03-03-2010
You mean you want to move a usb file which is on the /dev/disk/by-path/ to some where ?
Please correct me if im wrong
10 More Discussions You Might Find Interesting
1. SuSE
Sir,
I using the following commands in a file (part of a bigger script):
#!/bin/bash
cd /opt/oracle/bin
ls -lt | tail -1 | awk '{print $6}' >> /tmp/ramb.out
If I run this from the command prompt the result is:
2007-05-16
if I run it as a cron job then... (5 Replies)
Discussion started by: rajranibl
5 Replies
2. Shell Programming and Scripting
Hi ,
I have a piece of code ...wherein I need to assign the following ...
1) A command line argument to a variable
e.g origCount=ARGV
2) A unix command to a variable
e.g result=`wc -l testFile.txt`
in my awk shell script
When I do this :
print "origCount" origCount --> I get the... (0 Replies)
Discussion started by: sweta_doshi
0 Replies
3. AIX
AIX:Command to get netaddress/subnet address command in IPv4/IP6
Can anybody help us with a command to retrieve netaddress/subnet address command in IPv4/IP6 on aix machine.
net/subnet address is in the format 172.16.212.0(signifies all 255 machines in an IPv4 network) (2 Replies)
Discussion started by: rookie8278
2 Replies
4. Shell Programming and Scripting
Hi everyone,
when executing this command in unix:
echo "WM7 Fatal Alerts:", $(cat query1.txt) > a.csvIt works fine, but running this command in a shell script gives an error saying that there's a syntax error.
here is content of my script:
tdbsrvr$ vi hc.sh
"hc.sh" 22 lines, 509... (4 Replies)
Discussion started by: 4dirk1
4 Replies
5. UNIX for Advanced & Expert Users
Hi,
Well my title isn't very clear I think. So to understand my goal:
I have a script "test1"
#!/bin/bash
xvkbd -text blabla
with xbindkeys, I bind F5 key in order it runs my test1 script
So when I press F5, test1 runs.
I'm under Emacs/Vi and I press F5 in order to have "blabla" be... (0 Replies)
Discussion started by: xib.be
0 Replies
6. UNIX for Dummies Questions & Answers
HI Guys,
I hope you are well. I am trying to write a script that gets executed every time i open a shell (cshell). I have two questions about that
1) I need to enter these commands
$ echo $DISPLAY
$ setenv $DISPLAY output_of_echo_$display_command
How can i write a... (2 Replies)
Discussion started by: kaaliakahn
2 Replies
7. Shell Programming and Scripting
I am working with a sh script on a solaris 9 zone (sol 10 host) that grabs information to build the configuration command line. the variables Build64, SSLopt, CONFIGopt, and CC are populated in the script. the script includes
CC=`which gcc`
CONFIGopt=' --prefix=/ --exec-prefix=/usr... (8 Replies)
Discussion started by: oly_r
8 Replies
8. Shell Programming and Scripting
below is the output xml string from some other command and i will be parsing it using awk
cat /tmp/alerts.xml
<Alert id="10102" name="APP-DS-ds_ha-140018-componentFailure-S" alertDefinitionId="13982" resourceId="11427" ctime="1359453507621" fixed="false" reason="If Event/Log Level(ANY) and... (2 Replies)
Discussion started by: vivek d r
2 Replies
9. AIX
exec(): 0509-036 Cannot load program /usr/opt/freeware/bin/rpm because of the following errors:
0509-022 Cannot load module /opt/freeware/lib/libintl.a(libintl.so.1).
0509-150 Dependent module /opt/freeware/lib/libiconv.a(shr4.o) could not be loaded.
0509-152 Member... (4 Replies)
Discussion started by: Ohmkar
4 Replies
10. UNIX for Beginners Questions & Answers
Hello Forum,
I'm making very good progress on my report thanks to the very helpful people on this forum. I've been able to successfully create my report for my Red Hat servers. But I do have a few ubuntu servers in the mix and I'd like to capture some data from them when an ssh connection is... (8 Replies)
Discussion started by: greavette
8 Replies
LEARN ABOUT DEBIAN
fpga_load
FPGA_LOAD(8) FPGA_LOAD(8)
NAME
fpga_load - Xorcom Astribank (xpp) firmware tool
SYNOPSIS
fpga_load [-g] [-r] [-v] -D {/proc/bus/usb|/dev/bus/usb}/BUS/DEV
fpga_load [-g] [-v] -D {/proc/bus/usb|/dev/bus/usb}/BUS/DEV -I firmware.hex [-b dump.bin] [-i]
fpga_load -h
DESCRIPTION
fpga_load loads the FPGA firmware to the Xorcom Astribank device. The syntax resembles that of fxload(8).
OPTIONS
-b dump.bin
Before writing firmware, bump the processed binary file to dump.bin.
-D DEVICE
Required. The device to read from/write to. On modern UDEV-based system this is usually /dev/bus/usb/bus_num/device_num, where
bus_num and device_num are the first two numbers in the output of lsusb(8). On older systems that use usbfs, it is usually
/proc/bus/usb/bus_num/device_num.
-r
Reset the Astribank and renumerate its USB connection to power on product ID.
-g
Dump all eeprom data to standard output.
-I fireware_file
The firmware file to write to the device.
-i
Show information about the firmware file (valid only with -I option). Example:
./FPGA_1151.hex: Version=3297 Checksum=58270
In particular, the calculated checksum should match the output of sum(1) on the binary firmware file generated by the -b option.
-v
Increase verbosity. May be used multiple times.
-h
Displays usage message.
SEE ALSO
fxload(8), lsusb(8)
AUTHOR
This manual page was written by Tzafrir Cohen <tzafrir.cohen@xorcom.com> . Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU General Public License, Version 2 any later version published by the Free Software Foundation.
On Debian systems, the complete text of the GNU General Public License can be found in /usr/share/common-licenses/GPL.
16 April 2006 FPGA_LOAD(8)