11-04-2009
i can't read hard disk scsi
i was installing i my computer windows xp and sco
when i use knoppix5.0 live to read scsi partition wish sco was installing
show me message that i have not permission to acces in scsi hard drive
help me please
10 More Discussions You Might Find Interesting
1. Filesystems, Disks and Memory
I was using an external SCSI disk on a Sun Ultra60 (Solaris 7) as the boot device. It was labelled c1t0d0. I then moved it into the internal removable mounts and it should become c0t0d0, but it apparently didn't change properly. When the machine boots, it gets host information from the disk... (2 Replies)
Discussion started by: Solaris
2 Replies
2. UNIX for Dummies Questions & Answers
Hello agian !
What is the difference between SCSI and IDE hard disks ?
I have Intel PC and when i check i have Generic IDE TYPE DISK0
is IDE hard disk is ok for Solrais ? or should i buy the SCSI hard disk ?
Thanks
Abid Malik (3 Replies)
Discussion started by: abidmalik
3 Replies
3. Filesystems, Disks and Memory
Hi
I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Discussion started by: sirbijan
0 Replies
4. UNIX for Dummies Questions & Answers
Someone gave me a small external SCSI hard drive for my SunOS 5.8 test system. How do I make Unix see the hard drive? (2 Replies)
Discussion started by: FredSmith
2 Replies
5. Solaris
Guys,
I have googled and checked this forum in detail and couldn't find any satisfactory answers for my problem.
I am trying to connect a external SCSI hard Drive(Sea Gate) to a Ultra 80.
I connected it powered it up and at OK prompt did : boot -r
system comes up and complains about not... (6 Replies)
Discussion started by: ajnabi
6 Replies
6. SCO
hi
I've a fresh installation of SCO 5.0.7 on the IDE hard disk.
For SCSI hard disk I can declare, for example blc disk driver using:
# mkdev hd 0 SCSI-0 0 blc 0but it works for IDE hard disk? (3 Replies)
Discussion started by: ccc
3 Replies
7. Linux
Hi all,
I'm kind of new to programming in Linux & c/c++. I'm currently writing a FileManager using Ubuntu Linux(10.10) for Learning Purposes. I've got started on this project by creating a loopback device to be used as my virtual hard disk. After creating the loop back hard disk and mounting it... (23 Replies)
Discussion started by: shen747
23 Replies
8. SCO
OK group, it's been 12 years since I worked with SCO. I need some direction here:
SCO Openserver 5.07
I have a server with a bad motherboard. I have moved the SCSI adapter and hard drive to another computer. This new server has different hardware so I must install the chipset drivers for... (1 Reply)
Discussion started by: jscholz
1 Replies
9. Solaris
To Solaris 8 Experts,
Please let me know what's the best method / procedure as well as the Solaris 8 commands for accomplishing the following tasks on a production Sun Enterprise 250 Server running Sun Solaris 8 Operating System:
1. Make an exact image/copy of the SCSI Hard Drive in the... (3 Replies)
Discussion started by: ssabet
3 Replies
10. Solaris
Hi,
I have a Sun Fire V440 server that fails to boot up correctly. A lot of services are not started and the sytems acts really slow to commands. During boot I can see the following Error:
WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
SCSI transport failed: reason 'reset': retrying... (15 Replies)
Discussion started by: oliwei
15 Replies
SRAW(8) System Manager's Manual SRAW(8)
NAME
sraw - benchmark raw scsi I/O performance under linux
SYNOPSIS
sraw [ -fiv6 ] scsi-device [ bstart [ bstep ] ]
DESCRIPTION
This program basically reads the specified scsi device and measures the throughput. Note that the filesystem *AND* the buffer cache are
bypassed by this code, this program was designed to benchmark the naked scsi drivers by themselves without the need to account for the
overhead of any other portion of the kernel. It also could be used to benchmark disk read throughput.
This program does a series of reads of the disk, of consecutive areas on the disk. The device is first queried to determine the sector
size for the device, and then the series of reads is begun. About 5.0 Mb is read from the device, and then the performance numbers are
reported. Note that since the buffer cache is completely bypassed, there is no need to be concerned about cache hits or anything.
Output of sraw is a set of lines, 4 numbers per line: blocksize, elapsed time, nblocks and throughput (in bytes per second).
scsi-device is either a block device (e.g. /dev/sda, /dev/scd0) or a generic SCSI device (e.g. /dev/sg0).
OPTIONS
-f set FUA (Force Unit Access) bit during read. Data is then read from media instead of internal drive cache.
-i use legacy ioctl instead of new SG I/O layer (will not work on 2.6 kernel and block devices).
-v more verbose output.
-6 use 6-bytes instead of 10-bytes read command. In this case, only the first GB of data could be read from media.
bstart starting block to check different zones on ZBR discs
bstep factor for sequential stepping, default 1. Use 0 for reading always the same blocks (from cache)
ERRORS
sraw could issue input/output errors when reading too many blocks at the same time from a block device like /dev/sda. To get rid of them,
use /dev/sgN instead.
AUTHOR
sraw was first written by Eric Youngdale. Extensions (-v, -f, -6, SG IO, man page) were written by Eric Delaunay.
SEE ALSO
sg_dd(8) from sg3-utils package.
AVAILABILITY
sraw is available at
ftp://tsx-11.mit.edu/pub/linux/ALPHA/scsi/
Nov 1993 SRAW(8)