E25k domain server am unable to access console. Post: 302397002

10 More Discussions You Might Find Interesting

1. HP-UX

Root account disabled and unable to access console

Hi, hope someone could help me here: Our root account was disabled on our production server this morning and usually we would login at the console to re-enable the account. However we are unable to get a login prompt at the console. The console displays the 8 options along the bottom and a...

2. Solaris

Is possible to start Xserver in a domain of E25K without graphics card?

Hi, I need to start the Xserver process in a domain of a E25K which has installed Solaris 8, however this domain doesn't have installed a graphic card, is this possible? Or is there any way to emulate this process? In fact I don't know how to stop or start the Xserver process, is with...

3. Solaris

unable to ping a host in another domain

Hello I have a server in it.siroe.com I added it.siroe.com in /etc/resolv.conf. I still can't ping the server. any service to restart here? any other file to edit? thx

4. Solaris

unable to qualify my own domain name

Dear All, I have machine SUNW,Sun-Fire-V240 with SunOS built there,everyday while I check messages,I found like below: Jul 7 19:41:00 pssk sendmail: unable to qualify my own domain name (pub-pssk) -- using short name Can any body help me to know and stop all messages,thank's for your...

5. Solaris

reset domain console in e6800

Hi unix guru's i have solaris server whose console is in e6800 box. I login to that e6800 and type showplatform . its showing the domail console is there for solaris box. now while i am trying to log in by using command console -d domain name. its saying console is busy. System Controller...

6. Solaris

Sun Fire V890 - Unable to access RSC or Serial console

Hello Folks, I am having trouble to login to rsc or serial console of V890. The rsc2.2.3 has been configured with required parameters, resetrs and even rebooted. When serial port is connected to laptop, The hyper terminal does not get the console or POSt messages when the server is rebooting...

7. AIX

P550 Unable to access Console

I have recently aquired the following machine: IBM,9113-550 Up until yesterday we could connect a dumb terminal to serial port 1 and get console login. However the dumb terminal died. We are now using a laptop with a null modem cable attached to serial port 1. This works perfectly for all of...

8. AIX

How to access console for P650 server.

Hi Everyone, we had a one IBM P650 standalone server, planning to install AIX OS on top of it, I don't have HMC, is their a way to access to console of the server using serial cable or any other option for installing OS on top of it. Thanks,

9. Red Hat

Unable to access NFS share on Solaris Server from Linux client

Hi, I am trying to access a NFS shared directory on Solaris 10 Server from a client which is RHEL 4 Server. On the NFS Server, in /etc/dfs/, I added following line to dfstab file. share -F nfs -o rw /var/share & then ran the following svcadm -v enable -r...

10. Solaris

Certain domain cannot access

hi there, im beginner in solaris 10. we are using solaris 10 as our DNS server Solaris 10 8/07 s10s_u4wos_12b SPARC Copyright 2007 Sun Microsystems, Inc. All Rights Reserved. Use is subject to license terms. ...

LEARN ABOUT XFREE86

asadmin-start-domain

asadmin-start-domain(1AS)					   User Commands					 asadmin-start-domain(1AS)

NAME

       asadmin-start-domain, start-domain - starts the given domain

SYNOPSIS

       start-domain [--domaindir install_dir/domains] [--terse=false] [--echo=false] [--verbose=false] [--debug] [domain_name]

       start-domain  starts the specified domain. If there is only one domain in the default domain directory (install_dir/domains), then no oper-
       and is required to start the domain. However, if there is more than one domain, the domain operand must be specified. This command can only
       be run locally.

OPTIONS

       --domaindir	       directory where the domain is to be started. If specified, path must be accessible in the filesystem. If not speci-
			       fied, the domain is started in the default install_dir/domains directory.

       --terse		       indicates that any output data must be very concise, typically avoiding human-friendly sentences and favoring well-
			       formatted data for consumption by a script. Default is false.

       --echo		       setting to true will echo the command line statement on the standard output. Default is false.

       --verbose	       by  default this flag is set to false. If set to true, detailed server startup output is displayed. Press CTRL-C to
			       kill the server. Press CTRL- to print a thread dump.

       --debug		       by default this flag is set to false. If set to true, the server is started in debug mode and prints the JPDA  port
			       on the console.

OPERANDS

       domain_name	       name of the domain. Must be a unique name.

       Example 1: Using start-domain

       asadmin> start-domain sampleDomain
       Starting Domain sampleDomain, please wait.
       Domain sampleDomain started

       Where: the sampleDomain domain is started.

EXIT STATUS

       0		       command executed successfully

       1		       error in executing the command

       asadmin-create-domain(1AS), asadmin-delete-domain(1AS), asadmin-stop-domain(1AS), asadmin-list-domains(1AS)

J2EE 1.4 SDK							    March 2004						 asadmin-start-domain(1AS)

10 More Discussions You Might Find Interesting

1. HP-UX

Root account disabled and unable to access console

Discussion started by: AaronC

2. Solaris

Is possible to start Xserver in a domain of E25K without graphics card?

Discussion started by: wolf8006

3. Solaris

unable to ping a host in another domain

Discussion started by: melanie_pfefer

4. Solaris

unable to qualify my own domain name

Discussion started by: fredginting