I tried using Windump - a port of tcpdump - to see if I could catch anything. I set it to listen for incoming on port 9100 but couldn't see anything. (I could see traffic if I listened for other devices on the LAN.) This caused me to think that the stream might be interactive.
Any other ideas? I'll mess around with tcpdump/Windump between to laptops and see if I can understand how it's supposed to work.
---------- Post updated at 07:32 PM ---------- Previous update was at 06:49 PM ----------
Right. Two XP laptops.
Source: 192.168.3.3, with a generic/text printer driver pointing to 192.168.3.4, port 9100.
Dest: 192.168.3.4 (Hohner) running WinDump. WinDump listening to port 9100.
Here's what I got when I try to print "Hallo World!" from Notepad on source machine ...
It keeps repeating this and the print queue on source machine never clears. It looks like the source is expecting a response from dest.
Any ideas how to spoof a response from the "printer"?
Am I mad?
Last edited by transistor; 01-22-2010 at 03:46 PM..
Reason: Improved clarity - I hope!
OS: HP-UX B.11.11 U
Printer: HP 8150.
I require a font to be downloaded to the printer and used.
As documented the steps are:
1. Tell printer to accept font
2. Send the font to the printer
3. Make the font permanent
4. Select font for use
or in PCL
1. <Esc>*c90D
2.... (0 Replies)
Hi,
i willbe very much grateful to u if u help me out..
if i simply connect pbx machine to printer by serial port RS232 then we find this view:
But i want to capture this data into database automatically when the pbx is running.The table in database will contain similar to this view inthe... (1 Reply)
Hi All :
I wanted a unix command by which I could be able to print the output to a file and at the same time to a printer. Any help will be greatly appreciated.
Regards,
Ramamurthy Dasari (1 Reply)
I installed an old laser printer using a print server. I can use from windows but not from unix. I set up the printer in unix as a remote printer and can ping the print server from a unix promt. I am thinking that I must open a port to the print server. Any suggestions? (3 Replies)
I need to setup a HP 4000 PCL printer - it seems out of the box - I can only can use PostScript. Any guidance is appreciated.
In the SCO world - I used HPNP with no problems. (2 Replies)
I've looked around and am able to print landscape to a PCL 5 printer with this command:
lp -o landscape -o cpi=20 -o page-right=30 -o page-left=30
-d <printer> <file>.
Which gives me a nice 200 columns.
But, when I send the same output and the same commands to a PCL 6 printer, it comes... (3 Replies)
Hello all,
I need to setup a print server that listens on three separate network interfaces, and sends jobs to the corresponding print queue. Example:
192.168.69.100 - printer1 -> Out to 139.177.69.100:9100
192.168.69.101 - printer2 -> Out to 139.177.69.101:9100
192.168.69.102 - printer2 ->... (3 Replies)
Help!
I have to solve an urgent problem!
I have a Solaris 10 server, where I created a line of printing with the command
# /usr/sbin/lpadmin -p IL_Printer -s pv24002 -v /dev/null -m netstandard_foomatic -A write -n /usr/lib/lp/model/ppd/system/foomatic/Canon/cnl66e1.ppd.gz -o... (0 Replies)
I am trying to get a network printer to work that currently works from my Unix (5.0.7) server when printing text files only. When I try to print post script files like a PDF file I get all of the controls so I am not sure if I have my printer configuration setup properly in Unix
The printer... (1 Reply)
I am trying to get an output using the command
tcpdump -w /tmp/syn.pcap 'tcp & (tcp-syn) != 0'
But I am getting the error:
tcpdump: no suitable device found
Is there an alternate command to achieve this? (4 Replies)