Virtual interface on AIX Post: 302398991

10 More Discussions You Might Find Interesting

1. HP-UX

HP-UX - how to create virtual interface

OS - HP-UX B.10.20 A 9000/777 Anyone know how to set up a virtual interface on HP-UX? I've looked quickly through docs.hp.com and searched this site. No luck. And my HP Guru is sleeping today.

2. HP-UX

Adding virtual Interface on HP UX

Hello all, I want to add a new virtual interface on HP-UX B.11.11 U 9000/800 box. I know that ifconfig can be used to add the Virtual interface. BUt i do not know the exact syntax. it some times gives plumb error if i try to add # ifconfig vif0 10.1.10.1 up plumb error: No such file...

3. HP-UX

Traceroute on virtual interface

Hello all, I have configured a virtual interface using ifconfig on HP UX 11.11. When i try to do traceroute with -i option i get * * * from traceroute. i use $traceroute -i lan0:1 my-gateway traceroute to my-gateway (15.70.180.1), 30 hops max, 40 byte packets 1 * * * 2 * * * 30 * *...

4. IP Networking

Solaris Virtual Interface Problem in DHCP

Hi all, I am experiencing a problem with dhcp broadcast packages. these broadcast packages are seen on bge1 and bge1:1 interfaces but somehow they are not seen at bge771001 interface which is second virtual interface on the bge1 interface. I have a server on which I configured it as working...

5. Shell Programming and Scripting

virtual interface

How would i create virtual interface in linux to configure more than one IP address for a physical interface? any help wll be appreciated. https://www.unix.com/images/misc/progress.gif

6. IP Networking

assign mac address for virtual interface eth1:0

Hi , by default the physical interface (eth1) and virtual interface eth1:0 will be having same mac address, is there any way we can assign separate mac addresses for both the interfaces. would some one help me out in this. Thanks Gopi

7. UNIX for Dummies Questions & Answers

Creating a virtual Interface to recieve snmp traps

All, I have a question regarding setting up a virtual interface to recieve snmp traps from network devices. My Solaris 10 server is running the HPOV-NNMi application. The network devices in our environment (many thousands) are all pre-configured to send their snmp traps to a specific IP...

8. IP Networking

Splitting eth0 traffic into two virtual interface

Hello everybody, I have been reading many posts about this topic but I have no figure out how to solve it. I need to split the traffic incoming on eth0 on two other interfaces (for instance one receiving on port 80 and the others on the other interface). I cannot understand how to do that....

9. IP Networking

How to route all incoming packets from one virtual interface?

Hello, I'm trying to route all packets arriving at a particular interface by entering the same interface the virtual interface eth1: 2 and now everything is routed by default gw configured on eth1. eth1 Link encap:Ethernet HWaddr 0a:0e:64:18:52:72 inet addr:192.168.10.15 eth1:2 ...

10. AIX

LPAR missing virtual interface

Note: Newbie to IBM virtualization :-) Query: Created a new AIX7.1 lpar on a system with same config as one before however the new one is having issues going out to physical network. Now on comparison the only thing which differs between these two machines is an additional en1 and ent1 shown...

LEARN ABOUT NETBSD

mc

MC(4)							   BSD Kernel Interfaces Manual 						     MC(4)

NAME

     mc -- Ethernet driver for Am79C940 (MACE) onboard Ethernet

SYNOPSIS

     mc* at obio?

DESCRIPTION

     The mc interface provides access to a 10 Mb/s Ethernet network via the AMD Am79C940 (MACE) Ethernet chip set.

HARDWARE

     The mc interface supports the on-board Ethernet of the following mac68k machines:
	   -   Centris 660AV
	   -   Quadra 660AV
	   -   Quadra 840AV

     The mc interface supports the on-board Ethernet of the following macppc machines:
	   -   Apple Network Server (500 and 700)
	   -   Apple Power Macintosh (7300, 7500, 7600, 8500, 8600, 9500, and 9600)
	   -   Power Computing (PowerCenter, PowerCenter Pro, PowerCurve, PowerTower, PowerTower Pro, and PowerWave)

DIAGNOSTICS

     mc0 at obio0: address %s.	This is a normal autoconfiguration message noting the 6 byte physical Ethernet address of the adapter.

SEE ALSO

     mac68k/ae(4), mac68k/bm(4), gem(4), sn(4), tlp(4), ifconfig(8)

HISTORY

     The mc interface first appeared in NetBSD 1.3.

AUTHORS

     The mc Ethernet driver was written by Dave Huang <khym@bga.com>.  The man page was written by Thomas Klausner <wiz@NetBSD.org> and Michael
     Wolfson <mbw@NetBSD.org>.

BSD
								 December 13, 1997							       BSD