hi. Im trying to install a switch.
And the manual says i should type a command including a SerialPortDevicePath. which is the filepath to serial port used for connection.
However.. nothing about how to find this info.
Could anyone help me where to find this path?
thx
mr.T (6 Replies)
I have installed aix 5.2 on aix box through serial console connected to COM 1 . I even get a login prompt after the fresh installation . But as soon as i give a root & enter i again get a login prompt.i..e I am not able to logon after a fresh installation.
and even i configured IP configuration... (0 Replies)
I am trying to access DG-100 gps logger on Mac OS X with POSIX API. The device uses a Prolific usb-serial controller, and connect to the usb port on my mac.
After I install the Prolific driver, it shows up as /dev/tty.usbserial and /dev/cu.usbserial. The vendor has published the data format. So... (1 Reply)
Hey!
I'm trying to figure out a sollution for a problem I have at my company with an Iomega MiniMax 500 GB USB disk.
If i run cat /proc/bus/usb/devices
I get this information:
T: Bus=01 Lev=02 Prnt=04 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00... (2 Replies)
Hi community,
I've currently working on SUN Server V490 and I'm connecting with a Serial port (I DON'T HAVE ANY IP CONNECTIVITY)...I need to redirect the graphic interface of Oracle with the dbca command; I know a way with an IP Connectivity ( use a X-Server and then setenv DISPLAY... (7 Replies)
I have problem with C programming. I want to send & receive data through serial communication. I send data(command) to device to get data from device but when receive data, it can't get altogether of data.
It get only some data. What should I do to get altogether of data?
If all of... (7 Replies)
Hello all.
I have an old computer with M$-DOS 7. I want to use it like a dumb terminal, with telnet. I need to connect it to my desktop These are my questions:
How can i configure the serial port on dos?
How can i telnet form dos to the serial port?
How can i set up a telnet server on the... (12 Replies)
I am trying to change one of my serial printers from /dev/ttyr002 to /dev/ttyr014:
lpstat -s
device for check3: /dev/ttyr002
device for check4: /dev/ttyr002
I changed the tty setting for check3 in:
/etc/printcap
/var/spool/lp/admins/lp/printers/check3
to /dev/ttyr014
Then I get:... (4 Replies)
I'm new to Linux (Ubuntu 16.04), and very new to BASH scripting. I have a Numato 8-channel USB GPIO device, which is a DAQ that appears in the system as a serial port. In Linux it appears as ttyACM0. I can easily manipulate a GPO with, for example:
echo "gpio set 7" > /dev/ttyACM0
...followed... (12 Replies)
Discussion started by: Chalk-X
12 Replies
LEARN ABOUT CENTOS
efikeygen
EFIKEYGEN(1) General Commands Manual EFIKEYGEN(1)NAME
efikeygen - command line tool for generating keys to use for PE image signing
SYNOPSIS
efikeygen <[--ca | -C] [--self-sign | -S] | [--signer=nickname]>
[--token=token | -t token]
[--nickname=nickname | -n nickname]
[--common-name=common name | -c common name]
[--url=url | -u url]
[--serial=serial | -s serial]
DESCRIPTION
efikeygen is a command line tool for generating keys and certificates to be used with pesign. These are standard X.509 certificates, and
can potentially be generated with any certificate creation tool. efikeygen simply sets generates keys with sensible options set for a key
to be used for PE image signing.
OPTIONS --ca The certificate being generated is for a CA.
--self-sign
The generated certificate is to be self signed.
--signer=nickname
Nickname of certificate to be used to sign the generated certificate.
--token=token
Use the specified NSS token's certificate database.
--nickname=nickname
The nickname to use for the generated certificate.
--common-name=common-name
The X.509 Common Name for the generated certificate. This should be in rfc2253 syntax, i.e. "CN=John Doe,OU=editing,O=New York
Times,L=New York,ST=NY,C=US"
--url=url
Informational url regarding objects signed with this key.
--serial=serial number
Serial number for use with this key. A certificate is identified by its signer and its serial number, so it's best not to ever re-
use this value with the same signer.
SEE ALSO pesign(1)AUTHORS
Peter Jones
Mon Jan 07 2013 EFIKEYGEN(1)