Can not Ping Gateway Post: 302400257

10 More Discussions You Might Find Interesting

1. IP Networking

Unable to ping the gateway IP itself

We are unable to bring one of our linux boxes into the network once it was restarted. But once we stop and start the network service. We are able to ping the gateway and get into network. After a minute or two we get the following reponse for the ping command 64 bytes from 124.168.215.40:...

2. IP Networking

Multihomed can not ping gateway

Hello this is my first post at this forum. Apologize for my lack of network understanding but Im posting to learn. I have a problem reaching default gateway 10.18.110.1 If I use my laptop I can ping 10.18.110.1 but with our red hat multihomed server the gateway does not respond to ping. cat...

3. Solaris

ping -s to default gateway very slow

I was install new solaris10 on m4000 model after that i "ping -s" to default gateway but it's take longtime (2 Min) to reply and if i use "ping" only it's reply to fase(2 sec). any body who can tell me about my problem and how to fix it please. i'm try to fix several days.

4. Red Hat

Cannot ping gateway

I know the subject line is very similar to: destination host unreachable but the problem with my machine appears to be somewhat different from that thread. apologies if I missed something from there. We recently moved a machine physically and from one subnet to another . I used...

5. AIX

IBM Server doesn't ping gateway unless you put a static route

Just want to know if someone has a clue about what could be happening here: I have an AIX box with four NICs in Ether channel connected to a Cisco Switch. When I try to ping the default gateway, sometimes it works, but sometimes it doesn't work unless it has a defined static route. Thanks...

6. UNIX for Dummies Questions & Answers

Cannot ping default gateway

I have NCR MP-RAS unix. I have been trying for several months to get our network working since we had never used it before. I have setup all routes that I can think of. I know it has something to do with the routing table, because out of sheer luck I was able to get it working, and than like a...

7. AIX

Cant ping default gateway aix 53 07 new install

I just reinstalled a fresh install of 5300 07 on an old 44p model 170, after installing I set an IP Address on en2 and I tried to the ping default gateway, no response. I tried a startsrc -g tcpip ... and then I can ping the default gateway. I broke the ping and tried again to ping. I cannot...

8. Red Hat

Can not ping default gateway

Hi, Here is the issue: There are 2 identical systems in the same subnet here. They can ping and ssh each other. One can ping the default gateway and one can not with error '... icmp_seq Destination Host Unreachable'. I can't find any difference between the two systems in terms of network...

9. AIX

Networking Issue (Cant Ping the gateway)

Hi, I installed AIX 7.1 on a blade though (hmc with vio). I can ping the IP address, but not the gateway. Is there anything that I should configure? Is there anything that I have to check with vio setting or Am I missing any configuration? Please let me know further. Thank you

10. UNIX for Advanced & Expert Users

Unable to ping default gateway

I have setup a Linux machine on my server but for some reason Im unable to reach my default gateway. This is causing me to not communicate with the outside world (unable to connect to CentOS repos) # ifconfig enp0s3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet...

LEARN ABOUT SUNOS

gnome-network-preferences

gnome-network-preferences(1)					   User Commands				      gnome-network-preferences(1)

NAME

       gnome-network-preferences - configure network proxy

SYNOPSIS

       gnome-network-preferences [gnome-std-options]

DESCRIPTION

       The  Network  Proxy preference tool enables you to configure how your system connects to networks. You can configure the desktop to connect
       to a proxy server, and specify the details of the proxy server. A proxy server is a server that intercepts requests to another server,  and
       fulfills the request itself, if it can. You can enter the Domain Name Service (DNS) name or the Internet Protocol (IP) address of the proxy
       server.

OPTIONS

       The following options are supported:

       gnome-std-optionStandard options available for use with most GNOME applications. See gnome-std-options(5).

EXAMPLES

       Example 1: Launching the Network Proxy preference tool

       example% gnome-network-preferences

EXIT STATUS

       The following exit values are returned:

       0	Application exited successfully

       >0	Application exited with failure

FILES

       The following files are used by this application:

       /usr/bin/gnome-network-pExecutable for Network Proxy preferences tool

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+------------------------------+
       |      ATTRIBUTE TYPE	     |	     ATTRIBUTE VALUE	    |
       +-----------------------------+------------------------------+
       |Availability		     |SUNWgnome-desktop-preferences |
       +-----------------------------+------------------------------+
       |Interface stability	     |External			    |
       +-----------------------------+------------------------------+

SEE ALSO

       Preference Tools Manual

       Latest version of the GNOME Desktop User Guide for your platform.

       gnome-std-options(5)

NOTES

       Written by Glynn Foster, Sun Microsystems  Inc., 2003.

SunOS 5.10							    2 Oct 2003					      gnome-network-preferences(1)

10 More Discussions You Might Find Interesting

1. IP Networking

Unable to ping the gateway IP itself

Discussion started by: chrisanto_2000

2. IP Networking

Multihomed can not ping gateway

Discussion started by: vettec3

3. Solaris

ping -s to default gateway very slow

Discussion started by: cesmk

4. Red Hat

Cannot ping gateway

Discussion started by: mirage