# ioscan -f | grep disk
Class I H/W Path Driver S/W State H/W Type Description
disk 3 0/0/2/0.0.0.0 sdisk CLAIMED DEVICE TEAC DV-28E-N
disk 1 0/1/1/0.0.0 sdisk CLAIMED DEVICE HP 146 GST3146707LC ... (1 Reply)
Hi,
I had a doubt regarding device mapper notations and their corresponding LVM volumes.
I have configured a volume group with two logical volumes in it as root and swap.
The entries in the /etc/fstab file show the dm notations namely,
/dev/mapper/VolGroup00-LogVol01... (2 Replies)
hello
my centOS newly installed system loading dmraid modules on startup
I did remove all LVM/raid things from system installation menus and after installation too but dmraid is still there
and he says: no raid disks found
also I did modprobe -r dm_raid45 and it do remove it but only until... (7 Replies)
Hi,
I have a server program that reads data coming in on USB ports. Device paths are in the format: /dev/ttyUSB0
Now, I would like to log data from another device coming in over Ethernet. My first step is trying to track down what the correct device path is which I am unsure of.
Anyone... (9 Replies)
Good morning
Recently we needed to change the password from a redhat 6.5 system that no one knew the root password.
Starting the system with the init=/bin/bash method took us to the following scenario:
system_vg active with only root_lv and tmpfs mounted.
our entries at fstab are like... (1 Reply)
Hi,
How to find the raw device/multipath details of the LUN used by the diskgroups of the database.
file system type -- ASM
Oracle -- 11.2.0.3.0
OS -- Linux
This is RAC database.
Regards,
Maddy (2 Replies)
Hi,
I am testing on iSCSI + multipath, where i have one iSCSI lun assigned to one server.
mpatha (1IET 00010001) dm-2 IET,VIRTUAL-DISK
size=100M features='0' hwhandler='0' wp=rw
|-+- policy='round-robin 0' prio=1 status=active
| `- 2:0:0:1 sda 8:0 active ready running
`-+-... (6 Replies)
Currently I am using this laborious command
lvdisplay | awk '/LV Path/ {p=$3} /LV Name/ {n=$3} /VG Name/ {v=$3} /Block device/ {d=$3; sub(".*:", "/dev/dm-", d); printf "%s\t%s\t%s\n", p, "/dev/mapper/"v"-"n, d}'
Would like to know if there is any shorter method to get this mapping of... (2 Replies)
Hello,
I am trying to setup a storage server with salvaged equipments:
QSSC-S4R server, with QLogic 2562 FC HBA's
Clariion KTN-STL4 4GB FC Enclosures
Disks Salvaged from EMC Vmax
Disks are 520B sector size so i converted to 512B in linux environment and create multipath successfully. But... (4 Replies)
Discussion started by: amd103
4 Replies
LEARN ABOUT OSX
rtprio
RTPRIO(2) BSD System Calls Manual RTPRIO(2)NAME
rtprio -- examine or modify a process realtime or idle priority
LIBRARY
Standard C Library (libc, -lc)
SYNOPSIS
#include <sys/types.h>
#include <sys/rtprio.h>
int
rtprio(int function, pid_t pid, struct rtprio *rtp);
DESCRIPTION
The rtprio() system call is used to lookup or change the realtime or idle priority of a process.
The function argument specifies the operation to be performed. RTP_LOOKUP to lookup the current priority, and RTP_SET to set the priority.
The pid argument specifies the process to be used, 0 for the current process.
The *rtp argument is a pointer to a struct rtprio which is used to specify the priority and priority type. This structure has the following
form:
struct rtprio {
u_short type;
u_short prio;
};
The value of the type field may be RTP_PRIO_REALTIME for realtime priorities, RTP_PRIO_NORMAL for normal priorities, and RTP_PRIO_IDLE for
idle priorities. The priority specified by the prio field ranges between 0 and RTP_PRIO_MAX (usually 31). 0 is the highest possible prior-
ity.
Realtime and idle priority is inherited through fork() and exec().
A realtime process can only be preempted by a process of equal or higher priority, or by an interrupt; idle priority processes will run only
when no other real/normal priority process is runnable. Higher real/idle priority processes preempt lower real/idle priority processes.
Processes of equal real/idle priority are run round-robin.
RETURN VALUES
The rtprio() function returns the value 0 if successful; otherwise the value -1 is returned and the global variable errno is set to indicate
the error.
ERRORS
The rtprio() system call will fail if
[EINVAL] The specified prio was out of range.
[EPERM] The calling process is not allowed to set the realtime priority. Only root is allowed to change the realtime priority of
any process, and non-root may only change the idle priority of the current process.
[ESRCH] The specified process was not found.
SEE ALSO nice(1), ps(1), rtprio(1), setpriority(2), nice(3), renice(8)AUTHORS
The original author was Henrik Vestergaard Draboel <hvd@terry.ping.dk>. This implementation in FreeBSD was substantially rewritten by David
Greenman.
BSD July 23, 1994 BSD