Hi all.
I am seeing in one of our less-used servers that it crashed and now won't restart. I get the message 'continue with normal startup or boot into maintenance mode'.
I go into maintenance and run fsck on /usr0 (mentioned in error at restart) it then reboots but goes right back to 'continue with normal startup or boot into maintenance mode'.
metastat reports:
df -k shows nothing so not sure where to go from here.
I am not much of a unix admin so just curious as to what I can look into or do about this?
Thanks for all replies.
Jamie
Last edited by Yogesh Sawant; 02-22-2010 at 03:16 PM..
Reason: added code tags
Hello everybody!!
I need your help again.
I am using Sun Ultra sparc 60 machine.Follwing are the types of files getting generated in /var/tmp.
"windu_sm_o aaaa,baaa,caaa,daaa" etc.
I am not able to locate which application is generating these files.
Can I straightway delete these files ? or... (1 Reply)
I have just started getting into unix and aquired a Sun Ultra 5 however the disk failed and I want to replace it with a spare maxtor 40Gb i have lying around. I need to partition and format the disk from its old windows format. I have looked up info on the format command in solaris 9 and I think i... (2 Replies)
I just was given an Ultra 60 that I'm trying to get started so that I can re-load the system with Solaris 10. I can't seem to get the system to boot past the initial memory check. I've tried to do an Stop-A to get to the eeprom, but can't do that. My next step is to try to send a break from the... (0 Replies)
Hi all - I have an issue with our (way old) single processor SunFire 280R, running Solaris 9.0.4.
It won't boot even after multiple power cycles. There was a power outage last week end in the computer room, so this might have to do.
In normal boot mode, the screen shows a single line :
... (5 Replies)
First of all, I'd like to preface this post by relaying that I have considerable experience with FreeBSD but I'm a Linux newb. I've been attempting to compile linux-2.6.29.3 from source and I'm having some problems and have a few newb questions...
a) First of all, my kernel won't boot, it fails... (0 Replies)
Newbie question.
I've been running OpenSolaris on an Intel box for some time with great success.
I have just bought an old Sun Blade workstation with a corrupted version of Solaris 5 something on it.
The plan was to install OpenSolaris on it.
However beyond my skills, I see, as no Live CD (or... (10 Replies)
Folks;
My SUN Ultra 10 5.9 won't boot. It only stops after counting the memory on the white screen then hangs there with nothing. even the power button won't take it down from there, i had to unplug it then re-plug it again.
i inserted a disk with Solaris 9 iso trying to rebuild it but nothing... (1 Reply)
Hi all,
I managed to salvage form work an old Sun Sparc Ultra 30. I have had it stored (controlled storage) for a few years and decided to get it home and boot it up.
It starts up with a beep then I can hear disks spinning up, CDROM moving but nothing is displayed on the monitor.
Can... (2 Replies)
Hi all,
I've got a Sun ultra 30 workstation. the Nvram battery died so I replaced it. I reprogrammed the mac address using the mlpl command all that so it booted without error. But for some reason I was trying to boot via the network. So I did a STOP A and boot disk1 which is the alias for my SCSI... (2 Replies)
Hi all,
I've just replaced the eprom battery on my Sun Ultra-30 and having boot issues. For some reason its trying to boot off the network instead of the DISK1. Howe can I change it so the open boot does not default to the boot device: NET
Thanks,
Rob (3 Replies)
Discussion started by: robbo007
3 Replies
LEARN ABOUT OPENSOLARIS
sulogin
sulogin(1M) System Administration Commands sulogin(1M)NAME
sulogin - access single-user mode
SYNOPSIS
sulogin
DESCRIPTION
The sulogin utility is automatically invoked by init when the system is first started. It prompts the user to type a user name and password
to enter system maintenance mode (single-user mode) or to type EOF (typically CTRL-D) for normal startup (multi-user mode). The user should
never directly invoke sulogin. The user must have the solaris.system.maintenance authorization.
The sulogin utility can prompt the user to enter the root password on a variable number of serial console devices, in addition to the tra-
ditional console device. See consadm(1M) and msglog(7D) for a description of how to configure a serial device to display the single-user
login prompt.
FILES
/etc/default/sulogin
Default value can be set for the following flag:
PASSREQ
Determines if login requires a password. Default is PASSREQ=YES.
/etc/default/login
Default value can be set for the following flag:
SLEEPTIME
If present, sets the number of seconds to wait before login failure is printed to the screen and another login attempt is allowed.
Default is 4 seconds. Minimum is 0 seconds. Maximum is 5 seconds.
Both su(1M) and login(1) are affected by the value of SLEEPTIME.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsr |
+-----------------------------+-----------------------------+
SEE ALSO auths(1), login(1), consadm(1M), init(1M), su(1M), attributes(5), msglog(7D)NOTES
By default, the root user has all authorizations.
Granting the solaris.system.maintenance authorization to the Console User Rights Profile may have an undesirable side effect of granting
the currently logged in user maintenance mode access. The solaris.system.maintenance authorization should be directly granted to appropri-
ate users rather than through the Console User Rights Profile.
SunOS 5.11 21 Aug 2008 sulogin(1M)