01-10-2010
Quote:
Originally Posted by
incredible
First, to resolve the issue quick way, poweroff the system. remove the RSC card. power on the system with the serial connected. pull out your boot disks, to prevent the system from booting off first. You should see ok> prompt. From there, redo your configuration process of the RSC. It might help. I understand that itmay be a painful process
the rsc can only be configured from os level. so you have to boot solaris and install the rsc software. as i understand the problem, the communication with the terminal software is the problem here. so i suggested to use another software to do the communication...
9 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
looking for the answer to console port access via 25pin serial. Can i tip in from another unix box for access? (5 Replies)
Discussion started by: simplimarvelous
5 Replies
2. AIX
I have installed aix 5.2 on aix box through serial console connected to COM 1 . I even get a login prompt after the fresh installation . But as soon as i give a root & enter i again get a login prompt.i..e I am not able to logon after a fresh installation.
and even i configured IP configuration... (0 Replies)
Discussion started by: linuxnightowl84
0 Replies
3. Solaris
Hi all,
After the V890 server shutdown unexpectedly, it became unaccessible from RSC. There is one error message about it: rscadm: RSC firmware not responding
Do you have experienced this? Please help! (1 Reply)
Discussion started by: bamboonix
1 Replies
4. UNIX for Dummies Questions & Answers
Hi everybody
i am trying to telnet to sun server from win xp machine but getting message "x21 error connection closed by remote user". i had make changes in /etc/default/login & /etc/fuser file still i have not getting telnet access. my win xp machines ip is 10.205.121.177 & sun server ip is... (1 Reply)
Discussion started by: pshelke
1 Replies
5. Solaris
Hi,
Can anyone suggest me any USB Hard Disk Drive which I can connect to Sun Fire V890 and take backup at a quick speed. A test with SolidState USB Hard Drive for backup work was taking writing at 2GB per hour for a 75GB backup.
Regards,
Tushar Kathe (1 Reply)
Discussion started by: tushar_kathe
1 Replies
6. Solaris
Hi,
I want to know if there is a command available for obtaining the BIOS Serial Number on a Sun Fire V240 machine? Or is it a known issue that it cannot be obtained through any command?
Thanks,
Vineet (4 Replies)
Discussion started by: vineetd
4 Replies
7. Solaris
Hi Gurus
I would like to know whether break command always work well means take the system to ok> prompt. Its depend upon sever model also. As I am facing problem when ever my system ( Sunfire V890 ) having Solaris 10 OS & oracle RAC on it goes to hang state then I run the break command from... (6 Replies)
Discussion started by: girish.batra
6 Replies
8. Solaris
I am battling to get a V890 up and running. The system appears to have AUTOBOOT=false, so no OS comes up when it's powered on, and I do not have the credentials to get to the RSC management console. Output to ttya serial console ends at "Probing I/O buses", I assume because output is then being... (4 Replies)
Discussion started by: dstmark
4 Replies
9. Solaris
Hi Oracle Hardware Specialists,
I have shutdown a Sun Fire X2200 server running Solaris 10 x86 to single user mode to experiment some backup commands using Web based Sun embedded Lights Out Manager Redirection to open up a console session. However, it is not possible to copy & past text with... (7 Replies)
Discussion started by: gjackson123
7 Replies
LEARN ABOUT CENTOS
systemd-getty-generator
SYSTEMD-GETTY-GENERATOR(8) systemd-getty-generator SYSTEMD-GETTY-GENERATOR(8)
NAME
systemd-getty-generator - Generator for enabling getty instances on the console
SYNOPSIS
/usr/lib/systemd/system-generators/systemd-getty-generator
DESCRIPTION
systemd-getty-generator is a generator that automatically instantiates serial-getty@.service on the kernel console /dev/console if that is
not directed to the virtual console subsystem. It will also instantiate serial-getty@.service instances for virtualizer consoles, if
execution in a virtualized environment is detected. This should ensure that the user is shown a login prompt at the right place, regardless
of which environment the system is started in. For example, it is sufficient to redirect the kernel console with a kernel command line
argument such as console= to get both kernel messages and a getty prompt on a serial TTY. See kernel-parameters.txt[1] for more information
on the console= kernel parameter.
systemd-getty-generator implements the generator specification[2].
Further information about configuration of gettys you may find in systemd for Administrators, Part XVI: Gettys on Serial Consoles (and
Elsewhere)[3].
SEE ALSO
systemd(1), agetty(8)
NOTES
1. kernel-parameters.txt
https://www.kernel.org/doc/Documentation/kernel-parameters.txt
2. generator specification
http://www.freedesktop.org/wiki/Software/systemd/Generators
3. systemd for Administrators, Part XVI: Gettys on Serial Consoles (and Elsewhere)
http://0pointer.de/blog/projects/serial-console.html
systemd 208 SYSTEMD-GETTY-GENERATOR(8)