11-20-2009
Solaris 10 and DELL TL-2000 Tape Library with ISCSI
Hello,
i am trying to get following configuration up running, but get no access to the library roboter.
Server: SunOS 5.10 Generic_138889-03 i86pc i386 i86pc
DELL TL-2000: 1 Tape: IBM ULT3580-HH4 and Robot: 3573-TL,
connected via ISCSI Bridge (build into the TL)
Backup software: bacula
i see both iSCSI connections:
(sudo iscsiadm list discovery-address -v)
Discovery Address: 192.168.100.14:3260
Target name: iqn.1988-11.com.dell.200ade:eui.5000e11132111002.1
Target address: 192.168.100.14:3260, 1
Target name: iqn.1988-11.com.dell.200ade:eui.5000e11132111002.0
Target address: 192.168.100.14:3260, 1
now i plumb the devices:
(sudo iscsiadm list target -S)
Target: iqn.1988-11.com.dell.200ade:eui.5000e11132111002.0
Alias: eui.5000e11132111002.0
TPGT: 1
ISID: 4000002a0000
Connections: 1
LUN 0
Vendor: IBM
Product: ULT3580-HH4
OS Device Name: /dev/rmt/0
Target: iqn.1988-11.com.dell.200ade:eui.5000e11132111002.1
Alias: eui.5000e11132111002.1
TPGT: 1
ISID: 4000002a0000
Connections: 1
ok, so the tape device was created but not the library robot, but why?
why is not at the second iscsi id the vendor name and device name presented?
i do not have a device /dev/sg* and no directory /dev/scsi.
So i looked for information about sg and libraries, found some infos about the files /kernel/drv/sgen.conf and /kernel/drv/st.conf and define there the name="sgen" ... and "st" ...
Can make a (sudo mt -f /dev/rmt/0 status) but get no information because no tape is loaded.
Rebooted the server, but still no library.
Do i need a special device driver? There is the IBM devdrv site, aber no file for SUN Solaris 10 on intel386 - only x64 ... bad ...
btw: where do i find a installable version of mtx for Solaris 10 i386 ?
Need your help.
Thank You.
Greetings
ast
Last edited by austin73; 11-20-2009 at 09:27 AM..
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I picked up this library but I cannot get the device to actuate.
How do I make this work with Solaris 7? (2 Replies)
Discussion started by: n9ninchd
2 Replies
2. AIX
Hello every body, I have one tape library 3583 but I can't install this some body have ben installed??
when I tray to install it, the output is the next:
Method error (/etc/methods/cfgAtape):
0514-022 The specified connection is not valid.
some Idea??
thanks
greetings (5 Replies)
Discussion started by: xanatos
5 Replies
3. AIX
I am having my 14 Aix 5.3 servers on bladecenters connected with my Tape Library.
I had a backup scheduled on tape library but after taking backup successfully,
Now,
Question 1:-
I wanted to restore backup but tape library could not recognize the tape and I get I/O error in TSM. I think it... (0 Replies)
Discussion started by: Shrek
0 Replies
4. Solaris
Hi all ,
Anybody has an installation manual for Sun StorageTek C4 tape library . i am trying to do the installation on a Sun Fire V245 .
Thanks a million
cheers
ppass (4 Replies)
Discussion started by: ppass
4 Replies
5. Solaris
Env:
Server : Sparc Ultra-80
OS: Solaris 10
Direct SCSI connection to Library. Terminator connected at the Tape End.
Problem: Unable to see any device file related to Robotic /dev/rsst0.
Unable to see any device file /dev/rmt.
------------
Messages while the machine boots
sst0: No... (3 Replies)
Discussion started by: amqstam
3 Replies
6. SCO
I was asked to get a Dell PowerEdge 2600 server, out of warranty, running SCO 3.2v5.06 to perform a full backup. I spent hours researching and preparing a strategy only to fail on-site.
The only device names in /dev for a tape drive were
/dev/xStp0
/dev/xcdt0
/dev/xct0
... (6 Replies)
Discussion started by: ezlarry
6 Replies
7. UNIX for Dummies Questions & Answers
how to change ethernet cable of iscsi initiator (iscsi client) (0 Replies)
Discussion started by: pankajd
0 Replies
8. UNIX for Advanced & Expert Users
I'm using Bacula as my backup system, with full backups going to an LTO2 tape drive, while differentials and incrementals go to a disk array on my main server, babylon4. The tape drive is currently attached to a separate machine, because babylon4 does not have a SCSI controller, nor a free PCI-X... (0 Replies)
Discussion started by: Phil Stracchino
0 Replies
9. Emergency UNIX and Linux Support
Hi All,
We have patched our solaris 10 u4 server with lustarter patch in order to get it prepared for solaris live upgrade.The patch installation went pretty fine and we did reboot the server after patching.But after patching we have noticed O.S is not able to detect tape library.Not sure what... (22 Replies)
Discussion started by: sahil_shine
22 Replies
10. Solaris
Hi,
Our environment is SUN Solaris. We have purchased HP EML 103e tape library. Can you please let me know do I need to install any Driver of newly added Tape Library to see from the Solaris Host? or how can i see the tape library from my Solaris hosts.
Thanks,
Hassan (0 Replies)
Discussion started by: M_Hassan
0 Replies
LEARN ABOUT DEBIAN
tgt-setup-lun
tgt-setup-lun(8) System Manager's Manual tgt-setup-lun(8)
NAME
tgt-setup-lun - creates a target, adds a device to the target and defines initiators that can connect to the target
SYNOPSIS
tgt-setup-lun -d device -n target_name [initiator_IP1 initiator_IP2 ...] [-h]
DESCRIPTION
Starts tgtd if necessary and creates a target according to the supplied target_name. The format of the target name is as follows:
iqn.2001-04.com.<hostname>-<target_name> The target name must be unique.
The script then adds the requested device to the target. If specific IP addresses are defined, it adds them to the list of allowed initia-
tors for that target. If no IP addresses is defined, it defines that the target accepts any initiator.
EXAMPLES
Create a target that uses /dev/sdb1 and allows connections only from 192.168.10.81:
tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81
Create a target that uses /dev/sdb1 and allows connections only from 192.168.10.81 and 192.168.10.82:
tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81 192.168.10.82
Create a target that uses /dev/sdb1 and allows connections from any initiator:
tgt-setup-lun -d /dev/sdb1 -n my_target
Display help:
tgt-setup-lun -h
AUTHOR
Written by Erez Zilber
REPORTING BUGS
Report bugs to <stgt@vger.kernel.org>
COPYRIGHT
Copyright (C) Voltaire Ltd. 2008.
tgt-setup-lun(8)