11-12-2009
k_trap - Kernel mode trap type 0x0000000E:
Is a page mode fault, (memory error) although it could be the cache memory on the DAC960 controller.
The only reference that I found to the second trap suggested that it had to do with the scsi controller (was on an HP system though.)
Its probably time to consider replacement. SCO 5.0.5 will not run on a P4, but 5.0.6 will. 5.0.7 or 6.0 will require new licensing, but you won't need the multiprocessor license (SMP); a single new processor should be more than equal the two old processors. The 10 user license will install on both 5.0.7 and 6.0 Switching to Linux will probably require at a minimum replacement of the database manager/compiler/run_time that the application software uses. If the Digiboard is ISA or EISA then it will be unusable.
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
Hi friends,
i am getting the following error while booting my system which has SCo UNIX .
=========================
H iinit
PANIC: srmountfun-Error 22
mounting of rootdev hd(1/42)
cannot dump 40863 pages to dempdev hd(1/41) : Space for only 0 pages.
Dump not completed.
safe to power off... (3 Replies)
Discussion started by: sveera
3 Replies
2. SCO
hi, i m a newbie and installed sco unix on my machine. Also i installed win-xp. i tried to modify the boot.ini file but it does not give me a choice in the begining.
please guide me on this. do we get a boot loader for unix like LILO or GRUB?
:confused: (3 Replies)
Discussion started by: 187final
3 Replies
3. Solaris
I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
Discussion started by: kymberm
3 Replies
4. SCO
anyone know where I can download or get a boot disk for sco unix v/386? I have an old PC running sco unix v/386 3.2. I dont have an install or boot disk. I need to reset the root password. I have looked all over the internet and cannot find it anywhere. any help would be greatly appreciated.... (5 Replies)
Discussion started by: format
5 Replies
5. AIX
Hello:
NOOB here. I attempted to use smit mkcd. Failed on first attempt, not enough space. 2nd attempt tried to place iso on /usr, not enough space there. Cleanup ran for about 5 minutes after aborting. Now AIX won't boot. LCD display on 7029-6E3 says: 0517 MOUNT /USR. Attempted to boot from CD... (11 Replies)
Discussion started by: bbird
11 Replies
6. Hardware
Hello, I am new to the UNIX community, however I have a beginner's level understanding of a majority of the basic commands in UNIX.
Today, my teacher gave me her old AT&T UNIX PC. I brought it home, turned it on, and got a completely green screen. I turned it off, and back on and it booted... (12 Replies)
Discussion started by: _dhoepp
12 Replies
7. UNIX for Dummies Questions & Answers
UNIX sco release 5.05 system does not boot:cannot open device hd(40)/boot
stage 1 boot failure: error loading hd(40)/bootWhat to do? (2 Replies)
Discussion started by: Joaoalpande
2 Replies
8. SCO
UNIX sco release 5.05 system does not boot:
cannot open device hd(40)/boot
stage 1 boot failure: error loading hd(40)/boot
what to do? (1 Reply)
Discussion started by: Joaoalpande
1 Replies
9. UNIX for Advanced & Expert Users
UNIX sco release 5.05 system does not boot:
cannot open device hd(40)/boot
stage 1 boot failure: error loading hd(40)/boot
what to do? (5 Replies)
Discussion started by: Joaoalpande
5 Replies
10. SCO
hi
i have image SCo Unix 5.0.6 and I want transfer on my HP ML350 G5
after Transfer show this message :
boot not found
cannot open
stage 1 boot failure: error loading hd (40)/boot
this hp server used smart array E200i and P400 and sco not recognized HDD
tanks (7 Replies)
Discussion started by: moein.mojtaba
7 Replies
FPA(4) BSD Kernel Interfaces Manual FPA(4)
NAME
fpa, fea -- device drivers for DEC FDDI controllers
SYNOPSIS
device fpa
device fea
FreeBSD only:
device fddi
DESCRIPTION
The fpa and fea device drivers provide support for the DEC DEFPA PCI FDDI Controller and the DEC DEFEA EISA FDDI Controller, respectively.
All variants of either controller are supported including the DAS and SAS configurations.
DIAGNOSTICS
fea%d: error: desired IRQ of %d does not match device's actual IRQ (%d) The device probe detected that the DEFEA board is configured for a
different interrupt than the one specified in the kernel configuration file.
fea%d: error: memory not enabled! ECU reconfiguration required The device probe found that no device memory had been configured on the
DEFEA. Although the DEFEA can be configured with no device memory, this driver requires a minimum of 1K device memory to be set up. The ECU
(EISA Configuration Utility) will need to be run to change the settings.
CAVEATS
Normally, the device driver will not enable the reception of SMT frames. However if the IFF_LINK1 flag is set, the device driver will enable
the reception of SMT frames and pass them up to the Berkeley Packet Filter for processing.
SEE ALSO
arp(4), netintro(4), ifconfig(8)
AUTHORS
The fpa and fea device drivers and this manual page were written by Matt Thomas.
BSD
March 13, 1995 BSD