04-18-2010
the TP port is the internal ethernet port. you have to use serial port A. if you've redirected the console to the RSC card you'll need to take some action from the service manual:
Quote:
If you need to redirect the console back to TTYA there are a number of options. OBP 4.15.x introduced Service mode , after shutting down the system turn the keyswitch to the diagnostics position and power on. The console will be redirected to the ttya serial port until the keyswitch is returned to normal and the system is reset.
or
Quote:
If access to Solaris and the RSC card is not available as a last resort the RSC card can be removed. This will temporarily reset the console output to the TTYA port. Once the OBP has been started, the parameters will need to be reset appropriately until the RSC card has been configured.
hth,
DN2
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
Has anyone had a message after attempting a telnet to an RSC server of:
"Console session already in use." I'm attempting to access this server to setup a user account, and I'm having some problems. Does anyone have an
idea or suggestion on how to proceed? (0 Replies)
Discussion started by: mr-synapse
0 Replies
2. Solaris
Hi all,
After the V890 server shutdown unexpectedly, it became unaccessible from RSC. There is one error message about it: rscadm: RSC firmware not responding
Do you have experienced this? Please help! (1 Reply)
Discussion started by: bamboonix
1 Replies
3. UNIX for Dummies Questions & Answers
Hi I have a SUN box that i am supporting Model 480r . The RS card that is attached to it is giving some problems . It is pinging but i am unable to telnet into it therefore having no remote TC console access ( the system is currently up )
Is there a way by which i can remotely check the... (1 Reply)
Discussion started by: Sam4u
1 Replies
4. Solaris
Hi All,
Please send the configuration for RSC in solaris.
Thanks and Regards, (3 Replies)
Discussion started by: lbreddy
3 Replies
5. Solaris
Dear All,
Can any body help me how to configure the RSC in solaris9.
Thanks and Regards, (1 Reply)
Discussion started by: lbreddy
1 Replies
6. Solaris
Hello Folks,
I am having trouble to login to rsc or serial console of V890.
The rsc2.2.3 has been configured with required parameters, resetrs and even rebooted. When serial port is connected to laptop, The hyper terminal does not get the console or POSt messages when the server is rebooting... (8 Replies)
Discussion started by: defflepord
8 Replies
7. Solaris
Hi All, ;)
I have configured rsc hosted on Sun-Fire-V490.
But I am not able to telnet this machine
Packages installed :
#pkginfo -l | grep SUNWrsc
PKGINST: SUNWrsc
PKGINST: SUNWrscd
PKGINST: SUNWrscj
I rebooted system but still I' not able to take rsc.
I am not... (3 Replies)
Discussion started by: tuxian
3 Replies
8. Solaris
Does anyone know where to get these on Oracle's support site or elsewhere? (7 Replies)
Discussion started by: LittleLebowski
7 Replies
9. Solaris
I have a disk failure in a V280, the support tech asked for explorer output and rsc information
sc>showsc
rsc>environment
rsc>loghistory
rsc>consolehistory
rsc>version -v
since RSC is not a secure connection, I am not comfortable with providing this information for a disk... (2 Replies)
Discussion started by: baumer11
2 Replies
10. Solaris
Dear all
Can you help me to reset RSC from Sun V490
Inside this machine the Operating System is broken..
please help guys
thanks (1 Reply)
Discussion started by: gema.utama
1 Replies
LEARN ABOUT DEBIAN
playwav
PLAYWAV(1) Voicetronix Telephony Tools PLAYWAV(1)
NAME
playwav - Play an audio file to a Voicetronix hardware port
SYNOPSIS
playwav [options] file
DESCRIPTION
The playwav utility sends audio data from a wav file to a port.
OPTIONS
The following options are available:
--card number
Explicitly select the card to test. Default is card 0.
--port number
Explicitly select the port to test. Default is port 0 of the specified card.
--playgain db
Set the playback gain.
--recgain db
Set the recording gain. Only useful with the --rec option.
--dial digits
Dial the given digits during playback.
--ring Wait for the line to ring before playing. Only useful for FXO ports.
--rec outfile
Record the incoming signal while playing. Useful for cut-through testing.
--loop Enable tx->rx loopback. Useful for echo testing, but not supported for all hardware types.
--hostecho
Enable the host based echo canceller.
SEE ALSO
recwav(1)
AUTHOR
Ron Lee, David Rowe, Voicetronix <support@voicetronix.com.au>
This manual page was written by Ron <ron@debian.org>, for the Debian project (but may be used by others).
VPB driver package Feb 4, 2007 PLAYWAV(1)