luxadm -e port shows one port not connected Post: 302405854

Sponsored Content

Operating Systems Solaris luxadm -e port shows one port not connected Post 302405854 by anwesh on Saturday 20th of March 2010 10:41:23 AM

03-20-2010

Registered User

luxadm -e port shows one port not connected

hi i have a sun machine which has one hba 2ports;
out of which one port says it is not connected

Code:

# luxadm -e port
/devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl                    CONNECTED
/devices/pci@1d,700000/SUNW,qlc@1,1/fp@0,0:devctl                  NOT CONNECTED

but both the hba ports are online and they are logging in to fiber channel switch

Code:

# fcinfo hba-port
HBA Port WWN: 210000e08bxxxxxx
        OS Device Name: /dev/cfg/c3
        Manufacturer: QLogic Corp.
        Model: 375-3108-xx
        Firmware Version: 3.3.117
        FCode/BIOS Version: ISP2312 Host Adapter Driver: 1.14.09 03/08/04
        Type: N-port
        State: online
        Supported Speeds: 1Gb 2Gb 
        Current Speed: 2Gb 
        Node WWN: 200000e08bxxxxxx
HBA Port WWN: 210100e08bxxxxx
        OS Device Name: /dev/cfg/c4
        Manufacturer: QLogic Corp.
        Model: 375-3108-xx
        Firmware Version: 3.3.117
        FCode/BIOS Version: ISP2312 Host Adapter Driver: 1.14.09 03/08/04
        Type: N-port
        State: online
        Supported Speeds: 1Gb 2Gb 
        Current Speed: 2Gb 
        Node WWN: 200100e08baxxxxxx

Last edited by DukeNuke2; 03-20-2010 at 12:25 PM..

anwesh

View Public Profile for anwesh

Find all posts by anwesh

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

getting info from microannex connected to serial port A

Hi, is there a way to get information of an annex device connected to port A ? i need to get the I.P address of the annex and the port it connected to on the annex. dori

2. UNIX for Advanced & Expert Users

Sunblade shows 2 MAC address on same port

Please, can someone tell me why my SunBlade would be showing 2 different but similar MAC addresses on the same port on the Switch? The switch shows all other Workstations with 1 MAC on each port, but the SunBlade is showing 2. Thanks in advance for any insight....

3. Shell Programming and Scripting

To get the ip of the devices connected to a specific port.

H, I want to know the ip of the devices connected to a specific port. Suppose 2 s/m's are connected to port 3092. I want to get the ip of those system's . how do i get it?

4. UNIX for Dummies Questions & Answers

Freeing up a serial port with a modem connected

I currently access a remote Unix server which has an external modem connected to one of it's serial ports (/dev/cua/b). At times, this server undergoes a hard reset and for some reason this disallows us from making use of the modem any longer. A hard reset of the modem always seems to fix the...

5. Solaris

Solaris 10. fcinfo hba-port shows adapter not Found

I understand that fcinfo hba-port should show information(WWN, HBA vendor, etc..) but my result show "No adapter found". If I used grep -i 'version' /var/adm/messages* then I see my installed HBA (QLogic FCode at 2.00.09).. I am wondering why and what I had failed to install? Thanks in advance....

6. UNIX for Advanced & Expert Users

How to list process connected to tcp port?

Hey guys, I need to kill the process that is currently connected to port 10540. I'm on HP-UX machine. Below is the result of my netstat. $ netstat -an |grep 10540 tcp 0 0 129.0.0.1.10540 *.* LISTEN We don't have lsof command, but we have fuser. ...

7. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

8. Solaris

SAN/Solaris: luxadm shows NOT CONNECTED

Hi, I have a question regarding HBA configuration. Here are the commands' output: # cfgadm -al | grep fc c1 fc-fabric connected unconfigured unknown c2 fc connected unconfigured unknown c5 ...

9. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

LEARN ABOUT CENTOS

rdma_xserver

RDMA_XSERVER(1) 						     librdmacm							   RDMA_XSERVER(1)

NAME

       rdma_xserver - RDMA CM communication server test program

SYNOPSIS

       rdma_xserver [-p port] [-c comm_type]

DESCRIPTION

       Uses the librdmacm to establish various forms of communication and exchange data.

OPTIONS

       -p port
	      Changes the port number that the server listens on.  By default the server listens on port 7471.

       -c communication type
	      Specifies  the  type  of	communication  established  with  the  client  program.  'r' results in using a reliable-connected QP (the
	      default).  'x' uses extended reliable-connected XRC QPs.

NOTES

       Basic usage is to start rdma_xserver, then connect to the server using the rdma_xclient program.

       Because this test maps RDMA resources to userspace, users must ensure that they have available system resources and permissions.   See  the
       libibverbs README file for additional details.

SEE ALSO

       rdma_cm(7), udaddy(1), mckey(1), rping(1), rdma_server(1), rdma_xclient(1)

librdmacm							    2011-06-15							   RDMA_XSERVER(1)