SDL_CreateRGBSurface(3) 					 SDL API Reference					   SDL_CreateRGBSurface(3)

NAME

       SDL_CreateRGBSurface - Create an empty SDL_Surface

SYNOPSIS

       #include "SDL.h"

       SDL_Surface *SDL_CreateRGBSurface(Uint32 flags, int width, int height, int depth, Uint32 Rmask, Uint32 Gmask, Uint32 Bmask, Uint32 Amask);

DESCRIPTION

       Allocate an empty surface (must be called after SDL_SetVideoMode)

       If  depth  is  8  bits  an  empty  palette  is  allocated  for the surface, otherwise a 'packed-pixel' SDL_PixelFormat is created using the
       [RGBA]mask's provided (see SDL_PixelFormat). The flags specifies the type of surface that should be created, it is an OR'd  combination	of
       the following possible values.

       SDL_SWSURFACE	   SDL	will create the surface in system memory. This improves the performance of pixel level access, however you may not
			   be able to take advantage of some types of hardware blitting.

       SDL_HWSURFACE	   SDL will attempt to create the surface in video memory. This will allow SDL to take	advantage  of  Video->Video  blits
			   (which are often accelerated).

       SDL_SRCCOLORKEY	   This  flag  turns on colourkeying for blits from this surface. If SDL_HWSURFACE is also specified and colourkeyed blits
			   are hardware-accelerated, then SDL will attempt to place the surface in video memory. Use  SDL_SetColorKey  to  set	or
			   clear this flag after surface creation.

       SDL_SRCALPHA	   This  flag  turns  on alpha-blending for blits from this surface. If SDL_HWSURFACE is also specified and alpha-blending
			   blits are hardware-accelerated, then the surface will be placed in video memory if possible. Use SDL_SetAlpha to set or
			   clear this flag after surface creation.

	      Note:

	      If  an  alpha-channel  is  specified (that is, if Amask is nonzero), then the SDL_SRCALPHA flag is automatically set. You may remove
	      this flag by calling SDL_SetAlpha after surface creation.

RETURN VALUE

       Returns the created surface, or NULL upon error.

EXAMPLE

	   /* Create a 32-bit surface with the bytes of each pixel in R,G,B,A order,
	      as expected by OpenGL for textures */
	   SDL_Surface *surface;
	   Uint32 rmask, gmask, bmask, amask;

	   /* SDL interprets each pixel as a 32-bit number, so our masks must depend
	      on the endianness (byte order) of the machine */
       #if SDL_BYTEORDER == SDL_BIG_ENDIAN
	   rmask = 0xff000000;
	   gmask = 0x00ff0000;
	   bmask = 0x0000ff00;
	   amask = 0x000000ff;
       #else
	   rmask = 0x000000ff;
	   gmask = 0x0000ff00;
	   bmask = 0x00ff0000;
	   amask = 0xff000000;
       #endif

	   surface = SDL_CreateRGBSurface(SDL_SWSURFACE, width, height, 32,
					  rmask, gmask, bmask, amask);
	   if(surface == NULL) {
	       fprintf(stderr, "CreateRGBSurface failed: %s
       ", SDL_GetError());
	       exit(1);
	   }

SEE ALSO

       SDL_CreateRGBSurfaceFrom, SDL_FreeSurface, SDL_SetVideoMode, SDL_LockSurface, SDL_PixelFormat, SDL_Surface SDL_SetAlpha SDL_SetColorKey

SDL
							      Tue 11 Sep 2001, 23:01					   SDL_CreateRGBSurface(3)