10-19-2009
If you can boot from the hard drive(s) you should be able to use scadm to reset ALOM and eeprom to set OBP.
Have you tried to boot without hard drive(s) installed? If so- what happened?
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I'm running a Ultra 60 and having problems booting from the cdrom. This is the error I get,
Boot device: /pci@1f,4000/scsi@3/disk@6,0:f File and args:
The file just loaded does not appear to be executable.
Any know what could be the problem here? I've even tried connecting a 2nd cdrom... (3 Replies)
Discussion started by: merlin
3 Replies
2. Red Hat
my redhat 9 will not boot. We had a power failure and when the power came back, my redhat linux will not boot.
The machine come up to grub prompt.
I tried the following from grub prompt
root (hd0, then press tab key
partition num:0 filesystem type unknown, partition type 0x83... (7 Replies)
Discussion started by: hassan2
7 Replies
3. Solaris
I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
Discussion started by: kymberm
3 Replies
4. Solaris
I want to install Solaris 9 on SUN ULTRA 10. The cdrom is attached to an ide controller. The server is currently running Solaris 2.6
I insert Solaris cd 1 of 2 and at the ok prompt I type boot cdrom i get the error below
Boot device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f file and args:... (11 Replies)
Discussion started by: Msororaji
11 Replies
5. Solaris
i am having a problem when trying to boot from cdrom. I received the below message
system is not bootable, boot command is disabledfound
how can i fix this.
also what is the key combination on ordinary keyboard for STOP+A. Is it ctrl+break? (2 Replies)
Discussion started by: shabu
2 Replies
6. Solaris
Hi all am trying to boot the system from cdrom in single user mode , however when i am giving command boot cdrom -s i am getting below error
Boot Device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0: f file and args:
Can't read disk label
Can't open disk label package
can,t open boot device
... (17 Replies)
Discussion started by: kumarmani
17 Replies
7. Solaris
iam traying to install o/s in spark machine it showing error
ok >boot cdrom
is showing error
short disk read
failed to read superblock
the file just loaded does not appear to excutable
how to solve this can u help me (6 Replies)
Discussion started by: tirupathi
6 Replies
8. Solaris
Hi community,
Does anyone can tell me the difference between "boot cdrom" and "boot cdrom - install" ?
Thank you very much:D (3 Replies)
Discussion started by: Sunb3
3 Replies
9. Hardware
I have a server with a scsi raid controller (for hard drives) and a scsi controller (for tape drive and cd-rom). I am trying to boot from the cd-rom but can't. During boot up, bootable media is detected in the cd-rom but the system will not boot from it. BIOS for the raid controller installs but... (1 Reply)
Discussion started by: powwm
1 Replies
10. UNIX for Beginners Questions & Answers
Good Afternoon,
I'm trying to boot from cdrom so I:
bash-2.05# init 0
{1} ok boot cdrom -s and I get:
Rebooting with command: boot cdrom -s
Boot Device: /pci@1e,600000/ide@d/cdrom@2,0:f File and args: -s
Can't read disk label.
Can't open disk label package
Evaluating:
Can't open boot... (13 Replies)
Discussion started by: Stellaman1977
13 Replies
LEARN ABOUT SUNOS
installboot
installboot(1M) installboot(1M)
NAME
installboot - install bootblocks in a disk partition
SYNOPSIS
installboot bootblk raw-disk-device
The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition.
The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be
found using the -i option of uname(1).
The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead.
bootblk The name of the bootblock code.
raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read-
able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.
Example 1: Installing UFS Boot Block
To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:
example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk
/dev/rdsk/c1t0d0s0
/usr/platform/platform-name/lib/fs/ufs
directory where ufs boot objects reside.
/platform/platform-name/ufsboot
second level program to boot from a disk or CD
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)
WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.
11 Apr 2005 installboot(1M)