Hi all, hope you are having a nice day, its nice and warm today in Canberra Australia.
iostat -e / -E reports soft and hard errors. Any idea what these are exactly? All I hear are I/O's failing and needing to retry, but no cause as to why they fail.
My SUN guru tells me its our EMC SAN... (1 Reply)
Hi all,
i have run iostat -em, and get below result. Can i know what is this output meaning, and how to fix that problem.
iostat -em
---- errors ---
device s/w h/w trn tot
sd7 0 1 0 1
sd8 1 1 0 2
sd9 0 1 0 1
sd10 0 ... (2 Replies)
Here is my file name countries
USSR 8650 262 Asia
Canada 3852 24 North America
China 3692 866 Asia
USA 3615 219 North America
Brazil 3286 116 South America
India 1269 637 Asia
Argentina 1072 ... (8 Replies)
So I use Cacti for monitoring IO statistics on my servers, now originally I couldnt monitor Multipath deviced servers as they have alot of /dev/sdxx and /dev/emcpowerxx, I have devised a method of trimming them down to just the actual devices but the issue is the output looks like so.
# iostat... (0 Replies)
Friends,
.
On linux i have to run iostat command and in each iteration have to print the greatest value in each column.
e.g
iostat -dt -kx 2 2 | awk ' !/sd/ &&!/%util/ && !/Time/ && !/Linux/ {print $12}'
4.38
0.00
0.00
0.00
What i would like to print is only the... (3 Replies)
Hi Guys,
Please help me out in my situation of writing a shell script
Exampl:I have a output like
asnapply 1 2 3 apply_server=1 apply_schema=ASN
asnapply 1 2 3 apply_server=2 apply_schema=ASN
Now i need output like
asnacmd applysever=1 applyschema=ASN stop
asnacmd applysever=2... (16 Replies)
Hello,
I have a file with two fields. The first field repeats itself for quite a while but the second field changes. What I want to do is to go through the first column until its value changes (and while it doesn't, verify that the second field is in a sequence from 0-15).
Example input:
... (13 Replies)
Hi Guys,
I've been having some arguments with my colleagues about one thing. Always my thought was that as as far as disk performance is concern by looking at the output of the iostat command (AIX) you would be able to identify if you have a hot disk and then by moving some files out that disk... (3 Replies)
Noticed that asvc_t values in iostat command outputs are mostly more than 100 in our previous iostat analysis.
Also found the following detail from an alternate site IO Bottleneck - Disk performance issue - UnixArena
----
1. asvc_t average service time of active transactions, in... (2 Replies)
Discussion started by: saraperu
2 Replies
LEARN ABOUT CENTOS
wdctl
WDCTL(8) System Administration WDCTL(8)NAME
wdctl - show hardware watchdog status
SYNOPSIS
wdctl [options] [device...]
DESCRIPTION
Show hardware watchdog status. The default device is /dev/watchdog. If more than one device is specified then the output is separated by
one blank line.
Note that number of supported watchdog features is hardware specific.
OPTIONS -f, --flags list
Print selected flags only.
-F, --noflags
Do not print information about flags.
-n, --noheadings
Do not print a header line for flags table.
-I, --noident
Do not print watchdog identity information.
-T, --notimeouts
Do not print watchdog timeouts.
-s, --settimeout seconds
Set the watchdog timeout in seconds.
-o, --output list
Define the output columns to use in table of watchdog flags. If no output arrangement is specified, then a default set is used.
Use --help to get list of all supported columns.
-O, --oneline
Print all wanted information on one line in key="value" output format.
-V, --version
Output version information and exit.
-r, --raw
Use the raw output format.
-x, --flags-only
Same as -I -T.
-h, --help
Print a help text and exit.
AUTHORS
Karel Zak <kzak@redhat.com>
Lennart Poettering <lennart@poettering.net>
AVAILABILITY
The wdctl command is part of the util-linux package and is available from Linux Kernel Archive <ftp://ftp.kernel.org/pub/linux/utils/util-
linux/>.
util-linux June 2012 WDCTL(8)