Guys where can i find values to add in /etc/system to make sun solaris 10 working better ? im sure there is alot of values but i dont know from where i can find them if you know any please send direct and if you know another sites send links to it, thanks so much. (5 Replies)
Dear Sun gurus,
I have Sun Fire V240 server with its StorEdge 3300 disk-array. Following are its disks appeared in format command. I have prepared its partitions thru format and metainit & metattach (may be i have made wrong steps, causing the errors below because I have done thru some document... (1 Reply)
Hello All.
I have Sun T1000 server with Solaris 10.
On T1000 installed EMC smarts, application for monitoring network devices via SNMP + SNMP.
So, Smarts has own DB (contains object - devices and relationships), file takes 30 mb, now, all queries to DB works very slow, so Smarts works too slow,... (5 Replies)
Hello,
i have a a1000 connected to an e6500. There's a raid 10 (12 disks) on the a1000.
If i do a
dd if=/dev/zero of=/mnt/1 bs=1024k count=1000
and then look at iostat it tells me there's a kw/s of 25000.
But if i do a
dd of=/dev/zero if=/mnt/1 bs=1024k count=1000
then i see only a... (1 Reply)
Hi,
I want to know if there is a command available for obtaining the BIOS Serial Number on a Sun Fire V240 machine? Or is it a known issue that it cannot be obtained through any command?
Thanks,
Vineet (4 Replies)
I have a sun fire v240 server.
The output of prtdiag -v shows a failed fan.
There are 3 fans for cooling system board.
There is 1 fan for each of the powersupply (There are 2 powersupplies)
From the below output how do i know which fan is bad and whats its location... (3 Replies)
Hi All, I'm new to this site. I have a few question since I'm in the process how to to repair my raid on Sun V240 Server.
1. How can we create RAID in Sun Sparc v240?
2. What utility can help people create RAID in Sun Sparc v240?
3. Do we need any special software to create the... (12 Replies)
Hi
If you had a choice of processor for a general purpose web server, either:
A. T1, 8-core. (in a T1000, 8GB, 72GB SAS x 2)
or
B. Dual 1.6GHZ USIIIi (in a Sun Blade 2500 Silver Workstation, 4GB, 146GB SCSI)
Would A be significantly better than B?
Even on single-threaded tasks?
I... (0 Replies)
Discussion started by: edik
0 Replies
LEARN ABOUT SUNOS
sleep
sleep(3C)sleep(3C)NAME
sleep - suspend execution for an interval of time
SYNOPSIS
#include <unistd.h>
unsigned int sleep(unsigned int seconds);
The caller is suspended from execution for the number of seconds specified by the argument. The actual suspension time may be less than
that requested because any caught signal will terminate the sleep() following execution of that signal's catching routine. The suspension
time may be longer than requested by an arbitrary amount because of the scheduling of other activity in the system. The value returned by
sleep() will be the ``unslept'' amount (the requested time minus the time actually slept) if the caller incurred premature arousal because
of a caught signal.
The use of the sleep() function has no effect on the action or blockage of any signal. In a multithreaded process, only the invoking thread
is suspended from execution.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Interface Stability |Standard |
+-----------------------------+-----------------------------+
|MT-Level |Async-Signal-Safe |
+-----------------------------+-----------------------------+
nanosleep(3RT), attributes(5), standards(5)
16 Mar 2005 sleep(3C)