Can't connect to Internet Post: 302379842

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Cannot connect to the Internet

I running HPUX 11.0, Netscape gives me an error "Unable to locate Server" when using a www.something.com address. If I use an IP address I get past the router and onto the Internet. My workstation can get to the Router @ 192.168.0.1 and also it's local APACHE server. I have DHCP enabled...

2. Solaris

How to connect Solaris 10 to the internet ?!

ive installed a fresh copy of solaris 10 on a E3500 Server machine, i gave it a static IP address , 192.168.1.15 its a test server in our office (small office) we are using LINKSYS as our internet router and DHCP as well .. its IP is 192.168.1.1 and ive added this IP as Default route on the server...

3. Solaris

trying to connect to internet

i have just installed solaris 10 on a 60 gb hard drive. now im trying to install my nic driver but when i put in the floppy disk for the nic card it cant read it, so then i found that i have to mount the floppy drive and i tried putting in the mount command but i dont know where to mount it and if...

4. Solaris

how to connect to internet on Solaris 10

Hi, I am new to Solaris just migrating from Windows XP. I want to connect to internet but I have problem with configuration. My ISP has provided me a router.I get internet connection through DHCP. I don't know any proxy or subnetmask or any IP address that requires during configuration of...

5. Solaris

How to connect to Internet

Hi I installed solaris developer edition 1/08 today.I want to connect to Broadband internet through my ADSL 2+ Modem/Router with a username and password. plz help in this case,I am new to sun solaris:confused: the modem itself is a router it worked well on ubuntu and red hat

6. Linux

how to connect internet????

HI, Am using GPRS ( MOB # 3230 ) internet connection in windows Hw to use internet r connect in linux.. ( Red Hat Linux Ver.10 ) Please help me.. Thanks in adv..

7. UNIX for Dummies Questions & Answers

Solaris 10 - How to connect to internet

I recently installed solaris 10 on a seperate hard disk in my desktop pc. My first hard disk is running windows xp. I am totally new to solaris. Please help me to connect to the internet through solaris 10. I read a few threads, and re-installed solaris 10 by giving 'Yes' to the question that...

8. Linux

How to connect to internet

Hi, Can someone guide me regarding how to connect to internet. what are steps? Thanks in advance

9. Red Hat

How to connect internet in Linux OS?

What all is required so that I can use internet on my Linux OS My OS: Red Hat Fedora version: 2.6 I have to connect via my Nokia cell phone via cable. This way only I had been using internet on my Windows OS. If any software is required to install on my UNIX for internet, then I don't...

10. IP Networking

How to connect internet in Linux OS

How to enable internet on my Linux OS My OS: Red Hat Fedora Release 9 (Sulphur) version: 2.6 I have to connect via my Nokia cell phone via cable. This way only I had been using internet on my Windows OS. If any software is required to install on my UNIX for internet, then I don't have any. If...

LEARN ABOUT SUSE

tgt-setup-lun

tgt-setup-lun(8)					      System Manager's Manual						  tgt-setup-lun(8)

NAME

       tgt-setup-lun - creates a target, adds a device to the target and defines initiators that can connect to the target

SYNOPSIS

       tgt-setup-lun -d device -n target_name [initiator_IP1 initiator_IP2 ...] [-h]

DESCRIPTION

       Starts tgtd if necessary and creates a target according to the supplied target_name. The format of the target name is as follows:
       iqn.2001-04.com.<hostname>-<target_name> The target name must be unique.

       The  script then adds the requested device to the target. If specific IP addresses are defined, it adds them to the list of allowed initia-
       tors for that target. If no IP addresses is defined, it defines that the target accepts any initiator.

EXAMPLES

       Create a target that uses /dev/sdb1 and allows connections only from 192.168.10.81:
       tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81

       Create a target that uses /dev/sdb1 and allows connections only from 192.168.10.81 and 192.168.10.82:
       tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81 192.168.10.82

       Create a target that uses /dev/sdb1 and allows connections from any initiator:
       tgt-setup-lun -d /dev/sdb1 -n my_target

       Display help:
       tgt-setup-lun -h

AUTHOR

       Written by Erez Zilber

REPORTING BUGS

       Report bugs to <erezz@voltaire.com>.

COPYRIGHT

       Copyright (C) Voltaire Ltd. 2008.

																  tgt-setup-lun(8)