Sponsored Content
Operating Systems Solaris Can't remove a LUN from a Zpool! Post 302391608 by hergp on Tuesday 2nd of February 2010 02:21:36 AM
Old 02-02-2010
According to the man page you can only remove hotspare and cache devices with the zpool remove command. You can also remove devices from a mirror using the zpool detach command, as long as it is not the last submirror.

So there is no way to shrink a zpool at this time. But there is a RFE (4852783) to implement this feature.
 

10 More Discussions You Might Find Interesting

1. Solaris

Remove the exported zpool

I had a pool which was exported and due to some issues on my SAN i was never able to import it again. Can anyone tell me how can i destroy the exported pool to free up the LUN. I tried to create a new pool on the same pool but it gives me following error # zpool create emcpool4 emcpower0c... (0 Replies)
Discussion started by: fugitive
0 Replies

2. Solaris

I have LUN ID, how to find disk relate to that LUN ID?

I have a list of LUN ID, my task is to find if disk has been added or not. How do I do that? I have been searching the forum and not able to find answer. thanks (4 Replies)
Discussion started by: uuontario
4 Replies

3. Solaris

ZPOOL help..

hi ... i have added a physical disk to the pool with ""zpool add <poolname> diskname"""... after that i realized that i have to mirror it instead..then i tried to take that disk out of the pool but i m not able to do that.. i have gone through many unix help sites , nothing worked , so please... (6 Replies)
Discussion started by: yrajendergoud
6 Replies

4. UNIX for Advanced & Expert Users

How to remove the LUN in RHEL?

Hi, How to remove the allocate SAN Lun on the Linux Server. I am using rhel 5.8. I have assigned a LUN to the existing Volume group. For eg: I have allocated a LUN with 20GB to the existing volume group(test123). Now, how can I take back the allocated lun without any issues. (1 Reply)
Discussion started by: gsiva
1 Replies

5. Solaris

Bad exchange descriptor : not able to remove files under zpool

Hi , One of my zone went down and when i booted it up i could see the pool in degraded state with some check sum errors . we have brought the pool online after scrubbing. But few files are showing this error Bad exchange descriptor Please let me know how to remove these files (2 Replies)
Discussion started by: chidori
2 Replies

6. Solaris

Lun remove, stuck in /dev/dsk and /dev/rdsk

So, we removed a LUN from the SAN and the system is refusing to remove the references to it in the /dev folder. I've done the following: devfsadm -Cv powermt -q luxadm -e offline <drive path> luxadm probe All those commands failed to remove the path. The drive stills shows up as <drive... (13 Replies)
Discussion started by: DustinT
13 Replies

7. Solaris

Cannot remove disk added to zpool

I added a disk to a zpool using "zpool add diskname" My intention was mirror a zpool disk that no mirror; that is a zpool with only one disk. I did not issue the right command. Now, the disk has been added successfully but I cannot remove nor detach it as Solaris 11 thinks it has data on it... (14 Replies)
Discussion started by: LittleLebowski
14 Replies

8. Solaris

Restore of Netapp FC lun targets used as the disks for a zpool with exported zfs file systems

So, We have a Netapp storage solution. We have Sparc T4-4s running with LDOMS and client zones in the LDOMS, We are using FC for storage comms. So here's the basic setup FC luns are exported to the primary on the Sparc box. using LDM they are then exported to the LDOM using vdisk. at the... (4 Replies)
Discussion started by: os2mac
4 Replies

9. Solaris

How to remove a LUN in "Online Busy" state?

Hi all, I have a LUN that is in "Online Busy" when I issue the dev_gestate subcommand of luxadm: root@es088wb6:~# luxadm -v -e dev_getstate /dev/rdsk/c21t50050763090887FEd4s2 phys path = "/devices/pci@6c0/pci@1/pci@0/pci@4/SUNW,qlc@0/fp@0,0/ssd@w50050763090887fe,4:c,raw" ... (5 Replies)
Discussion started by: ludiegu
5 Replies

10. Solaris

Zpool mirroring

Now this doesnt look right to me. All of these disks are 100Gb LUNS so total zpool size is 300Gb. Am I right in saying that this zpool consists of two disks plus one more disk that is 6 way mirrored? So a bit pointless because only one of the three is mirrored (and 6 way is a bit of overkill... (3 Replies)
Discussion started by: psychocandy
3 Replies
metaoffline(1M) 					  System Administration Commands					   metaoffline(1M)

NAME
metaoffline, metaonline - place submirrors offline and online SYNOPSIS
/usr/sbin/metaoffline -h /usr/sbin/metaoffline [-s setname] [-f] mirror submirror /usr/sbin/metaonline -h /usr/sbin/metaonline [-s setname] mirror submirror DESCRIPTION
The metaoffline command prevents Solaris Volume Manager from reading and writing to the submirror that has been taken offline. While the submirror is offline, all writes to the mirror will be kept track of (by region) and will be written when the submirror is brought back online. The metaoffline command can also be used to perform online backups: one submirror is taken offline and backed up while the mirror remains accessible. (However, if this is a two-way mirror, data redundancy is lost while one submirror is offline.) The metaoffline command differs from the metadetach command because it does not sever the logical association between the submirror and the mirror. To completely remove a submirror from a mirror, use the metadetach command. A submirror that has been taken offline will only remain offline until the metaonline command is invoked or the system is rebooted. When the metaonline command is used, reading from and writing to the submirror resumes. A resync is automatically invoked to resync the regions written while the submirror was offline. Writes are directed to the submirror during resync. Reads, however, will come from a dif- ferent submirror. Once the resync operation completes, reads and writes are performed on that submirror. The metaonline command is only effective on a submirror of a mirror that has been taken offline. The metaoffline and metaonline commands can not be used on RAID 1 volumes in application-based recovery (ABR) mode. A submirror that has been taken offline with the metaoffline command can only be mounted as read-only. OPTIONS
Root privileges are required for all of the following options except -h. -f Forces offlining of submirrors that have slices requiring maintenance. -h Displays usage message. -s setname Specifies the name of the diskset on which metaoffline and metaonline will work. Using the -s option will cause the com- mand to perform its administrative function within the specified diskset. Without this option, the command will perform its function on local metadevices. mirror Specifies the metadevice name of the mirror from which the submirror will be either taken offline or put online. submirror Specifies the metadevice name of the submirror to be either taken offline or put online. EXAMPLES
Example 1: Taking a Submirror Offline This example takes one submirror, d9, offline from mirror d10. # metaoffline d10 d9 EXIT STATUS
The following exit values are returned: 0 Successful completion. >0 An error occurred. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWmdu | +-----------------------------+-----------------------------+ SEE ALSO
mdmonitord(1M), metaclear(1M), metadb(1M), metadetach(1M), metahs(1M), metainit(1M), metaparam(1M), metarecover(1M), metarename(1M), metareplace(1M), metaroot(1M), metaset(1M), metassist(1M), metastat(1M), metasync(1M), metattach(1M), md.tab(4), md.cf(4), mddb.cf(4), md.tab(4), attributes(5), md(7D) Solaris Volume Manager Administration Guide NOTES
The metaonline and metaoffline commands are not applicable to mirrors in application-based recovery (ABR) mode. SunOS 5.10 12 Apr 2004 metaoffline(1M)
All times are GMT -4. The time now is 04:50 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy