I'm having a problem establishing a console connection between a V240 and a V440. I verified and re verified the connection was in the correct places.
Commands:
Nothing happens after that. Other V440's work fine with the receiving the connection. Is there a setting within the OS that would prevent me from establishing a console connection?
hi all,
When I telnet my W2k machine to my Solaris8 machine, after typing my login name and password prompt, I get the following msg immediately.
====
Not on System Console.
Connection to host lost.
====
The 2 machines are connected on the same kingston workgroup hub. Can someone pls help? (3 Replies)
Does UNIX have a header file that provide the same functions as "conio.h" in Turbo C of DOS?
In Turbo C of DOS, "conio.h" provide some special console IO funtions, for example, change the text color, print out a text with a specific co-ordinate, etc ...
With these special functions, I can... (1 Reply)
I have a ultra 2 enterprise server without a video card. I tried to connect my PC to the sun box through console ports using hyperterminal with the standard setting(9600, 8, N, 1) but failed. The cable I used is a DB9 female--DB25 male null modem cable. Using the same setting and cable, I could... (1 Reply)
Dear gentlemen
I faced one problem when i made shutdown to my server AIX pserise/6000
the problem is the console (my console is outside not inside the server) corrupted during shutdown and restart so in this case I have to reinstall the linux in the console to allow me manage LPARS in the... (11 Replies)
kill -s KILL 0
-----------------------
-----------------------
i have used this command in a script...it is showing "killed" in output console.
i don't want that.plz help what to do.i have tried --kill -s KILL 0 >/dev/null
it is still showing "killed" in the output console...what to do? (1 Reply)
Hi Peeps,
Apologies if this is the wrong forum for this, if it is can someone point me in the direction of the right one?
Problem:
I've dropped an XVR-300 Graphics card into a T5220, configured it to output and input from the screen and keyboard instead of the virtual console. It... (3 Replies)
Hellow,
i bought a sun enterprise 420r. I would like to connect to the console for installation of a new operating system (solaris 10)
I made a connection from a usb --> com-port --> serial port of the server.
I configured my hyperterminal (9600 8n1) and when i connect to my server and... (2 Replies)
Hi everyone,
I am hoping anyone of you could help me in this weird problem we have in 1 of our Solaris 10 servers. Lately, we have been having some ftp problems in this server. Though it can ping any server within the network, it seems that it can only ftp to a select few. For most servers, the... (4 Replies)
My apologies if this is posted/answered elsewhere.
I have recently been tasked with getting 2 Sun V240's running Solaris 10 up and working. I should mention I come from the programming side of life with a small amount of networking on Windows 2003 servers.
They boot, no error lights, hd's... (6 Replies)
Hey All,
Trying to connect to the Power5 9133-55A serial console using a serial-to-usb converter (RS232). The other end is connected via null modem. Tried minicom, putty and other Linux utilities, no luck. The serial device shows up as /dev/ttyUSB0.
Tried 9600 8N1 XON/XOFF, no luck. ... (6 Replies)
Discussion started by: Devyn
6 Replies
LEARN ABOUT CENTOS
qmail-queue
qmail-queue(8) System Manager's Manual qmail-queue(8)NAME
qmail-queue - queue a mail message for delivery
SYNOPSIS
qmail-queue
DESCRIPTION
qmail-queue reads a mail message from descriptor 0. It then reads envelope information from descriptor 1. It places the message into the
outgoing queue for future delivery by qmail-send.
The envelope information is an envelope sender address followed by a list of envelope recipient addresses. The sender address is preceded
by the letter F and terminated by a 0 byte. Each recipient address is preceded by the letter T and terminated by a 0 byte. The list of
recipient addresses is terminated by an extra 0 byte. If qmail-queue sees end-of-file before the extra 0 byte, it aborts without placing
the message into the queue.
Every envelope recipient address should contain a username, an @ sign, and a fully qualified domain name.
qmail-queue always adds a Received line to the top of the message. Other than this, qmail-queue does not inspect the message and does not
enforce any restrictions on its contents. However, the recipients probably expect to see a proper header, as described in qmail-header(5).
Programs included with qmail which invoke qmail-queue will invoke the contents of $QMAILQUEUE instead, if that environment variable is set.
FILESYSTEM RESTRICTIONS
qmail-queue imposes two constraints on the queue structure: each mess subdirectory must be in the same filesystem as the pid directory; and
each todo subdirectory must be in the same filesystem as the intd directory.
EXIT CODES
qmail-queue does not print diagnostics. It exits 0 if it has successfully queued the message. It exits between 1 and 99 if it has failed
to queue the message.
All qmail-queue error codes between 11 and 40 indicate permanent errors:
11 Address too long.
31 Mail server permanently refuses to send the message to any recipients. (Not used by qmail-queue, but can be used by programs offering
the same interface.)
All other qmail-queue error codes indicate temporary errors:
51 Out of memory.
52 Timeout.
53 Write error; e.g., disk full.
54 Unable to read the message or envelope.
55 Unable to read a configuration file. (Not used by qmail-queue.)
56 Problem making a network connection from this host. (Not used by qmail-queue.)
61 Problem with the qmail home directory.
62 Problem with the queue directory.
63 Problem with queue/pid.
64 Problem with queue/mess.
65 Problem with queue/intd.
66 Problem with queue/todo.
71 Mail server temporarily refuses to send the message to any recipients. (Not used by qmail-queue.)
72 Connection to mail server timed out. (Not used by qmail-queue.)
73 Connection to mail server rejected. (Not used by qmail-queue.)
74 Connection to mail server succeeded, but communication failed. (Not used by qmail-queue.)
81 Internal bug; e.g., segmentation fault.
91 Envelope format error.
SEE ALSO addresses(5), envelopes(5), qmail-header(5), qmail-inject(8), qmail-qmqpc(8), qmail-send(8), qmail-smtpd(8)qmail-queue(8)