01-08-2010
From my experience, I have seen many many X machines with regular problems.. VMware hang, windows crash, Solaris hang, HDD no LED though format sees it, less memory shown on OS instead of showing correct memory size, memory failure intermittently or system has amber LED.... Most of these problems were SOLVED by upgrading from earlier releases from iLOM to the latest and of course, migrate from eLOM to iLOM for all systems, which SUN announced openly to all.
10 More Discussions You Might Find Interesting
1. Solaris
Hi,
I ;ve a SUN x4600 running solaris 10. I want to connect to the system remotely form console like we can connect to sparc sc or alom .. (9 Replies)
Discussion started by: fugitive
9 Replies
2. Solaris
I 've 2 different T5220 and both are showing different prompts when i ssh to the console.
1. Shows sc> ALOM
2. Shows -> ILOM
as far as i know the T5220 comes with ILOM , so why i 'm seeing 2 different type of console for same tyep of hardware ?
and i found that we... (6 Replies)
Discussion started by: fugitive
6 Replies
3. Solaris
I bought a new Netra X4450 and this is my first time experience with intel based Sun server. I powered on the machine and went through the Sun wizard to complete OS configuration. Now I am on the root prompt and trying to get to the ILOM. On Sparc based servers I used to be able to go to the ILOM... (4 Replies)
Discussion started by: StarSol
4 Replies
4. Solaris
One of my X4600 server had a power loss and rebooted and now its giving me a strange problem servers internal disk controller naming has changed by itself ... the after failsafe boot md.conf file shows following c3txdx but shows internal disk at c4txdx ... what could be the reason for this and... (1 Reply)
Discussion started by: fugitive
1 Replies
5. Solaris
Hi,
I am just confused with iLOM. Is iLOM is applicable for SPARC as well as X86 servers?? which are having CMM. Hope ALOM will be applicable for rest of the servers like v240 kind of series.
Can any one pls clarify this??
Thanks in Advance
Vaisakh K S (3 Replies)
Discussion started by: vks47
3 Replies
6. Solaris
Hi Folks,
Has anyone seen these errors on bootup.
Mar 15 12:22:30 svc.startd: svc:/system/device/local:default: Method "/lib/svc/method/devices-local" failed due to signal SEGV.ht (c) 1983, 2010,
Oracle and/or its affiliates. All rights reserved.
Configuring devices. ... (1 Reply)
Discussion started by: ESSTEAM
1 Replies
7. Hardware
Hi
I have a new SUN X4270 server. I am trying to login to the server's ILOM using it's serial management port from a Windows machine but am not getting any login prompt from the server.
I am using a RJ-45/DB-9 adaptor. After connecting the adaptor, I am opening the serial connection using... (3 Replies)
Discussion started by: mystition
3 Replies
8. Hardware
Booting and checking BIOS there is no option to enable-disable hyperthreading.
I have 8 Dual-Core AMD Opteron(tm) Processor 8220 and I see 16 cores.
Enable hyperthreading I should have 32 cores.
I have red hat 5.4 installed.
Anyone know how can enable hypethreading ? I have last BIOS/Firmware... (2 Replies)
Discussion started by: laxtnog
2 Replies
9. Hardware
Hi All,
I am having an Sun fire X4600 M2 server where one of the interfaces is down.
I had requested for the replacement but had a bit problem in identifying the port.
As per the server service module, there are 4 NIC ports and one port is not flashing (e1000g0) but as per server, the port... (8 Replies)
Discussion started by: Rockyc3400
8 Replies
10. Solaris
Dear all
would you tell me the command in ILOM to :
- Check for error logged in ILOM ouput
- Check for system uptime (DAYS)
- Check for system reboot logged (Last system reboot)
Thank you (1 Reply)
Discussion started by: gema.utama
1 Replies
LEARN ABOUT HPUX
install-solaris
install-solaris(1M) install-solaris(1M)
NAME
install-solaris - install the Solaris operating system
SYNOPSIS
install-solaris
install-solaris invokes the Solaris Install program. Depending on graphical capability and available memory at the time of invocation,
install-solaris invokes either a text-based installer or a graphical installer.
The following minimum requirements for physical memory dictate which features are available during installation:
For SPARC machines:
128 MB
Minimum physical memory for all installation types
128 MB
Minimum physical memory required for windowing system
384 MB
Minimum physical memory required for graphical-based installation
For x86 machines:
256 MB
Minimum physical memory for all installation types
256 MB
Minimum physical memory required for windowing system
512 MB
Minimum physical memory required for graphical-based installation
In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number of fea-
tures available.
install-solaris exists only on the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the for more
details.
install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the
installation media. Refer to the for disk space requirements.
Refer to the for more information on the various menus and selections.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcdrom (Solaris instal- |
| |lation media) |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
pkginfo(1), install(1M), pkgadd(1M), attributes(5)
It is advisable to exit install-solaris by means of the exit options in the install-solaris menus.
23 Sep 2005 install-solaris(1M)