---------- Post updated at 06:52 PM ---------- Previous update was at 06:42 PM ----------
Thanks guys. Looks like it's working.... will keep an eye on it until it finishes.
Code:
bash-3.00# zpool status
pool: data
state: ONLINE
status: One or more devices is currently being resilvered. The pool will
continue to function, possibly in a degraded state.
action: Wait for the resilver to complete.
scrub: resilver in progress for 0h0m, 28.25% done, 0h2m to go
config:
NAME STATE READ WRITE CKSUM
data ONLINE 0 0 0
mirror ONLINE 0 0 0
c1t2d0 ONLINE 0 0 0
c1t3d0 ONLINE 0 0 0 1.93G resilvered
Hi Guys,
Need to add 2 disks into a JBOD array (3310).
Does anyone see anything wrong with my Procedure / Doco below?
1> Logon to system, check system logs for abnormal entries.
2> Make backups of related system files:
A>cp -p /etc/system /etc/system.backup.081505
B>cp -p /etc/vfstab... (3 Replies)
Hi there,
My task is to replace the two 73 G disks with two 143 G disks , which has vxvm 4.1 running on it. I would like to know whether the steps iam following are correct.
1. Break the sub-disks, plexes of the root mirror.
2. Remove the sub-disks,plexes of the root mirror.
3. Remove one of... (10 Replies)
hello everybody,
I have a system in Solaris 8 with SDS 4.2.1
I need to mirror the system disk which has the following characteristics :
* /dev/rdsk/c0t0d0s2 partition map
*
* Dimensions:
* 512 bytes/sector
* 133 sectors/track
* 27 tracks/cylinder
* 3591 sectors/cylinder... (3 Replies)
Hi all,
we have an existing system that was configured using just one of the (two) internal disks. I want to mirror the disk using SVM, but have realised there is no free slice for creating the metadb's. Is there a workaround I can use for this?
In the past we have always kept slice 7 free -... (8 Replies)
Need a procedure document to do "root disk mirroring in solaris volume manager for solaris 10". I hope some one will help me asap. I need to do it production environment.
Let me know if you need any deatils on this.
Thanks,
Rama (1 Reply)
I tried doing rootdisk mirroring in my local host , i added a new Ide disk in my system
and copied the prtvtoc from root disk to the newly added disk, and then when i tried to add database replicas on both the disks, it was added for boot disk but for the newly added disk i gave the error, which... (6 Replies)
I would like to perform root disk mirroring task. Can someone please help me out on this.
Thanks !!
Regards,
Rama (2 Replies)
Discussion started by: ramagore85
2 Replies
LEARN ABOUT OSF1
iostat
iostat(1) General Commands Manual iostat(1)NAME
iostat - Reports I/O statistics
SYNOPSIS
iostat [drive...] [interval] [count]
OPERANDS
Forces iostat to display specific drives. If drive is not specified (or the specified drive does not exist on the system or cluster,
iostat displays the first two drives (even if more than two disk drives are configured in the system). Causes iostat to report once each
interval seconds. The first report is for all time since the system was last booted, and each subsequent report is for the last interval
only.The value must not be 0. Specifies the number of reports. For example, iostat 1 10 would produce 10 reports at 1-second intervals.
You cannot specify count without interval because the first numeric argument to iostat is assumed to be interval.
DESCRIPTION
The iostat command reports the following information: For terminals (collectively), the number of characters read and written per second.
For each disk, the number of transfers per second and bytes transferred per second (in kilobytes). For the system, the percentage of time
the system has spent in user mode, in user mode running low priority (nice) processes, in system mode, and idling.
To compute this information, iostat counts data transfer completions, the number of words transferred for each disk, and the collective
number of input and output characters for terminals. Also, each sixtieth of a second, iostat examines the state of each disk and makes a
tally if the disk is active.
When you issue an iostat command on a cluster member, it displays statistics only for those disks that are local to the member and that
member's usage of those shared disks that it has mounted. It displays 0 for other disks in the cluster (those it doesn't have mounted),
regardless of whether they are on the shared bus or are local to some other member.
EXAMPLES
The output from this example displays cpu, terminal, and disk statistics for the first two disks on the system providing 5 reports at 1
second intervals:
# iostat 1 5
tty floppy1 dsk9 cpu
tin tout bps tps bps tps us ni sy id
0 3 0 0 0 0 1 0 4 95
4 58 0 0 0 0 1 0 2 97
1 53 0 0 0 0 0 0 2 98
5 59 0 0 0 0 1 0 1 98
6 60 0 0 0 0 1 0 2 97
The second example specifies device names in the command:
# iostat dsk2 dsk3 cdrom2
tty dsk2 cdrom2 dsk3 cpu
tin tout bps tps bps tps bps tps us ni sy id
0 13 11 5 5 2 2427 1213 0 1 1 98
SEE ALSO Commands:vmstat(1)iostat(1)
03-18-2010
Thanks guys. Looks like it's working.... will keep an eye on it until it finishes.