can you elaborate on the cdrom thing? when you power down the system, put in a cd and power up, you can't get it to boot off cd? i take it the system auto-boots from disk?
That's exactly it. Frustrating.
---------- Post updated at 11:26 AM ---------- Previous update was at 09:41 AM ----------
OK, past the ALOM password issue. I sat there and guessed passwords for an hour and found it
Now I'm at the sc prompt and enter poweron so that I can get to console and the ok prompt. I can't get past it attempting to poweron and looping as seen below:
I'm running a Ultra 60 and having problems booting from the cdrom. This is the error I get,
Boot device: /pci@1f,4000/scsi@3/disk@6,0:f File and args:
The file just loaded does not appear to be executable.
Any know what could be the problem here? I've even tried connecting a 2nd cdrom... (3 Replies)
my redhat 9 will not boot. We had a power failure and when the power came back, my redhat linux will not boot.
The machine come up to grub prompt.
I tried the following from grub prompt
root (hd0, then press tab key
partition num:0 filesystem type unknown, partition type 0x83... (7 Replies)
I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
I want to install Solaris 9 on SUN ULTRA 10. The cdrom is attached to an ide controller. The server is currently running Solaris 2.6
I insert Solaris cd 1 of 2 and at the ok prompt I type boot cdrom i get the error below
Boot device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f file and args:... (11 Replies)
i am having a problem when trying to boot from cdrom. I received the below message
system is not bootable, boot command is disabledfound
how can i fix this.
also what is the key combination on ordinary keyboard for STOP+A. Is it ctrl+break? (2 Replies)
Hi all am trying to boot the system from cdrom in single user mode , however when i am giving command boot cdrom -s i am getting below error
Boot Device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0: f file and args:
Can't read disk label
Can't open disk label package
can,t open boot device
... (17 Replies)
iam traying to install o/s in spark machine it showing error
ok >boot cdrom
is showing error
short disk read
failed to read superblock
the file just loaded does not appear to excutable
how to solve this can u help me (6 Replies)
I have a server with a scsi raid controller (for hard drives) and a scsi controller (for tape drive and cd-rom). I am trying to boot from the cd-rom but can't. During boot up, bootable media is detected in the cd-rom but the system will not boot from it. BIOS for the raid controller installs but... (1 Reply)
Good Afternoon,
I'm trying to boot from cdrom so I:
bash-2.05# init 0
{1} ok boot cdrom -s and I get:
Rebooting with command: boot cdrom -s
Boot Device: /pci@1e,600000/ide@d/cdrom@2,0:f File and args: -s
Can't read disk label.
Can't open disk label package
Evaluating:
Can't open boot... (13 Replies)
Discussion started by: Stellaman1977
13 Replies
LEARN ABOUT DEBIAN
tpm_nvread
tpm_nvread(8)tpm_nvread(8)NAME
tpm_nvread
SYNOPSIS
tpm_nvread [OPTIONS]
DESCRIPTION
tpm_nvread reads data from an NVRAM area and either displays them or writes them into a file. The user must provide the index of the NVRAM
area. If the user provided the number of bytes to read then this will be the maximum number of bytes that will be read from the NVRAM area,
otherwise the whole NVRAM area will be read. Some NVRAM areas only allow read sizes of zero, i.e., NVRAM area with index 0. Optionally an
offset into the NVRAM area can be given where the reading of the data is to start. If the NVRAM area has permission bits set that require
owner or NVRAM area authentication, then the password must be provided via the password option.
The following options are supported:
-h, --help
Display command usage info.
-v, --version
Display command version info.
-l, --log [none|error|info|debug]
Set logging level.
-u, --unicode
Use TSS UNICODE encoding for passwords to comply with applications using TSS popup boxes
-z, --well-known
Use a secret of all zeros (20 bytes of zeros) as either the NVRAM area or owner secret.
-p, --password
Depending on what type of authentication is required for the NVRAM area, this must either be the NVRAM area or owner password.
A password may be directly provided for example by using '--password=password' or '-ppassword'. If no password is provided then the
program will prompt the user for the password.
-i, --index
The index of the NVRAM area. The parameter may either be a decimal number or a hexadecimal number starting with '0x'.
-s, --size
The number of bytes to read from the NVRAM area. The parameter may either be a decimal number or a hexadecimal number starting with
'0x'.
-n, --offset (optional parameter)
The offset into the NVRAM area from where to start reading. The parameter may either be a decimal number or a hexadecimal number
starting with '0x'.
-f, --filename (optional parameter)
The name of a file the read data will be written into. If no filename is given the data will be printed to stdout.
SEE ALSO tpm_nvdefine(8), tpm_nvinfo(8), tpm_nvrelease(8), tpm_nvwrite(8)REPORTING BUGS
Report bugs to <trousers-users@lists.sourceforge.net>
TPM Management 2011-07-11 tpm_nvread(8)