# ioscan -f | grep disk
Class I H/W Path Driver S/W State H/W Type Description
disk 3 0/0/2/0.0.0.0 sdisk CLAIMED DEVICE TEAC DV-28E-N
disk 1 0/1/1/0.0.0 sdisk CLAIMED DEVICE HP 146 GST3146707LC ... (1 Reply)
Hi,
I had a doubt regarding device mapper notations and their corresponding LVM volumes.
I have configured a volume group with two logical volumes in it as root and swap.
The entries in the /etc/fstab file show the dm notations namely,
/dev/mapper/VolGroup00-LogVol01... (2 Replies)
hello
my centOS newly installed system loading dmraid modules on startup
I did remove all LVM/raid things from system installation menus and after installation too but dmraid is still there
and he says: no raid disks found
also I did modprobe -r dm_raid45 and it do remove it but only until... (7 Replies)
Hi,
I have a server program that reads data coming in on USB ports. Device paths are in the format: /dev/ttyUSB0
Now, I would like to log data from another device coming in over Ethernet. My first step is trying to track down what the correct device path is which I am unsure of.
Anyone... (9 Replies)
Good morning
Recently we needed to change the password from a redhat 6.5 system that no one knew the root password.
Starting the system with the init=/bin/bash method took us to the following scenario:
system_vg active with only root_lv and tmpfs mounted.
our entries at fstab are like... (1 Reply)
Hi,
How to find the raw device/multipath details of the LUN used by the diskgroups of the database.
file system type -- ASM
Oracle -- 11.2.0.3.0
OS -- Linux
This is RAC database.
Regards,
Maddy (2 Replies)
Hi,
I am testing on iSCSI + multipath, where i have one iSCSI lun assigned to one server.
mpatha (1IET 00010001) dm-2 IET,VIRTUAL-DISK
size=100M features='0' hwhandler='0' wp=rw
|-+- policy='round-robin 0' prio=1 status=active
| `- 2:0:0:1 sda 8:0 active ready running
`-+-... (6 Replies)
Currently I am using this laborious command
lvdisplay | awk '/LV Path/ {p=$3} /LV Name/ {n=$3} /VG Name/ {v=$3} /Block device/ {d=$3; sub(".*:", "/dev/dm-", d); printf "%s\t%s\t%s\n", p, "/dev/mapper/"v"-"n, d}'
Would like to know if there is any shorter method to get this mapping of... (2 Replies)
Hello,
I am trying to setup a storage server with salvaged equipments:
QSSC-S4R server, with QLogic 2562 FC HBA's
Clariion KTN-STL4 4GB FC Enclosures
Disks Salvaged from EMC Vmax
Disks are 520B sector size so i converted to 512B in linux environment and create multipath successfully. But... (4 Replies)
Discussion started by: amd103
4 Replies
LEARN ABOUT DEBIAN
trafgen
trafgen(8) netsniff-ng-toolkit trafgen(8)NAME
trafgen - a high-performance zero-copy network packet generator
SYNOPSIS
trafgen [-d|--dev <netdev>][-c|--conf <file>][-J|--jumbo-support] [-x|--interactive][-n|--num <uint>][-r|--rand][-t|--gap <usec>]
[-S|--ring-size <size>][-k|--kernel-pull <usec>][-b|--bind-cpu <cpu>] [-B|--unbind-cpu
<cpu>][-H|--prio-high][-Q|--notouch-irq][-v|--version] [-h|--help]
DESCRIPTION
A high-performance network traffic generator that uses the zero-copy TX_RING for network I/O. For instance, on comodity Gigabit hardware up
to 1,488,095 pps 64 Byte pps have been achieved with trafgen.
OPTIONS
trafgen --dev eth0 --conf trafgen.txf --bind-cpu 0
Use packet configuration trafgen.txf, eth0 as transmission device and CPU0 for binding the process.
OPTIONS
-h|--help
Print help text and lists all options.
-v|--version
Print version.
-d|--dev <netdev>
Device for transmission i.e., eth0.
-c|--conf <conf>
Path to packet configuration file.
-x|--interactive
Start trafgen in interactive mode.
-J|--jumbo-support
Support for 64KB Super Jumbo Frames
-n|--num <uint>
Number of packets to generate before exiting. 0 means forever until SIGINT.
-r|--rand
Randomize packet selection process instead of round-robin.
-t|--gap <uint>
Interpacket gap in microseconds.
-S|--ring-size <size>
Manually set ring size to <size>: mmap space in KB/MB/GB.
-k|--kernel-pull <uint>
Kernel pull from user interval in microseconds. Default value is 10 microseconds.
-b|--bind-cpu <cpu>
Bind to specific CPU (or CPU-range).
-B|--unbind-cpu <cpu>
Forbid to use specific CPU (or CPU-range).
-H|--prio-high
Make this high priority process.
-Q|--notouch-irq
Do not touch IRQ CPU affinity of NIC.
EXAMPLES
Generate traffic defined in trafgen.txf on eth0 using CPU 0
trafgen --dev eth0 --conf trafgen.txf --bind-cpu 0
Generate traffic on eth0 using CPU 0, wait 100 us between packets
trafgen --dev eth0 --conf trafgen.txf --bind-cpu 0 --gap 100
Generate 100,000 packet on eth0 using CPU 0
trafgen --dev eth0 --conf trafgen.txf --bind-cpu 0 --num 100000
AUTHOR
Written by Daniel Borkmann <daniel@netsniff-ng.org>
DOCUMENTATION
Documentation by Emmanuel Roullit <emmanuel@netsniff-ng.org>
BUGS
Please report bugs to <bugs@netsniff-ng.org>
2012-06-29 trafgen(8)