Solaris10 -> iscsi -> equiliogic lun Post: 302423195

10 More Discussions You Might Find Interesting

1. OS X (Apple)

iSCSI

I have configured iSCSI on server with linux running on it . On APPLE I have downloaded gloablSAN. When globalSAN is started ,it asks for target IP . I have given target IP . It has detected the disks . But when i use "disk utilities " , here the ISCSI disk are not displayed. except the...

2. Solaris

I have LUN ID, how to find disk relate to that LUN ID?

I have a list of LUN ID, my task is to find if disk has been added or not. How do I do that? I have been searching the forum and not able to find answer. thanks

3. AIX

Help growing iscsi lun

Hi, I have an iSCSI LUN of 200GB. I increased it to 250GB and when I try to increase the size of the vg, I'm getting an error that none of the volumes have increased in size. How can I get the OS to see the additional 50GB? ---------- Post updated at 03:22 PM ---------- Previous update...

4. Solaris

Set up iscsi LUN on solaris 9?

Hi, I need to set up iscsi LUN on Solaris 9. I've done it on Solaris 10 with iscsiadm. How do you do it on Solaris 9 though? Currently using Solaris 9 update 2. Your help is appreciated. Thanks, Sparcman

5. UNIX for Dummies Questions & Answers

How to change ethernet cable of iscsi initiator (iscsi client)?

how to change ethernet cable of iscsi initiator (iscsi client)

6. AIX

Any tips to grow iSCSI LUN

Hi, I have an iSCSI LUN attached to an AIX 5.3 box. It's initial size is 250GB, I just grew it on the SAN to 300GB, but AIX is not seeing the change. Right now I have some processes going and it's eating up the disk space. I need to grow this lun by atleast 30GB otherwise the process with bomb...

7. Solaris

Solaris10 sparc T5120 PANIC during iscsi command

Any idea why this Panic happened? Solaris10 Sparc T5120 panic during iscsi command, here is the panic log in the message : Mar 19 04:40:47 xavi-t5120c-solaris10u9-sparc genunix: /scsi_vhci/ssd@g00173800fdff0004 (ssd60) offline Mar 19 04:40:47 xavi-t5120c-solaris10u9-sparc genunix: ...

8. AIX

Netapp iscsi lun

Hi, I have aix 6.1 box. I want to configure iscsi luns from netapp storage. I tried in google but not getting proper solution for that. i m not getting the proper iqn name. Please share me the steps to complete this requirements. Thanks in advance.

9. Red Hat

DM multipath :iscsi lun shows by diff names on two server where its exported

Hi, I am trying to setup multipathing (using DM multipath) for a redhat cluster setup ...all setup is done but issue is : node 1 shows the shared iscsi lun as sdc node 2 shows the same as sdg (changes on reboots) Due to this (i guess) i get i/o error & i can not read files created by...

10. Solaris

Make an iSCSI LUN clone bootable

trying to do this for a DR situation. I've cloned an iSCSI LUN to another server. I've created an LDOM on it. set the LDOM to auto-boot=false and exported the LUN as a raw disk to the new LDOM. After starting the LDOM and telnetting to it. I can get to the OK prompt and see the disk but when I try...

LEARN ABOUT SUSE

tgt-setup-lun

tgt-setup-lun(8)					      System Manager's Manual						  tgt-setup-lun(8)

NAME

       tgt-setup-lun - creates a target, adds a device to the target and defines initiators that can connect to the target

SYNOPSIS

       tgt-setup-lun -d device -n target_name [initiator_IP1 initiator_IP2 ...] [-h]

DESCRIPTION

       Starts tgtd if necessary and creates a target according to the supplied target_name. The format of the target name is as follows:
       iqn.2001-04.com.<hostname>-<target_name> The target name must be unique.

       The  script then adds the requested device to the target. If specific IP addresses are defined, it adds them to the list of allowed initia-
       tors for that target. If no IP addresses is defined, it defines that the target accepts any initiator.

EXAMPLES

       Create a target that uses /dev/sdb1 and allows connections only from 192.168.10.81:
       tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81

       Create a target that uses /dev/sdb1 and allows connections only from 192.168.10.81 and 192.168.10.82:
       tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81 192.168.10.82

       Create a target that uses /dev/sdb1 and allows connections from any initiator:
       tgt-setup-lun -d /dev/sdb1 -n my_target

       Display help:
       tgt-setup-lun -h

AUTHOR

       Written by Erez Zilber

REPORTING BUGS

       Report bugs to <erezz@voltaire.com>.

COPYRIGHT

       Copyright (C) Voltaire Ltd. 2008.

																  tgt-setup-lun(8)