hello guys.
I just installed SCO 5.0.6 OpenServer it went all the way to the end of the installation and the first boot try it gave me this message.
not a directory
boot not found
cannot open
stage 1 boot failure: error loading hd (40)/boot (2 Replies)
Hello.
System is a HP Visualize C3600 running X11 and after a power failure machine will not boot (see error messages below)
From what I've read, this may be caused by a corrupted etc/inittab file. Solution suggested on other websites is to boot in single user mode and edit file inittab... (2 Replies)
Hi all
I used a dual boot operating system and it works fine for me. Now , i install a Ati radeon 9250 Agp card on my system and this results in boot failure of fedora 6. The graphics card is working fine with windows XP , i.e i have no compatibility issues.The system also refuses to boot when i... (2 Replies)
I installed solaris virtually and tried to format the partitions .. I dont know what went wrong, It got rebooted and hangs in the screen "No partitions" and after pressing Enter button it goes to "INT18 boot failure" and hangs there once again . Could any one of you suggest why this has happened... (3 Replies)
hi
SCO Unix 5.0.6 doesn't boot due to this problem:
not a directory
boot not found
cannot open
stage 1 boot failure: error loading hd (40)/boot
Knows someone howto solve it? (16 Replies)
I'm trying to run clusterKnoppix live cd from a couple machines but it only works from one computer. The other three, my toshiba laptop, emachine, and hp machine can't find the filesystem.. the live cd stops booting and gives me a error saying it couldn't find knoppix filesystem and then gives me a... (0 Replies)
Hi Guys,
I have a small problem with a v445 which I have been informed will only boot with the reconfigure option enabled.
It is attached to HP SAN storage using qla2300 FCA's with a Veritas encapsulated rootvoldg (No Laughing here please) when I try a reboot I get the following error.
... (5 Replies)
When I login to the live console of my server and go to the console, I am getting the below message
Processor is booting from the first available device.
To discontinue, press any key within 10 seconds.
10 seconds expired.
Proceeding...
Trying Primary Boot Path... (11 Replies)
Discussion started by: chacko193
11 Replies
LEARN ABOUT MINIX
reboot
REBOOT(2) System Calls Manual REBOOT(2)NAME
reboot - close down the system or reboot
SYNTAX
#define _MINIX_SOURCE 1
#include <unistd.h>
int reboot(int how, ...)
DESCRIPTION
Reboot() is used to close down the system. It allows several ways of shutting down depending on how:
reboot(RBT_HALT)
Halt the system and return to the monitor prompt.
reboot(RBT_REBOOT)
Reboot the system by letting the monitor execute the "boot" command.
reboot(RBT_PANIC)
Cause a system panic. This is not normally done from user mode, but by servers using the sys_abort() kernel call.
reboot(RBT_MONITOR, code, length)
Halt the system and let the monitor execute the given code of the given length. (code is of type char * and length of type size_t.)
reboot(RBT_RESET)
Reboot the system with a hardware reset.
Reboot() may only be executed by the super-user.
DIAGNOSTICS
If the call succeeds, it never returns. If something went wrong, the return value is -1 and an error is indicated by errno.
SEE ALSO shutdown(8), reboot(8), halt(8), sync(1).
NOTES
Minix can not return to the monitor if running in real mode, or if started from MS-DOS. This means that most of the reboot functions will
change to a reset.
AUTHOR
Edvard Tuinder (v892231@si.hhs.NL)
REBOOT(2)