache battery was dead and I need to click... (2 Replies)
Hello everyone !
Im new on Ibm San DS4500.
Can you give me some tips to this, because I dont want to make a mistake.
I have some questions.
How can I know how much space get on the san, I cant find it.
How can add more space to a partition.
Do you have some tutorial about this. I... (0 Replies)
I have a question about SAN commands
I have almost 15Tb of disk on my san
but assigned and something else I have almost 11Tb
There is a command to know, what its my real total storage capacity and
another command to know how much I used .?
Thanks again in advance (0 Replies)
SUN DataBase Server (Sunfire v215)
Machine addresses
Server IP:10.8.104.53
Server Mgmt IP:10.8.104.51
Server hostname:memstestdb
OS passwords
root:*********
oracle:*********
ALOM (Admin/Management) Machine IP: 10.8.104.51
ALOM account and password:
admin:s@vi2005
(Note: at the... (2 Replies)
Hello,
I have AIX 6.1 with TL 4 and it is connected to IBM SAN STORAGE DS4700
After assigning some disks from SAN to AIX, I can see the disks in my AIX as
hdisk2 Available 05-00-02 MPIO Other DS4K Array Disk
hdisk3 Available 05-00-02 MPIO Other DS4K Array Disk
But it should... (0 Replies)
HI all,
I had recently change the Server storage from EMC to the IBM SAN.
but after the configuration, the IBM success to see the server HBA port and successfully assign a LUN for the server.
When i go to the server, and restarted it. i use the "format" command to check, but din see any... (1 Reply)
Hello,
I have IBM SAN STORAGE DS4100 and one of the cache battery for the controller is dead. Suddenly the performance has been degraded and access to SAN disks ( reading and writing ) became very slow ?
My query: Replacing the battery will take 6 days, so in the mean time what are the ways... (1 Reply)
Hello,
I have DS4000 IBM SAN Storage ( aka FastT Storage )
One of my disks has failed and I had a hot spare disk covering all the arrays. As the disk failed, immediately the hotspare disk took over the failed disk ( see the JPEG in the attachment )
My Question: How can I make the hotspare... (1 Reply)
Has anyone tried SAN to SAN mirroring on IBM DS SAN Storage.
DS5020 mentions Enhanced Remote Mirror to multi-LUN applications
I wonder if Oracle High availibility can be setup using Remote Mirror option of SAN ? (1 Reply)
Hi,
This is follow up to the post https://www.unix.com/aix/233361-san-disk-appearing-double-aix.html
When I connected Pseries Machine HBA Card ( Dual Port ) directly to the SAN Storage DS4300 , I was able to see Host Port Adapter WWN numbers , although I was getting this message... (2 Replies)
Discussion started by: filosophizer
2 Replies
LEARN ABOUT DEBIAN
liebert
LIEBERT(8) NUT Manual LIEBERT(8)NAME
liebert - Driver for Liebert contact-closure UPS equipment
NOTE
This man page only documents the hardware-specific features of the liebert driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE
This driver supports some Liebert UPS equipment with a contact-closure interface. This includes the UPStation GXT2 with their
contact-closure cable. The smart mode ("Multilink") cable is not supported by this driver.
EXTRA ARGUMENTS
This driver does not support any extra settings in the ups.conf(5).
BUGS
This driver does not yet support shutdowns by raising DTR. Be aware that shutdowns are not possible with the stock contact-closure cable.
You may have to build another cable with DTR connected through to the UPS for it to work.
There is no way for this driver to detect the hardware or cable. It will start up successfully even if no UPS is present. This is a
fundamental limitation of any contact-closure driver.
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 05/21/2012 LIEBERT(8)