I have experienced Sun V880s which would not boot from a DVD-RW disc, had to use a DVD-R(or DVD+R but not DVD+RW if you see what I mean!), presumably if a frimware upgrade were available for the DVD-ROM drive that might be fixed..
I'm running a Ultra 60 and having problems booting from the cdrom. This is the error I get,
Boot device: /pci@1f,4000/scsi@3/disk@6,0:f File and args:
The file just loaded does not appear to be executable.
Any know what could be the problem here? I've even tried connecting a 2nd cdrom... (3 Replies)
my redhat 9 will not boot. We had a power failure and when the power came back, my redhat linux will not boot.
The machine come up to grub prompt.
I tried the following from grub prompt
root (hd0, then press tab key
partition num:0 filesystem type unknown, partition type 0x83... (7 Replies)
I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
I want to install Solaris 9 on SUN ULTRA 10. The cdrom is attached to an ide controller. The server is currently running Solaris 2.6
I insert Solaris cd 1 of 2 and at the ok prompt I type boot cdrom i get the error below
Boot device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f file and args:... (11 Replies)
i am having a problem when trying to boot from cdrom. I received the below message
system is not bootable, boot command is disabledfound
how can i fix this.
also what is the key combination on ordinary keyboard for STOP+A. Is it ctrl+break? (2 Replies)
Hi all am trying to boot the system from cdrom in single user mode , however when i am giving command boot cdrom -s i am getting below error
Boot Device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0: f file and args:
Can't read disk label
Can't open disk label package
can,t open boot device
... (17 Replies)
iam traying to install o/s in spark machine it showing error
ok >boot cdrom
is showing error
short disk read
failed to read superblock
the file just loaded does not appear to excutable
how to solve this can u help me (6 Replies)
I have a server with a scsi raid controller (for hard drives) and a scsi controller (for tape drive and cd-rom). I am trying to boot from the cd-rom but can't. During boot up, bootable media is detected in the cd-rom but the system will not boot from it. BIOS for the raid controller installs but... (1 Reply)
Good Afternoon,
I'm trying to boot from cdrom so I:
bash-2.05# init 0
{1} ok boot cdrom -s and I get:
Rebooting with command: boot cdrom -s
Boot Device: /pci@1e,600000/ide@d/cdrom@2,0:f File and args: -s
Can't read disk label.
Can't open disk label package
Evaluating:
Can't open boot... (13 Replies)
Discussion started by: Stellaman1977
13 Replies
LEARN ABOUT DEBIAN
bootcdbackup
BOOTCDBACKUP(1) bootcd utils BOOTCDBACKUP(1)NAME
bootcdbackup - create a bootable offline backup of a unix system
SYNOPSIS
bootcdbackup [-i] [-v] [-s] [-c <config directory>] [-url <url] [-nomount] [-2diskconf <file>] <dev> <name> <builddir>
DESCRIPTION
bootcdbackup creates a offline backup from a installed system. You need a running bootcd to boot the system with. This CD/DVD is booted on
the system and bootcdbackup creates a bootable CD/DVD with the bootcd kernel and the backup disk as tar-file.
To restore or clone the system, boot the CD/DVD image and install it with bootcd2disk -c <name> on the system.
bootcdbackup can try to discover the disk partition by searching for fstab on the given partition. A other way to backup the partition ta-
ble is the program bootcdmk2diskconf which creates a configuration file on a running system.
OPTIONS -i The bootcdbackup runs in interactive mode and you can run each function manually. This option is useful for debugging.
-v The option "-v" (verbose) adds messages on running.
-s This option can be used to disable interactive questions and to try to ignore errors.
-c <config directory>
The configuration directory which includes the file "bootcdbackup.conf", default is "/etc/bootcd".
-url <url>
If bootcdbackup is slow on your system (because of a slow CD/DVD drive or the HP ILO virtual CD interface), you can use an image server
to get the image from.
bootcdbackup use the SWAP partition of your upcoming system as temporary space and copy the image from the configured image server to
this partition and use it as image. The image server url is configured with this option.
-nomount
The target disk should not be mounted and no search for fstab is done.
--cpio
Normally as backup tool star will be used if selinux files have to be backed up and cpio will be used if not. With this option the
usage of cpio can be forced.
--star
Normally as backup tool star will be used if selinux files have to be backed up and cpio will be used if not. With this option the
usage of star can be forced.
-2diskconf <file>
The parameter configures a bootcd2disk.conf for the restore of the system done by bootcd2disk. The configuration file can be created
with the command bootcdmk2diskconf.
<dev>
Configures the device where bootcdbackup finds the file "fstab" and discover the configuration for the restore.
<name>
The name of the backup (no blanks!) is used on the creation time and to restore the backup with bootcd2disk -c <name>.
<builddir>
Builddir is an directory on the backup system where bootcdbackup build the backup CD/DVD. Space for the CD/DVD image, for compression
and the data is needed!
All other configuration has to be done in the config files.
FILES
/etc/bootcd/bootcdbackup.conf
Configuration for bootcdbackup.
SEE ALSO
Documentation in bootcdbackup.conf
bootcdbackup.conf(5), bootcd(1), bootcdflopcp(1), bootcdwrite(1)AUTHOR
This manual page was written by Bernd Schumacher <bernd.schumacher@hp.com> and Carsten Dinkelmann <Carsten.Dinkelmann@foobar-cpa.de> for
the Debian GNU/Linux system (but may be used by others).
bootcdbackup 2007-07-05 BOOTCDBACKUP(1)