Sponsored Content
Full Discussion: Erase AIX rootvg system disk
Operating Systems AIX Erase AIX rootvg system disk Post 302425031 by ross.mather on Thursday 27th of May 2010 04:38:15 AM
Old 05-27-2010
Use AIX CD1 and boot to maintainence mode. Once you are here you can use diag to secure erase the disk.
 

9 More Discussions You Might Find Interesting

1. AIX

AIX System paramerter for Disk performance

Can I change any AIX System paramerter for speeding the data Disk performance? Currently it slows with writing operations. (1 Reply)
Discussion started by: gogogo
1 Replies

2. AIX

Erase hard disk data

How to erase/format hard disk data in RS6000 AIX PowerPC model 43 :confused: ? (8 Replies)
Discussion started by: kenloong
8 Replies

3. AIX

AIX 5.2/5.3 - rootvg on SAN disk - pros and cons

We are considering a DR strategy of booting AIX 5.3 and 5.3 logical partitions from EMC Symmetrix SAN disks, so that we can replicate via SRDF to a recovery site. Has anyone tried configuring AIX 5.x systems to boot from SAN disk? If so, can you provide any information on the pros and cons of... (6 Replies)
Discussion started by: jjgarrot
6 Replies

4. AIX

Erase hard disk

Hi ... How to erase bootable hard disk in Pseries... (3 Replies)
Discussion started by: sumathi.k
3 Replies

5. AIX

how to erase VIO server's rootvg?

how to erase VIO server's rootvg? I don't have CD can reinstall a new OS, can I go to maintenance to erase rootvg? (1 Reply)
Discussion started by: rainbow_bean
1 Replies

6. AIX

How to use dd command to erase the data in disk

how to use dd command to erase the data in disk, such as hdisk2? (9 Replies)
Discussion started by: rainbow_bean
9 Replies

7. AIX

vio server's rootvg disk migratepv

Hi I need to do the migratepv for the rootvg disks of the vio servers ? The current rootvg disks are on DMX3 storage and the new disks will be given from VMAX. Our setup is dual vio servers with multipathing to the vio clients. What is the command to do the migratepv for the vio rootvg disks... (5 Replies)
Discussion started by: newtoaixos
5 Replies

8. AIX

access data from a new disk was assigned another rootvg

Hello, I try to access to data after connect a new disk (hdisk1) to a AIX 7.1 system This new disk was assigned to a rootvg from another AIX 6.1 system. It seem not assigned to any vg but if I tried to assigned hdisk1 to rootvg i get : Data seem to be always here ... ouf ;-)... (4 Replies)
Discussion started by: Voran
4 Replies

9. AIX

AIX break rootvg mirror from system down

Hello, aix 5.2, mirrored rootvg on hdisk0 and hdisk1. hdisk0 is dead. I can boot to cd, into sms, into maintenance mode. I can fsck all the various partitions on hdisk1 (the hd4 hd2 hd3, etc...) all is fine. But without the hdisk0 part of the mirror I cannot get the system to boot. ystem hangs on... (6 Replies)
Discussion started by: sshapiro
6 Replies
installboot(1M) 														   installboot(1M)

NAME
installboot - install bootblocks in a disk partition SYNOPSIS
installboot bootblk raw-disk-device The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition. The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be found using the -i option of uname(1). The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead. bootblk The name of the bootblock code. raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read- able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive. Example 1: Installing UFS Boot Block To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use: example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk /dev/rdsk/c1t0d0s0 /usr/platform/platform-name/lib/fs/ufs directory where ufs boot objects reside. /platform/platform-name/ufsboot second level program to boot from a disk or CD See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5) WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device. 11 Apr 2005 installboot(1M)
All times are GMT -4. The time now is 03:27 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy