Mount old zfs filesystem Post: 302380139

7 More Discussions You Might Find Interesting

1. Solaris

How do I export a zfs filesystem that I created?

I created a zpool and two ZFS volumes in OpenSolaris. I would like both ZFS volumes to be exportable. However, I don't know how to set that up. These are the steps I did: 1) Create the zpool using raidz1 across five disks. I have six disks and created a zpool across 5 of them. c4t0d0...

2. Solaris

Why does the # of blocks change for a file on a ZFS filesystem?

I created a zpool and zfs filesystem in OpenSolaris. I made two NFS mount points: > zpool history History for 'raidpool': 2009-01-15.17:12:48 zpool create -f raidpool raidz1 c4t1d0 c4t2d0 c4t3d0 c4t4d0 c4t5d0 2009-01-15.17:15:54 zfs create -o mountpoint=/vol01 -o sharenfs=on -o...

3. Filesystems, Disks and Memory

Howto Convert a filesystem from Veritas to ZFS?

Hi Folks, Looking for info here more than any actual HowTo, does anyone know if there is an actual way of converting a Veritas or UFS filesystem to ZFS leaving the resident data intact. All that I have been able to find, including the commercial products seem to require the FS backed up from...

4. AIX

Mount Filesystem in AIX Unable to read /etc/filesystem

Dear all, We are facing prolem when we are going to mount AIX filesystem, the system returned the following error 0506-307The AFopen call failed : A file or directory in the path name does not exist. But when we ls filesystems in the /etc/ directory it show -rw-r--r-- 0 root ...

5. Solaris

ZFS Filesystem

Hi, Recently we have new server T5 Oracle. We set up it for our database. For out database files we set one zfs filesystem. When i use iostat -xc the output as below. As you see the value for vdc4 is quite high. extended device statistics cpu device ...

6. Solaris

Extend zfs storage filesystem

Hello, Need to ask the question regarding extending the zfs storage file system. currently after using the command, df -kh u01-data-pool/data 600G 552 48G 93% /data /data are only 48 gb remaining and it has occupied 93% for total storage. zpool u01-data-pool has more then 200 gb...

7. UNIX for Beginners Questions & Answers

How to finish expanding a zfs filesystem?

I have a esxi 6.7 server running a Solaris 10 x86 vm (actually a bunch of them). The VM uses zfs for the pools (of course). I expand the underlying ESX logical disk, for example from 50GB to 100gb, then I set autoexpand=on <pool> that belongs to the esx logical disk. what am i missing to...

LEARN ABOUT REDHAT

tapeinfo

TAPEINFO(1)						      General Commands Manual						       TAPEINFO(1)

NAME

       tapeinfo - report SCSI tape device info

SYNOPSIS

       tapeinfo -f <scsi-generic-device>

DESCRIPTION

       The  tapeinfo  command  reads  various information from SCSI tape drives that is not generally available via most vendors' tape drivers. It
       issues raw commands directly to the tape drive, using either the  operating  system's  SCSI  generic  device  (	e.g.  /dev/sg0	on  Linux,
       /dev/pass0 on FreeBSD) or the raw SCSI I/O ioctl on a tape device on some operating systems.

       One  good  time	to  use 'tapeinfo' is immediately after a tape i/o operation has failed. On tape drives that support HP's 'tapealert' API,
       'tapeinfo' will report a more exact description of what went wrong.

       Do be aware that 'tapeinfo' is not a substitute for your operating system's own 'mt' or similar tape driver control program. It is intended
       to supplement, not replace, programs like 'mt' that access your operating system's tape driver in order to report or set information.

OPTIONS

       The first argument, given following -f , is the SCSI generic device corresponding to your tape drive.  Consult your operating system's doc-
       umentation for more information (for example, under Linux these are generally start at /dev/sg0 under FreeBSD these start at /dev/pass0).

       Under FreeBSD, 'camcontrol devlist' will tell you what SCSI devices you have, along with which 'pass' device controls  them.  Under  Linux,
       "cat /proc/scsi/scsi" will tell you what SCSI devices you have.

BUGS AND LIMITATIONS

       This program has only been tested on Linux with a limited number of tape drives (HP DDS4, Seagate AIT).

AVAILABILITY

       tapeinfo  is  currently being maintained by Eric Lee Green <eric@badtux.org> formerly of Enhanced Software Technologies Inc. The 'mtx' home
       page is http://mtx.sourceforge.net and the actual code is currently available there and via CVS from http://sourceforge.net/projects/mtx/ .

SEE ALSO

       mt(1),mtx(1),scsitape(1)

								    TAPEINFO1.0 						       TAPEINFO(1)