do you have Sysinfo installed? if not, install it using Synaptic Package Manager or
in the Sysinfo window, click Hardware in the left panel and select Network from the drop down box
Hi, I have a Unix box running HP-UX 10.20 and it suddenly won't boot. Every time it goes down the boot checklist, it hangs on "NFS client subsystem" and just continues to say busy/wait. I have read something about the /etc/auto_master but don't quite understand what has to happen to fix it. ... (4 Replies)
aix 4.3
I get the following error from the errpt log
BD797922 0306170008 P H enclosure0 SUBSYSTEM FAILURE
I'm not clear on this kind of error. It never happened to me.
What do this errors mean, and how do I clear or solve them?
Any help is appreciated. (2 Replies)
Hello All,
Does some one have any idea about the subsystem component failure. Errpt command throws below errors for my server :-
# errpt
IDENTIFIER TIMESTAMP T C RESOURCE_NAME DESCRIPTION
B9735AF4 0304222408 P H hdisk5 SUBSYSTEM COMPONENT FAILURE
B9735AF4 0304222408 P H... (1 Reply)
Hello,
I'm trying to generate a subsystem which supports startsrc, stopsrc and refresh
I want to specify special arguments in case of stopsrc and refresh
for example:
startsrc:
/bin/testscript start
stopsrc:
/bin/testscript stop
refresh:
/bin/testscript restart
which should be... (0 Replies)
All,
I enabled PAM and aged a password, but when I login it asks me for the current password then says password unchanged after entering the current password. Is this a bug? My security dept is going to want me to enable password aging and I'm stuck!
Any help on what the issu is?
... (6 Replies)
I have several ssh servers *running aix 5.3 and they respond to sftp requests just fine, but I have one that requires clients to specify the path to the sftp server using the -s flag which is*/usr/sbin/sftp-server
I check the sshd_config across all servers and they are the same. *The other... (1 Reply)
Recently moved a HP Unix B.10.20 system from US to Thailand, and everything is work well in US but after we changed:
1. set_parms ip_address (change the IP to TH range)
2. set_parms addl_netwrk (change the Subnet, Gateway, Domain name, DNS Svr Name, and DNS IP)
3. vi /etc/hosts (to commented... (4 Replies)
All,
I wanted to get others opinions on providing root access to vendors. I have a vendor that is claiming to need full root sudo access to complete a one time system set up for their software. The system is on our corporate network and we never provide this level of access. Not only that,... (7 Replies)
Discussion started by: hburnswell
7 Replies
LEARN ABOUT HPUX
gvid_no_claim_dev
gvid_no_claim_dev(5) File Formats Manual gvid_no_claim_dev(5)NAME
gvid_no_claim_dev - PCI Vendor/Device ID that the gvid graphics driver will not claim
VALUES
Failsafe
Default
Allowed values
Recommended values
Specific to the device you wish to prevent from claiming.
DESCRIPTION
This tunable specifies the PCI Vendor ID and/or Device ID of a graphics device that the HP graphics driver should not claim.
The graphics driver was designed to be a general purpose driver for all PCI graphics cards. As a result, the driver will attempt to claim
any PCI graphics display device found on the system. This can be a problem for graphics device developers who need their own graphics
driver to claim their own graphics device.
The value of will specify a PCI Vendor ID and/or Device ID of a graphics card that the gvid graphics driver should not claim. It is a 32
bit number, with the upper 16 bits containing the PCI Vendor ID and the lower 16 bits containing the PCI Device ID. Either the Vendor ID
or Device ID can use a wildcard value of
For example, if is set to the value the driver will ignore graphics devices with a PCI Vendor ID of and a Device ID of If is set to the
driver will not claim any graphics cards with a Vendor ID of regardless of the Device ID.
Who Is Expected to Change This Tunable?
Anyone who wishes the graphics driver to ignore a specific graphics device. This will typically be someone writing their own graphics
driver for their own hardware.
Restrictions on Changing
Changes to this tunable take effect at the next reboot.
What Other Tunables Should Be Changed at the Same Time?
None.
WARNINGS
All HP-UX kernel tunable parameters are release specific. This parameter may be removed or have its meaning changed in future releases of
HP-UX.
Installation of optional kernel software, from HP or other vendors, may cause changes to tunable parameter values. After installation,
some tunable parameters may no longer be at the default or recommended values. For information about the effects of installation on tun-
able values, consult the documentation for the kernel software being installed. For information about optional kernel software that was
factory installed on your system, see at
AUTHOR
was developed by HP.
Tunable Kernel Parameters gvid_no_claim_dev(5)