Cut the file name Post: 302427807

8 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

Cut Command error cut: Bad range

Hi Can anyone what I am doing wrong while using cut command. for f in *.log do logfilename=$f Log "Log file Name: $logfilename" logfile1=`basename $logfilename .log` flength=${#logfile1} Log "file length $flength" from_length=$(($flength - 15)) Log "from...

2. Shell Programming and Scripting

Creating file from an existing file using CUT, is it the best option?

Dear All, I have a requirement in which i have to load a file placed in FTP location onto my database. The process i'll follow is as below: 1) Get the files using FTP. 2) Create the desired load files as i have to load only 19 fields out of the 104 available in the file. The fields i require...

3. Shell Programming and Scripting

cut lines from log file and save it another file

Dears, i want cut the lines from a log file. Example of the log file as follows.. May 27, 2011 5:54:51 PM com.huawei.ivas.utilities.sm.client.SMDeliverContrUtil isDeliverSM FINE: May 27, 2011 5:54:51 PM com.huawei.ivas.utilities.sm.client.SMUtil addSysUpMsgLog INFO: . The message content...

4. Shell Programming and Scripting

cut the variable from the line and use it to find the file and read the content of that file

Hi, I am working on one script..I am having files in the below format file 1 (each line is separated with : delimeter) SPLASH:SPLASH:SVN CIB/MCH:MCH:SVN Now I want from file 1 that most left part of the first line will store in...

5. Shell Programming and Scripting

Help required the cut the whole contents from one file and paste it into new file

Hi, First of all sincere apologies if I have posted in a wrong section ! Please correct me if I am wrong ! I am very new to UNIX scripting. Currently my problem is that I have a code file at the location /home/usr/workarea/GeneratedLogs.log :- Code :- (Feb 7, 571 7:07:29 AM),...

6. Shell Programming and Scripting

How to cut a pipe delimited file and paste it with another file to form a comma separated outputfile

Hello ppl I have a requirement to split (cut in unix) a file (A.txt) which is a pipe delimited file into A1.txt and A2.txt Now I have to join (paste in unix) this A2.txt with external file A3.txt to form output file A4.txt which should be CSV (comma separated file) so that third party can...

7. UNIX for Beginners Questions & Answers

Cut command: can't make it cut fields

I'm a complete beginner in UNIX (and not a computer science student either), just undergoing a tutoring course. Trying to replicate the instructions on my own I directed output of the ls listing command (lists all files of my home directory ) to My_dir.tsv file (see the screenshot) to make use of...

8. Shell Programming and Scripting

Using :<<cut / cut to comment out block of bash script

I am using : << cut / cut to comment out block of code. Works fine on few lines of script, then it gives me this cryptic error when I try to comment out about 80 lines. The "warning " is at last line of script. done < results 169 echo "END read all positioning parameters" 170...

LEARN ABOUT DEBIAN

vlan-interfaces

VLAN-INTERFACES(5)						   File formats 						VLAN-INTERFACES(5)

NAME

       /etc/network/interfaces (vlan) - vlan extensions for the interfaces(5) file format

DESCRIPTION

       /etc/network/interfaces	contains  network  interface  configuration  information  for  the  ifup(8)  and ifdown(8) commands.  This manpage
       describes the vlan extensions to the standard interfaces(5) file format.

       Primary extensions exist to make and destroy vlan interfaces, secondary extensions exist for ipv4 interface manipulation which  are  gener-
       ally needed when using (a lot of) vlans.

VLAN CREATION

       Vlan  interface	definitions  exist  of the vlan interface name, and an optional 'raw-device' parameter.  Vlan interfaces are numbered 1 to
       4095.  You have the option to have interface names zero-padded to 4 numbers, or just the plain digits without leading zero.  The  following
       example shows four ways to create a vlan with id 1 on interface eth0.  They all result in different names.

	iface eth0.1 inet static
	    address 192.168.1.1
	    netmask 255.255.255.0

	iface vlan1 inet static
	    vlan-raw-device eth0
	    address 192.168.1.1
	    netmask 255.255.255.0

	iface eth0.0001 inet static
	    address 192.168.1.1
	    netmask 255.255.255.0

	iface vlan0001 inet static
	    vlan-raw-device eth0
	    address 192.168.1.1
	    netmask 255.255.255.0

	# We don't have br support out of the box
	iface br0.2 inet static
	    vlan-raw-device br0
	    address 192.168.1.1
	    netmask 255.255.255.0

	# Aliases are ignored
	iface br0.2:1 inet static
	    address 192.168.1.1
	    netmask 255.255.255.255

EXTRA IFACE OPTIONS

       Usually someone who uses vlans also wants to do some other manipulations with the ip stack or interface.

       vlan-raw-device devicename
	      Indicates the device to create the vlan on.  This is ignored when the devicename is part of the vlan interface name.

       ip-proxy-arp 0|1
	      Turn proxy-arp off or on for this specific interface.  This also works on plain ethernet like devices.

       ip-rp-filter 0|1|2
	      Set the return path filter for this specific interface.  This also works on plain ethernet like devices.

       hw-mac-address mac-address
	      This sets the mac address of the interface before bringing it up.  This works on any device that allows setting the hardware address
	      with the ip command.

AUTHOR

       This manpage was adapted from interfaces(5) by Ard van Breemen <ard@kwaak.net>

SEE ALSO

       vconfig(8) interfaces(5)

vlan								 September 30 2007						VLAN-INTERFACES(5)