Hi,
is there a way to get information of an annex device connected to port A ? i need to get the I.P address of the annex and the port
it connected to on the annex.
dori (1 Reply)
Please, can someone tell me why my SunBlade would be showing 2 different but similar MAC addresses on the same port on the Switch? The switch shows all other Workstations with 1 MAC on each port, but the SunBlade is showing 2. Thanks in advance for any insight.... (1 Reply)
H,
I want to know the ip of the devices connected to a specific port.
Suppose 2 s/m's are connected to port 3092. I want to get the ip of those system's .
how do i get it? (1 Reply)
I currently access a remote Unix server which has an external modem connected to one of it's serial ports (/dev/cua/b). At times, this server undergoes a hard reset and for some reason this disallows us from making use of the modem any longer. A hard reset of the modem always seems to fix the... (0 Replies)
I understand that fcinfo hba-port should show information(WWN, HBA vendor, etc..) but my result show "No adapter found". If I used grep -i 'version' /var/adm/messages* then I see my installed HBA (QLogic FCode at 2.00.09).. I am wondering why and what I had failed to install?
Thanks in advance.... (23 Replies)
Hey guys,
I need to kill the process that is currently connected to port 10540. I'm on HP-UX machine.
Below is the result of my netstat.
$ netstat -an |grep 10540
tcp 0 0 129.0.0.1.10540 *.* LISTEN
We don't have lsof command, but we have fuser.
... (3 Replies)
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Hi, I have a question regarding HBA configuration. Here are the commands' output:
# cfgadm -al | grep fc
c1 fc-fabric connected unconfigured unknown
c2 fc connected unconfigured unknown
c5 ... (11 Replies)
please find the below o/p for your reference
bash-3.00# fcinfo hba-port
HBA Port WWN: 21000024ff295a34
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.03.02
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies
LEARN ABOUT SUNOS
hba_closeadapter
HBA_OpenAdapter(3HBAAPI) Common Fibre Channel HBA Information Library Functions HBA_OpenAdapter(3HBAAPI)NAME
HBA_OpenAdapter, HBA_OpenAdapterByWWN, HBA_CloseAdapter - open and close a specific adapter
SYNOPSIS
cc [ flag... ] file... -lHBAAPI [ library... ]
#include <hbaapi.h>
HBA_HANDLE HBA_OpenAdapter(char *adaptername);
HBA_STATUS HBA_OpenAdapterByWWN(HBA_HANDLE *handle, HBA_WWN wwn);
void HBA_CloseAdapter(HBA_HANDLE handle);
PARAMETERS
adaptername the name of the adapter to open, as returned by HBA_GetAdapterName(3HBAAPI)
handle
HBA_OpenAdapterByWWN()
a pointer to an HBA_HANDLE
HBA_CloseAdapter()
the open handle of the adapter to close, as returned by HBA_OpenAdapter(3HBAAPI)
wwn the WWN to match the Node WWN or Port WWN of the HBA to open
DESCRIPTION
The HBA_OpenAdapter() function opens the adapter specified by adaptername and returns a handle used for subsequent operations on the HBA.
The HBA_OpenAdapterByWWN() function opens a handle to the HBA whose Node or Port WWN matches the wwn argument.
The HBA_CloseAdapter() function closes the open handle.
RETURN VALUES
Upon successful completion, HBA_OpenAdapter() returns a valid HBA_HANDLE with a numeric value greater than 0. Otherwise, 0 is returned.
The HBA_OpenAdapterByWWN() function returns the following values:
HBA_STATUS_OK
The handle argument contains a valid HBA handle.
HBA_STATUS_ERROR_ILLEGAL_WWN
The wwn argument is not a valid port WWN on the specified HBA.
HBA_STATUS_ERROR_AMBIGUOUS_WWN
The WWN is matched to multiple adapters.
HBA_STATUS_ERROR
An error occurred while opening the adapter.
EXAMPLES
Example 1: Open an adapter.
The following example opens the specified adapter.
handle = HBA_OpenAdapter(adaptername);
if (handle == 0) {
fprintf(stderr, "Unable to open HBA %d with name "
""%s".
", hbaCount, adaptername);
continue;
}
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Interface Stability |Standard: FC-MI 1.92 (API |
| |version 1) |
+-----------------------------+-----------------------------+
| |Standard: FC-HBA Version 4 |
| |(API version 2) |
+-----------------------------+-----------------------------+
|MT-Level |Safe |
+-----------------------------+-----------------------------+
SEE ALSO HBA_GetAdapterName(3HBAAPI), HBA_OpenAdapter(3HBAAPI), libhbaapi(3LIB), attributes(5)
T11 FC-MI Specification
SunOS 5.10 1 Sep 2003 HBA_OpenAdapter(3HBAAPI)