10-05-2009
Yes, after running the command reboot -- -r I could see now the creation of new devpath /dev/rmt/1cbn, and through the netbackup software i reconnected the missing path to this one. Things are ok so far and the backup started as expected.
I realy appreciate your help.
---------- Post updated at 01:00 AM ---------- Previous update was at 12:58 AM ----------
I have another request collegues.
I am interested to replace a faulty hard disk which is not mirorred. it is containing ex ./dev/vx/rdsk/Vol1 file system.
But i have some ideas in my mind and I wish if you can correct me if wrong
1- backup the files system using ufsdump utility to a tape
ufsdump 0uf /dev/rmt/0m /Vol1
2- umount the file system
3- Replace the faulty hard disk.
4- create new file system on the new hard disk
newfs /dev/rdsk/c1t1d0s0
5- Mount /Vol1 on the ne file system.
mount /dev/dsk/c1t1d0s0 /Vol1
6- Restore from backup.
ufsrestore -rvf /dev/rmt/0m
Are these steps correct particularly point no 4.?
7 More Discussions You Might Find Interesting
1. Filesystems, Disks and Memory
Hi
I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Discussion started by: sirbijan
0 Replies
2. UNIX for Dummies Questions & Answers
Anyone know how I can map a windows drive to an apache shared drive?
In my httpd.conf file, I have:
Alias /merc_rpts/ "/u/merc_rpts/"
<Directory "/u/merc_rpts">
Options Indexes
</Directory>
I'm able to bring up a browser and see the contents of this folder.
In... (0 Replies)
Discussion started by: gseyforth
0 Replies
3. SCO
Can anybody help me out to mount USB flash /floppy drive in sco openserver 6.0 . (5 Replies)
Discussion started by: sureshdrajan
5 Replies
4. Shell Programming and Scripting
I have input file like this
Input file:
ABC|abc_etc_passwd
XYZ|XYZ_etc_passwd
zXY|XYZ_etc_passwd
IJK|test_etc_passwd
KLM|test_etc_passwd
i want to do following in a loop.
grep 'ABC' *abc_etc_passwd*
grep 'XYZ' *XYZ_etc_passwd*
grep 'ZXY' *ZXY_etc_passwd*
i have tried this
for i... (2 Replies)
Discussion started by: pinnacle
2 Replies
5. Hardware
I have a 320 GB drive which dual boots Windows and Debian:
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal):... (0 Replies)
Discussion started by: phillipsoasis
0 Replies
6. UNIX for Dummies Questions & Answers
Hi Guys,
Can any one help me on this.
I need help to move .csv/.xls file from unix path to windows shared drive or c:\ drive?
Regards,
LKR (1 Reply)
Discussion started by: lakshmanraok117
1 Replies
7. Solaris
Hi,
I am facing issue with one of the drive is solaris 10. it is showing offline in the messages file
scsi: WARNING: /pci@2,600000/QLGC,qlc@0/fp@0,0/ssd@w5006016746e00b1b,0 (ssd0):
drive offline
genunix: WARNING: Page83 data not standards compliant DGC LUNZ 0430
... (1 Reply)
Discussion started by: Prasanth T K
1 Replies
LEARN ABOUT NETBSD
mlxctl
MLXCTL(8) BSD System Manager's Manual MLXCTL(8)
NAME
mlxctl -- Mylex DAC960 family management utility
SYNOPSIS
mlxctl [-f dev] [-v] [-a] status [drive] [...]
mlxctl [-f dev] [-a] detach [drive] [...]
mlxctl [-f dev] [-a] check [drive] [...]
mlxctl [-f dev] rebuild channel:target
mlxctl [-f dev] cstatus
mlxctl [-f dev] rescan
mlxctl [-f dev] config
DESCRIPTION
The mlxctl utility performs status monitoring and management functions for Mylex DAC960 RAID controllers and attached devices.
The following options are available:
-a Apply the action to all drives attached to the controller.
-f dev Specify the control device to use. The default is /dev/mlx0.
-v Increased verbosity.
The following commands are available:
cstatus Display the controller's current status.
status Display the status of the specified drives. This command returns 0 if all drives tested are online, 1 if one or more drives are
critical and 2 if one or more are offline.
rescan Re-scan the logical drive table, and attach or detach devices from the system as necessary.
detach Detach the specified drives. Drives must be unmounted and unopened for this command to succeed.
check Initiate a consistency check and repair pass on a drive that provides redundancy (e.g., RAID1 or RAID5). This command returns imme-
diately. The status command can be used to monitor the progress of the check.
rebuild Rebuild onto the specified physical drive. Note that there can be only one running rebuild operation per controller at any given
time. This command returns immediately. The cstatus command can be used to monitor the progress of the rebuild.
config Write the current system drive configuration to stdout.
EXAMPLES
Display the status of drive ld3 attached to the controller mlx1:
mlxctl -f /dev/mlx1 -v status ld3
SEE ALSO
ld(4), mlx(4)
HISTORY
The mlxctl command first appeared in NetBSD 1.5.3, and was based on the mlxcontrol utility found in FreeBSD.
BUGS
Modifying drive configuration is not yet supported.
Some commands do not work with older firmware revisions.
Error log extraction is not yet supported.
BSD
April 10, 2000 BSD