Boot device: /pci@1f,700000/scsi@2/disk@0,0  File and args: -wars
Name of system file [/etc/system]:
SunOS Release 5.10 Version Generic_142900-03 64-bit
Copyright 1983-2009 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
root filesystem type [ufs]:
Enter physical name of root device
[/pci@1f,700000/scsi@2/disk@0,0:a]:
Hardware watchdog enabled
WARNING: consconfig: cannot find driver for screen device /pci@1d,700000/SUNW,XVR-100@1
Booting to milestone "milestone/single-user:default".
ERROR: svc:/system/filesystem/root:default failed to mount /usr  (see 'svcs -x' for details)
Failed to plumb IPv4 interface(s): bge0
Hostname: solaris
Requesting System Maintenance Mode
Console login service(s) cannot run
Root password for system maintenance (control-d to bypass):
single-user privilege assigned to /dev/console.
Entering System Maintenance Mode
Mar 20 06:36:34 su: 'su root' succeeded for root on /dev/console

*ident  "@(#)system     1.18    97/06/27 SMI" /* SVR4 1.5 */
*
* SYSTEM SPECIFICATION FILE
*
* moddir:
*
*       Set the search path for modules.  This has a format similar to the
*       csh path variable. If the module isn't found in the first directory
*       it tries the second and so on. The default is /kernel /usr/kernel
*
*       Example:
*               moddir: /kernel /usr/kernel /other/modules
 
* root device and root filesystem configuration:
*
*       The following may be used to override the defaults provided by
*       the boot program:
*
*       rootfs:         Set the filesystem type of the root.
*
*       rootdev:        Set the root device.  This should be a fully
*                       expanded physical pathname.  The default is the
*                       physical pathname of the device where the boot
*                       program resides.  The physical pathname is
*                       highly platform and configuration dependent.
*
*       Example:
*               rootfs:ufs
*               rootdev:/sbus@1,f8000000/esp@0,800000/sd@3,0:a
*
*       (Swap device configuration should be specified in /etc/vfstab.)
 
* exclude:
*
*       Modules appearing in the moddir path which are NOT to be loaded,
*       even if referenced. Note that `exclude' accepts either a module name,
*       or a filename which includes the directory.
*
*       Examples:
*       exclude: win
*               exclude: sys/shmsys
 
* forceload:
*
*       Cause these modules to be loaded at boot time, (just before mounting
*       the root filesystem) rather than at first reference. Note that
*       forceload expects a filename which includes the directory. Also
*       note that loading a module does not necessarily imply that it will
*       be installed.
*
*       Example:
*               forceload: drv/foo
 
* set:
*
*       Set an integer variable in the kernel or a module to a new value.
*       This facility should be used with caution.  See system(4).
*
*       Examples:
*
*       To set variables in 'unix':
*
*               set nautopush=32
*               set maxusers=40
*
*       To set a variable named 'debug' in the module named 'test_module'
*
*               set test_module:debug = 0x13
set c2audit:audit_load = 1