Hi,
based on your experience what is the most common IPMP configuration on a two nodes cluster for HA failover / scalable services?
...active-active, active-standby with probe-based failure detection etc.
Thanks (3 Replies)
Hi,
I've a problem when try to detach nic e1000g1.
IPMP configuration:
# ifconfig -a
...cut...
e1000g1: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 7
inet 0.0.0.0 netmask 0
ether 0:c:29:67:16:ef
e1000g2: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4>... (3 Replies)
Hi all,
Currently i got a server which had two interface. I had study the <SystemAdministration Guide: IP> but still donno what is the correct step to configure it. Can u all help me on it? thanks
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index... (6 Replies)
Hi all,
I am new to HACMP. So sorry for the newie question. But I did search the forum and it seems that no one asks this before.
So if a 2-node cluster runs in active-active mode (and the same application), what is the benefit of using HACMP ?
If it runs in active-stanby, it is easy to... (9 Replies)
Dear All,
I have configured IPMP in one of my SUN machine which is having solros 9 version. I have updated all files like /etc/hosts,/etc/hostname.ce0 and /etc/hostname.ce1 and rebooted the server. But IP's are not mounted which i have given in /etc/hosts file.
Please find the below ifconfig... (6 Replies)
Hi,
I need to configure 4 ip address (same subnet and mask) in one ipmp group (two interfaces) in an active active formation (link based). Can some one provide the steps or a tutorial link.
Thanks (2 Replies)
Hi All, We are using solaris samba server for our company project to provide access to code to our development team.Recently our ICT has disabled wins service on Active directory due which user are not able to connect to samba share and they are getting error "No logon server available" as samba... (2 Replies)
#!/bin/bash
for digit in $(seq 1 10)
do
if ping -c1 -w2 192.168.1.$digit &> /dev/null
then
echo "192.168.1.$digit is UP"
else
echo "192.168.1.$digit is DOWN"
fi
done (3 Replies)
Hi,
I have two physical interface connected to solaris box.
1. e1000g1
2. e1000g2
I have added these interfaced under a same IPMP group "IPMP1"
After that I have configured a test address for e1000g1 like below
ifconfig e1000g1 addif <ip-address> netmask + broadcast + -failover... (1 Reply)
Discussion started by: praveensharma21
1 Replies
LEARN ABOUT SUSE
dpmsgettimeouts
DPMSGetTimeouts(3) X FUNCTIONS DPMSGetTimeouts(3)NAME
DPMSGetTimeouts - retrieves the timeout values used by the X server for DPMS timings
SYNOPSIS
cc [ flag ... ] file ... -lXext [ library ... ]
#include <X11/extensions/dpms.h>
Bool DPMSGetTimeouts
(
Display *display,
CARD16 *standby,
CARD16 *suspend,
CARD16 *off
);
ARGUMENTS
display
Specifies the connection to the X server
standby
Specifies the current standby timeout in seconds
suspend
Specifies the current suspend timeout in seconds
off Specifies the current off timeout in seconds
DESCRIPTION
The DPMSGetTimeouts function retrieves the timeout values used by the X server for DPMS timings.
The value standby is the amount of time of inactivity in seconds before standby mode is invoked. A value of zero indicates that this mode
has been disabled.
The value suspend is the amount of time of inactivity in seconds before the second level of power savings is invoked. A value of zero
indicates that this mode has been disabled.
The value off is the amount of time of inactivity in seconds before the third and final level of power savings is invoked. A value of zero
indicates that this mode has been disabled.
RETURN VALUES
TRUE The DPMSGetTimeouts function returns TRUE when values are returned.
FALSE The DPMSGetTimeouts function returns FALSE when no values returned.
SEE ALSO DPMSCapable(3), DPMSInfo(3), DPMSSetTimeouts(3)X Version 11 libXext 1.1.1 DPMSGetTimeouts(3)